At least sometimes we all faced the problem of the lack of hot water in the house, whether it was checking the water supply networks in the summer, an accident at any time of the year, or even living in a house where there is no hot water as such. In the latter case, a gas water heater is usually installed , which is cheaper than an electric one, but at the same time it perfectly heats the water. In other cases, people prefer not to get involved with explosive gas, but buy an electric version that heats the water, and is safer by itself. One of the many models on the market is the AEG instantaneous water heater (Allgemeine Elektricitäts Gesellschaft).
Specifications
- AEG water heater - flowing.
- The method of heating water is electric.
- The method of water supply is pressure or non-pressure (depending on model).
- Inlet pressure - 0.18-10 atm.
- Rated power - 7.5 kW.
- The required mains voltage is 220 V.
- It is installed vertically, a flexible eyeliner for the inflow and drainage of water is attached from below.
- The heater is mounted on the wall.
- Dimensions (W x H x D) - 20 x 36 x 10.6 cm.
- Weight - 2 kg.
Principle of operation
AEG instantaneous water heater with RMC 75 control system is designed to heat cold water to the required temperature for household needs (for one or more points of drawdown). The required water temperature is set using a mixer or a regulator on the front panel.
The design of the device is based on a heater (tubular electric heater), which is made from copper. It is located inside a high-strength metal flask. These heaters are not affected by the hardness of the water, so they can be used anywhere where there is a water supply. A special coating inside the bulb and on the surface of the heater protects against scale. It is the temperature of the heating element that is controlled by the water heater system, and when it overheats, the device turns off automatically.
AEG instantaneous water heaters and the like do not accumulate water and then heat it, but heat it in real time in the required volume to a predetermined temperature. It should be noted that thanks to such a system of operation, less energy is consumed.
It is important to remember that different models of water heaters are designed to operate in different types of mains voltage (single, two, or three phase).
The AEG flow-through water heater turns on and works at a constant pressure of water; water is supplied to the water heater constantly, regardless of whether the device is turned on. Non-pressure is weaker in power and, unlike pressure, can only work on one crane in the house. At the water inlet to the device, a tap is installed to control the high pressure of the water in the pipes, while the water flows out freely.
Security
German quality and compliance with European safety standards guarantee good and safe operation. In order for the AEG non-pressurized or pressurized instantaneous water heater to work for a long time and without problems, it has built-in protection against overheating in the form of a temperature limit, which ensures the safe operation of the electric device. There is also protection against getting water of type AP-25 on the wires and inside the appliance, thanks to which the water heater can be installed directly near the mixer and the place of showering.
It can be used both in a private house / apartment, and in commercial real estate, and some models can be used at public catering enterprises, where the water practically does not turn off during the working day.
Advantages of an AEG Water Heater
- Compact size (takes up a small space, unlike large 30-liter water heaters, but it heats water well).
- Profitability (does not "eat up" money, because when the heater is on, a relatively small amount of electricity is spent).
- High performance (able to work without interruption for several hours).
- It can provide several points with hot water (you can connect an eyeliner to both the faucet in the bathroom and the kitchen, but not all models have this option).
- The multi-level protection of the device described above.
- Automatic switching on and off when overheating, while cold water does not start to abruptly flow.
- The ability to adjust power (the more expensive the model, the greater the ability to adjust the pressure, water temperature).
- Easy to install due to its small size and weight, as well as a complete set and installation instructions.
- Affordable price for most models.
- The warranty from the manufacturer in all stores is 3 years, for some types - up to 10 years.
Options and appearance
Complete with a water heater upon purchase, you get standard fittings, a water-saving shower head with mounting brackets, as well as operating instructions and wires for connecting to the network. In the store you can pick up additional accessories in the form of nozzles for the shower, hoses, mounts, etc.
The color palette of water heaters is limited to black and white. The pen is usually highlighted with a red stripe.
approximate cost
Instantaneous electric water heater AEG costs from 7 to 80 thousand rubles. The cost depends on the transmission capacity (number of liters per minute), on the possibility of control (buttons, touch panel, remote control), on the appearance and other characteristics. Instantaneous water heater AEG RMC - one of the most popular and medium-priced models, costs about 15 thousand rubles.