In women's and men's forums, you can often see topics on how to make a pump for a member with your own hands. What is this device? What is it for? What is required for its preparation? Let's dwell on these issues.
Indications for use
The pump (or vacuum pump) is a modern device of a cylindrical shape, designed to improve the quality of sexual life.
In total there are several indications for its use:
- The need to increase the volume or length of the penis.
- Partial or complete lack of erection.
- An insufficient degree of elasticity of the penis during intercourse.
- Impotence.
The principle of operation is that the device creates high pressure in the inguinal region of a man. This leads to increased blood flow, stretching of the cavernous bodies and, consequently, to an increase in the penis. Finished equipment can be bought at a price of 3000-5000 rubles. It is much more profitable to create a vacuum pump for a member with your own hands.
Preparing to create. Flask
To prepare a manual pump to increase the penis with your own hands, you will need three main blanks.
A flask is a device in which the penis will be placed during the "training". It is recommended that you purchase a cylindrical beaker at a pharmacy or medical store. If there is no opportunity to buy it, then you can use improvised analogues:
- The external component of the large syringe, freed from the needle and the inner rod.
- Empty bottle. It requires a hole for a member on one side and a small incision for the tube from the opposite edge.
- Many men believe that you can use a spray can of the right size. But doing this is not recommended due to the environmental factor.
When creating a bulb, you need to remember that its size must correspond to the length and volume of the penis. Otherwise, the man will experience discomfort. Before manufacturing, it is required to check the integrity of the structure; there should be no cracks or other damage on it that could lead to personal injury. There should not be any angles or roughness on the surface of the flask. It is worth remembering about ensuring tightness, without which the desired effect will not be achieved.
Create a seal
An important detail when creating a do-it-yourself pump for enlarging a penis is the gasket. It is necessary so that a vacuum is created in the flask.
As a sealant, you can use a regular clamp, which will later be fitted to the pump. If the house has an old idle vacuum cleaner, then you can use an electric pump from it.
Important. The sealant, like the flask, must match the width of the penis. First you need to measure it with a centimeter. If you make it small, then during the exercise the discomfort will occur, if large, then a vacuum will not be created, respectively, the desired effect will not be achieved.
Pen creation
The last component needed to create a do-it-yourself vacuum pump to enlarge a penis is a pen. Ideally, the hose should be disconnected from the old tonometer. With the help of a pear, you can easily pump out excess air from the bulb.
It is worth noting that a similar device for creating a vacuum in a closed container is sold separately in some medical stores. It is ideal for the realization of what was intended.
It will be more difficult to use a hose that is worn on the base of a bottle or syringe. The air will need to be pumped out by mouth, syringe or a small pump, which will be worth a lot of effort.
Preparation for work
The penis is the most tender part of a man’s body, consisting of many soft tissues. Damaging it is quite difficult. Therefore, before you begin to understand how to make a pump for a member with your own hands, you need to do the preparation of each part for assembly.
First of all, it is required to study the surface of the seal and the bulb. There should be absolutely no sharp corners, cracks and rough surfaces on it. Any, even the smallest irregularity can cause irreparable harm to health.
The second important point is the right choice of material. It is important that it does not cause an allergic reaction on the skin. Otherwise, instead of the elasticity of the penis, the man will get irritation and itching.
The third detail is the mandatory processing of the basic mechanisms. Rinse the seal and flask with a sterile solution or soapy water. Then they need to be dried and additionally treated with alcohol.
Providing all components with sterility and safety, you can proceed to the main stage - the assembly of the device.
Assembly process
So, all the details are prepared for work, now you can move on to the main question, which is how to assemble a pump for a member with your own hands. This procedure consists of several basic steps:
- You should pick up a clean flask and make a small hole in the upper part, put a tube in it that will play the role of a valve. It is necessary that it tightly covers the hole and does not pass air through it.
- A clamp must be attached to the base of the flask. In size, it should correspond to the base of the genital organ. Additionally, you can sheathe it with a soft cloth for more convenient use. It is required to use a sealant as a connecting element for connecting parts. It is recommended to apply it in a thin layer.
A self-made pump for a member is ready. But do not rush to try it out in action. It is necessary to allow the product to dry completely for 2-3 days, only after that you can proceed to the correction of male dignity.
Important points
The size of manhood matters when building relationships. That is why representatives of a strong half of humanity often decide to create a pump with their own hands to increase the length of the penis. Many “masters” make mistakes at the manufacturing stage. It is worth talking about some important points.
Many men were injured due to the wrong size of the seal. When a vacuum was created by the device, the base of the penis was damaged or the testicles were sucked into the flask. It is very important to measure the width of the penis and make the ring out of the seal 0.5 cm larger.
Difficulties arose when using a bottle as a flask. A plastic container squeezed the head during an erection, and a glass one was damaged when the pressure in it increased. It is more efficient and reliable to create a pump for a member from a finished flask or syringe with your own hands.
In some cases, the device did not work at all. Vacuum may not form in two cases:
- The use of a narrow hose, which begins to squeeze during the pumping of air and stops passing it. The recommended diameter is 2-3 mm.
- Poor hose clamp in hole. It is definitely worth using sealant.
If all the rules are followed, it will turn out to create a wonderful device for penis correction, which will please the man for a long time.
Benefits
Absolutely the same thing is created with your own hands, a pump for a member in width and length, since the principle of its work is to increase blood flow and stretch the cavernous bodies. Why is it worth it to do it yourself, and not buy it in a store?
Of course, only in order to save. If the finished product costs more than 3,000 rubles, then you can create a device with the same working method absolutely free of charge at your fingertips or spend a small amount on the main components - up to 500 rubles.
disadvantages
The disadvantages of creating a homemade device more than the advantages. First of all, they are associated with the complexity of the process. Not every person will be able to create a safe device that allows you to achieve the desired effect, which would meet sanitary and hygienic requirements and be suitable in size.
The second minus is the aesthetic appearance. The finished device looks much more attractive.
And, of course, the principle of work is a little more complicated. In a sex shop, you can purchase a mechanism with automatic control. Just press the button and you can enjoy the process. At home, you can only create a hand-held device.
Terms of use
Separately, it is worth touching on the issue associated with the use of a corrective pump for a member:
- Previously, the penis needs to be treated with lubricant.
- Carefully requires you to enter it into the flask through the seal.
- All air should be pumped out of the tank with a pear.
- The hose must be secured with a clothespin to create a fixation.
- The member should be in the flask for 30-40 minutes.
Important: contraindications are any diseases of the reproductive system. If during operation of the device there was discomfort, then you should detach the clothespin from the hose and carefully remove the flask.
Nature has not awarded a large penis? Over time, he did not become as elastic as in his youth? Did an erection disappear, or did the first “bells” of impotence appear? If there are such problems, then you should think about how to create a pump for a member with your own hands. A simple device will allow a man to always stay in shape and delight women without cost.