A modern girl, first of all, watches her own hands, because exactly they are her calling card. Now the technology of hardware manicure is pushing a simple ordinary one far back, because it is not only technically more modern, but also saves a lot of time on creating a manicure.
What is a hardware manicure?
The main thing that distinguishes this type of manicure from the usual one is the technique for its implementation. Hardware manicure is performed step by step only on dry nails. They do not need to be steamed first. Also, the cuticle is not completely removed, you should only remove its dead parts.
You can perform hardware manicure at home step by step, or you can contact the specialists. This procedure uses a machine specifically designed for this. It has several nozzles and the ability to perform several operations. Regarding the harm or benefits of the events, it can be said that they will be more sparing, since the skin of the fingers is minimally worried.
Hardware manicure step by step: what nozzles are used?
A very important point when choosing tools and devices for hardware manicure is the selection of a milling machine. Its quality and functionality play a leading role. However, in second place is the number of nozzles in this very machine and their quality. In general, all nozzles are usually divided into two large categories:
At the same time, nozzles can be bought separately, but their parameters should correspond to your typewriter. The material from which they are made plays a key role in their classification. Also, depending on the material, the scope may vary.
Ceramic nozzles
This type of nozzle is made by baking special glue and the abrasive mixed with it. In this case, the abrasive can be of different sizes, which can also distinguish nozzles from each other. If you use this type of nozzles, you will periodically have to clean them, since the recesses in their surface tend to clog.
Ceramic nozzles work with the skin, with nails using them it is not recommended to carry out any procedures. Also, in no case with these nozzles can not clean the arches under the nails. Otherwise, you risk ruining your nail.
Diamond nozzles
This type of nozzles can be divided into two types: sintered and precipitated. Their scope is also different. Sintered can not be used when processing skin and gel, but they are very good when working with acrylic. It must be cleaned on time.
Precipitated nozzles have proven themselves very well when working with gel, acrylic and nail treatment. However, when working with the skin, they did not show themselves very well due to the lack of sharpness.
Metal cutters
The technology of hardware manicure step by step involves the use of metal mills. They are made, as a rule, of carbide material. Their distinctive feature is that this nozzle can rotate in only one direction. They are used to remove rough and keratinized skin, as well as to reduce the thickness of the acrylic or gel coating. It is also allowed to clean them with corns and carry out preliminary processing of the nail surface.
Silicone polishers
The technique of performing hardware manicure step by step also involves the use of silicone polishers. They perfectly polish gel and acrylic, and also with their help you can give the skin a silkiness.
It will be very good to use this tool if you need to remove the gloss from the nail plate, and then carry out the extension procedure. Due to the softness of silicone, all procedures are painless.
Step-by-step hardware manicure
Hardware manicure for beginners step by step is not so difficult. The main thing before starting to have a good theoretical background and a little imagination. If you have purchased a machine and nozzles for hardware manicure, as well as all the necessary tools are available, you can begin to practice your knowledge.
The first step is to prepare your fingers. To do this, they are treated with a softening agent. This makes it possible to soften the cuticle and make its removal painless.
The second step is to treat the cuticle and skin around the fingers. You can use a diamond nozzle for this. The key point in this is that you should monitor your feelings during this procedure.
The third step is to give the nail any particular shape. A cylindrical or trapezoidal cutter can be used for this. It must be remembered that above the finger tufts there should be at least 2 mm of the nail.
The fourth step will be polishing, which is the most difficult process for beginners. Do not bring the edge of the polisher close to the nail. The nozzle does not need to be held in one place for more than one second.
The last, fifth step will be the treatment of the hands with oil in order to remove the remnants of the nail. The oil should be well absorbed and its residues can be removed. After that, the nails can be painted.
Devices and tools for hardware manicure
In general, a full-fledged device for performing hardware manicure should be multifunctional and have all the necessary accessories in its kit. The kit includes the machine itself and many different nozzles. The principle of its work is the same as that of a dentist's drill.
It will be best if your device is equipped with a built-in mini-vacuum cleaner. This will make it possible to avoid inhalation of dust generated during the processing of nails.
In addition to tools, you will also need oil and an emollient for rough skin of the hands. If necessary, you can use hand cream.
At the request of the client after the procedure of hardware manicure, you can use additional funds for the care of hands and nails. Some time after the manicure, you can correct it with a regular nail file.
Advantages and disadvantages of hardware manicure
The technology for performing hardware manicure step by step has a number of its features, which can represent both its advantages and disadvantages. Firstly, this type of treatment has shown itself to be the most sparing. It is also very safe and protects you from small cuts and cracks, which are almost inevitable with ordinary manicure.
A hardware manicure is able to step by step slow down the growth of skin treated in this way, and this will extend the term for re-conducting these activities. This type of manicure is very suitable for use on dry or uneven nails.
Hardware manicure also has negative aspects step by step. First of all, this is the appearance of a burning sensation after nozzles. Due to inexperience, there is a risk of damage to the nail plate itself and the appearance of strips on it.
Hardware manicure will not work if the nails are initially in very poor condition. Also, the quality of manicure and the achievement of the desired result directly depends on the number of nozzles available. In this case, you will have to purchase the whole set of tools at once.
Some tips for performing a hardware manicure
It is not recommended to do hardware manicures step by step for people with thin or soft and supple skin. Also, the use of this procedure is not desirable if the cuticle grows very much on the nail.
Now the technology of hardware manicure is widespread not only in beauty salons or manicure salons. Its implementation is quite possible even at home, having the most minimal set for nail care and manicure. However, you should not abuse this achievement and carry out the procedure very often, because in addition to the benefit, it can also have a negative effect on your nails, which will significantly spoil their appearance.
Those who are not confident in their abilities or have negative experience in performing manicure at home, as well as girls who have to go to a responsible event, it is better to resort to the help of professionals and take advantage of their useful tips.