Almost every modern house has a gas stove, which serves for cooking. But it must be used correctly, because if the safety rules are not followed, a life threat can arise. Sometimes the equipment needs to be put in another place. Is it possible to transfer gas pipes in the kitchen? This can be done, only the work must be entrusted to specialists.
When pipe replacement is required
Moving a gas pipe in the kitchen is considered a responsible procedure on which safety depends. Therefore, it should be borne in mind that skills and preparation are required to complete the work. Although hiring specialists will cost a considerable amount, it is still better to invest in security. Otherwise, the consequences may be different.
Typically, the transfer of a gas pipe in the kitchen is carried out during major repairs. But this work may be required in the presence of technical equipment deficiencies. According to the rules, the gas supply system must be reconstructed after 20 years of operation. No matter what the gas procedure is, safety rules must be followed.
Transfer Instructions
If you need to move equipment, you need to know how to transfer a gas pipe in the kitchen. Norms on how to transfer the system are determined by the master. But in any case, the wishes of the owner are taken into account. Often the procedure is required due to the inconvenient location of the gas system. The transfer of a gas pipe in the kitchen is carried out by a specialist using the following rules:
- the apartment has a special gas supply valve that closes before performing work;
- the gas pipeline is purged to remove gas residues from it;
- in the connection with the gas pipeline, it is necessary to cut off the interfering pipe, and the created hole is welded;
- a hole is created in the wall and the gas pipe is fixed.
Please note that the gas wiring must have an opening for a flexible bellows hose, with which the gas equipment is connected. Its length can be no more than 2 meters.
Actions when you need to transfer
In apartments, gas pipes are usually located in the kitchen. All people use the gas pipeline and the devices connected to it every day. But when the pipe interferes, carry out the transfer.
Before moving the gas pipe to the kitchen, you must:
- make a statement to the gas service, where you must specify the reasons for the transfer of the pipe;
- the area where the pipe will be installed should be examined by a specialist;
- assessment of the conditions of work;
- the specialist decides on the possibility of pipe transfer.
In some cases, if the owner does not like the divorce of the system, a new technical plan of the room is drawn up. This takes into account the location of the equipment.
Requirements for Specialists
Before performing work, you must make sure that the specialists have the appropriate qualifications. Therefore, it is so important to look at the certificates, the time of certification and confirmation of skills.
When the transfer of the gas pipe in the kitchen is completed, the landlord is given an act of work. It changes the gas system.
Generally accepted rules
No matter where the gas pipeline is installed, on the wall, floor, anyway, the distance from it to structures of a building nature should provide the possibility of inspection, control and installation. The system in the kitchen cannot cross ventilation grilles, window openings.
The distance between the pipe and the wire broadcasting means is established on the basis of safety rules. In residential premises, the height of installation of the equipment and its wiring will be at least 2.2 meters from the floor to the bottom of the pipe. If she has a heater, then the distance to the bottom of the heater is taken into account.
The gas pipeline is secured using:
- brackets;
- hooks;
- clamps;
- pendants.
These tools are also used when it is necessary to fix the pipe to floors or columns. With them, the gas pipe in the kitchen will be installed correctly. Standards and installation rules that establish the distance between fasteners are spelled out in special documents.
Security
Typically, the gas pipeline system in an apartment is approved by the floor plan documents. Options for the transfer and decor of a gas pipe in the kitchen can be offered by the master, and the owner will choose the most suitable type of work. Usually they are fixed on the walls. But if you use any changes, move or cut the pipe, then you should take into account safety standards.
During repairs, when work is done with the system wiring, there is a chance of an accident. Therefore, if the transfer of the pipe is associated only with improving the appearance of the room, then this idea is better not to implement. It can be used for technical problems.
If it was decided to make changes to the gas supply system, then work should be carried out at a time when there are not many people in the room. If the activity is carried out by specialized companies, the owner of the premises can get acquainted with certificates confirming the skill of employees. In this case, work is safe.
All activities related to trimming, transporting, fastening pipes should be carried out with the provision of an act of work done. And only then can you be sure that nothing threatens yourself and your loved ones.
General norms
To make the kitchen a safe place, you must familiarize yourself with generally accepted rules. They allow you to competently operate the gas system. If everything is suitably equipped, the room is safe.
Plates are installed in rooms with a height of 2.2 meters and above. When the ceiling is sloping, then for the equipment you need to choose the section of the kitchen that meets the norm. The room should have a window with a window, which will allow for repair work without the use of artificial lighting. At the same time it will turn out to air the kitchen. Having ventilation will be a great advantage.
Between the slab and the opposite wall should be from 1 meter. If the ceilings and walls are made of materials that are prone to burning, then they must be treated with plaster. Stoves can be used in kitchens, separated from the corridor by a wall or door.
Pipe wiring should be performed in such a way that between the wall and the plate there is more than 7 cm. There may be a branch to the plate, but only at the level of the connecting fitting. The disconnecting device is mounted above 1.5 meters from the floor, and 20 cm from the side of the plate. A special flexible sleeve is used in the installation of the equipment. It must be changed, given the advice in the equipment passport.
Cost of services
No matter how much the service costs, only a professional must carry out the transfer of a gas pipe in the kitchen. The price of services may be different, it all depends on the company, the complexity of the work. In any case, this should not be economized.
Cutting gas pipes costs between 2500–3500 rubles. The transfer work has a price within 6500 rubles. Also, a fee may be charged for each additional meter - from about 1,500 rubles.
Masking pipes
You can hide communications if the gas pipe was transferred. The rules and requirements must be followed. It is easier to hide the system when repairing, replacing furniture. There are several proven methods for this. The simplest is the method of sheltering furniture. Thanks to the pencil cases, you can hide the riser in the kitchen. Communications will not be visible, and besides, they will be provided with free access.
Another successful solution is to install a decorative pipe box. Such a design is inexpensive compared to buying furniture. This method is perfect for those people who can craft such gizmos. For the manufacture of boxes used wooden blocks and a metal profile. Decorative panels are fixed on it.
If the room does not allow the installation of bulky structures to hide communications, you can apply decor to the pipes. This will perfectly decorate them so that the kitchen is always cozy. You can use bright magnets. Looks beautiful with unusual patterns.
The usual painting of pipes is suitable so that they are combined with the design of the room. Heat resistant paint is perfect. A common method of sheltering pipes is to use drywall. Only any method should ensure the safety of the room.