If you have a summer cottage, then you probably grow potatoes on it, the cultivation of which will be easier to produce using special tools. Among them, one can distinguish a disk hiller for a walk-behind tractor. With your own hands, this tool can be made with ease. A simple model of this type of hiller can be made from improvised tools.
Making Lister Hobbies
The easiest way to make an okuchnik is to make a model that has a fixed working width. This design is represented by wings that are connected and somewhat apart, as well as fixed to each other. There should be 2 such elements in the equipment. For the reason that the wings remain motionless, it will be impossible to adjust the working width. Therefore, the width between the beds will need to be adapted to the tool, and not vice versa. The do-it-yourself disk hiller for a walk-behind tractor is usually made according to the principle of factory equipment, while the width of the tool is 30 cm, which is not very convenient, because the width between the dispersal of the potatoes implies a parameter of 60 centimeters. As a feature of the lister hills, the presence of thin racks appears. This allows you to withstand the overload of the cultivator during the destruction of the tool in the ground.
Features of a ridger with a variable working width
If you are thinking about how to make disk hills for a walk-behind tractor, you should know that such tools are most convenient if they have a variable working width. This is due to the fact that they have an adjusting mechanism, with its help you can adjust the position of the wings. This allows you to get such a width between rows that can be changed. These ridges are used in tandem with walk-behind tractors, the motor of which demonstrates power within 4 liters. from. and more.
Among the shortcomings of such tools can be identified significant energy intensity. The main advantage of disc hills is the successful combination of a tool with a walk-behind tractor. In the process of using such a tool you will achieve the greatest efficiency.
Propeller-type hiller
Before starting work, it is necessary to study the drawings of the disk hiller for the walk-behind tractor, but if you do not intend to do the manufacturing work yourself, you can purchase a propeller tool. The basis of his work is special propellers, under the influence of which the soil is first crushed, and then weeds are extracted from it. And only then loose soil is used for hilling.
Features of self-made disk hiller
Before you make a disk hiller for a walk-behind tractor with your own hands, you will need to prepare the necessary materials. It will be necessary to use a template made of steel. The thickness of the latter should be equal to 2 millimeters. From the canvas you will need to cut out the halves of the tool. These blanks must be bent until they coincide with the radius, only after which you can begin welding work. Welds should be grinded. If necessary, then the elements need to be welded, and then well cleaned. Ultimately, you should get an even layer of metal, the surface of which should be perfect.
Features of the manufacture of hiller discs
When making a disk hiller for a walk-behind tractor with your own hands, the master should definitely consider the drawings. In addition, it must be remembered that the working blades must be prepared from the same steel density. In order to make a tool, you need to select the type of disc. They will be steel sheets with a thickness of 2 mm. In these components of the hiller there should be lower edges that should be bent. The main condition is that the disks should be located symmetrically in relation to each other. Otherwise, the tool will lead to the side, which will complicate the work of the summer resident. When creating the structure, you can apply the shares that were borrowed from the old seeder. These elements, when making a disk hiller for a walk-behind tractor with your own hands, the drawings of which you can take from our article, should be mounted at an angle. In addition, you will need to withstand a step between the lower points, which should be equal to the width of the wheel track. This option is equivalent to the width between rows. The elements can be mated with each other using bolts; it is acceptable to use a welding machine. Discs must be paired using an adjustable adapter. In addition to disks, the main elements of the tool are racks, screw lanyards, as well as a leash. The last of them must be performed in the form of the letter T.
The Okuchnik disk for a walk-behind tractor should be made using turnbuckles, which are needed in order to adjust the axis of rotation of the disks. This tool should be fixed to the walk-behind tractor by means of a beam that has wings. In the manufacture and installation of parts, the specified size must be carefully observed.
Tool manufacturing options
Do-it-yourself disk hiller for a walk-behind tractor can be performed using one of two technologies. One of them involves the use of a variable, the other - a fixed width of the wings. In the first method, the distance between the disks can be changed by the method of rearranging the racks.
Do-it-yourself disk hiller for a walk-behind tractor can be made in such a way that it is possible to facilitate work with the tool. For this, it is necessary to provide for the presence of plain bearings. Once the bearings are installed, you can increase the reliability of the tool. In this case, do not use slip bushings.
Finally
During the installation of the structure, a hitch bracket must be used to attach the hiller to the walk-behind tractor. To do this, the hiller's leash is fixed to the latter, bolts and a stop should be used. The latter should be installed in the inner space of a square tube, after which the part is pressed tightly against the outer surface. The hitch bracket can be rotated using bolts, while the leash can be located along the longitudinal axis of the walk-behind tractor. After that, we can assume that the hiller disk for the walk-behind tractor is made and ready for work.