Today Tricolor TV satellite digital television has become very popular. To save on the total cost of Tricolor TV, the setup and installation can be performed independently.
In order to start installing, assembling and tuning this antenna, you need to have at hand: wrench, drill, pencil, Phillips screwdriver, compass and protractor. First, screw the support onto the transponder bracket. Pull the cable from the antenna into the house and connect it to the LNB IN jack. Then, according to the instructions, prepare the antenna cable. Connect the satellite receiver and cable to the TV.
Now proceed to orient the antenna by pointing the plate at the satellite. As soon as you turn on the receiver, it will be in setup mode. In Tricolor TV, the setting starts from the moment when two bars appear at the bottom of the screen. In satellite TV Tricolor TV, the channel setting will depend on the quality and strength of the signals.
Now you should focus on the azimuth and calculated angles, which are indicated in the instructions and apply to your city, they are available in the table. You can orient the satellite and tilt the dishes on the
satellite dish of a neighbor. Using a compass, you should measure the azimuth or remember the degree of direction of your
satellite dish in this azimuth.
The correct Tricolor TV setting will give a green strip in the receiver. If this strip is not there, then put on the TV an assistant who will adjust your actions, or install a mirror in which you can watch by adjusting the antenna. It is enough if the signal is within 70%.
The exact Tricolor TV setup will begin as soon as the receiver is turned on. At this point, you will be prompted to download the update of the Tricolor TV channel list. After that, you need to register your receiver by entering your passport details, home address, receiver serial number and secret code from the card.
It is better to do it on a special site Tricolor TV. Write all data without abbreviations. As soon as registration passes, you will be informed about the contract number, and you can activate the card.
Now let's take a closer look at how channel settings are implemented in Tricolor TV.
As soon as you enter the “Menu”, select the “Channel Search” button. On the warning screen, select "Yes" and click "OK." At this point, the process of finding the right programs will start, and you will need to save them. Click Yes and OK again. After that, the setup of the programs that are included in the satellite TV package will begin.
Now proceed to the next step, as a result of which additional channels will be tuned into Tricolor TV instantly. To do this, select "Settings" in the menu and click "OK." Immediately a window appears in which you need to enter your secret password: "0000" - press this button 0 four times. Then select “Manual Search” and click “OK.” In the “Frequency” item, position the cursor and activate the value “12111”, press “OK”. Start by clicking on "Start Search", confirm with the "OK" button.
New generation receivers should have more than 100 channels.