Household appliances - not only greatly facilitates the work of housewives, but also takes care of comfort. The washing machine is the main assistant in the house. What if it is time to replace the drain hose?
What to do in case of breakage
Of course, the first thing you might think about calling the wizard. There is only an option that he will not arrive in a few days. Or ask to bring a car to him. Or are you just used to doing everything yourself and not wait for help from outsiders. How to replace the drain hose in the washing machine? The advice of the masters will help you easily cope with this problem. Begin with patience. If this is your first attempt at replacing a hose, keep the instructions in front of your eyes.
When to change the hose
Cars come from different manufacturers. Someone acquires a certain model, assuming good quality, others buy a tried and tested brand. But depending on what kind of machine you have, you will have to work with it in a certain way. The drain hose of the washing machine must be replaced if the part is out of order. It can leak in any area.
It is impossible to repair the hose itself, since it is a corrugated tube. Through it from the machine there is an outflow of dirty water. Like any other element of the mechanism, it can wear out. The hose is too short. This is noticeable immediately after the purchase. But even if you noticed this in the store, employees will not replace the hose.
After some time of use, dirt and mucus may form inside the hose. This contributes to the release of unpleasant odor that enters the machine and then penetrates into the freshly washed laundry.
The hose will not be washed out, as its length and corrugated structure will not allow this. Replace the old part with a new one costs between 60-150 rubles. Of course, you can buy a hose for 1,000 rubles. It will be of special strength, maximum length and, most likely, from a well-known manufacturer. Is it worth it to overpay for this item, in any case, the buyer decides.
What tools will be needed to replace the hose in the washing machine
How to replace the drain hose in the washing machine? What tools are needed? First of all, you need a new hose, which must be installed in place of a worn out one. In addition, you will need:
- A screwdriver, because you have to disassemble a part of the washing machine.
- Pliers with which to disconnect the hose from the washer pump.
- In some particularly difficult cases, you should have a set of wrenches in stock, since it is not possible to replace the drain hose in the washing machine without removing the pump.
The easiest brands to repair
Starting such a simple home appliance repair job, you should know that you can replace the drain hose in a Samsung washing machine in the same way as in Ariston, Beko, Candy, Whirlpool machines.
- To begin with, it is worth disconnecting the car from the electrical network, as well as from the water supply.
- Unfasten the basement wall behind which the pump filter is located.
- Be sure to drain the water from the drainage membrane.
- Then turn the machine on its side so that it is possible to inspect and disassemble the bottom. This is where the pump is located, to which the hose is attached.
Replace the drain hose in the LG washing machine in the same way. When working, you need to follow a certain action plan.
- Disconnect a damaged hose from the pump. It rests, as a rule, on clamps, which can be slightly loosened with pliers.
- Then disconnect it from the pump and the machine body. Be sure to remember or photograph how the old hose is installed, since the new one will have to be attached in the same way.
When the old hose is safely removed, you need to start installing a new one. This is done in the reverse order.
- Attach clamps to the pump, always tightening them.
- Then fix the hose to the body.
- Next, you need to reinstall the machine in place, connecting the corrugation to the drain.
- Bring water to the washing machine.
- Connect to the mains.
For the test, you need to conduct one test washing mode without loading the laundry. This will help identify a potential leak. You can eliminate it by repeating the manipulations according to the specified algorithm, how to replace the drain hose in the washing machine. Then you need to tightly put the hose on the pump and tighten the clamps. Replace the drain hose in the Indesit washing machine according to the above scheme.
When is it better to call specialists
It is more difficult if the cars of the Electrolux or Zanussi firms have settled in your bathroom.
- In this case, you will have to remove the top wall, then the back.
- It is necessary to disconnect the filler valve, armed with a screwdriver if it is kept on self-tapping screws, or with a wrench if bolted.
But the most difficult process is replacing the drain hose in the washing machines of AEG, Bosch and Siemens. When fixing such a minor problem, you will have to disassemble the entire front panel and pull out almost half of the parts. In this case, you will have to remember so many subtleties and nuances that it is easier to find a master who agrees to come to your home and fix a hard-working assistant.
Learning by observing
You can watch the master and learn how to change the hose.
- The specialist removes the clamp and removes the cuff of the hatch, which is located in front of the car.
- Then easily takes out the batcher.
- The next movement detaches the decorative panel, located next to the base.
- Asks you for a floor rag or any unnecessary cloth to lay on the floor, as he will have to pour the remaining water through the pump filter.
- Then it unscrews a pair of bolts from above and from below, which fasten the front panel to the housing of the washing machine.
- Then he grabs the bottom of the panel, pulls himself first, and then down.
Thus, he will have the entire panel in his hands. But that's not all! He has yet to remove the wiring from the hatch lock.
And now you can get down to the main job. It remains only to repeat the actions, the algorithm of which is indicated above.
Of course, a specialist will do it much faster and more reliable than the most executive owner of the machine, who undertook to repair it for the first time. At the same time, self-repair will save money and help you learn how to cope with emerging problems without involving outsiders.