Recently, Cersanit products have become more and more popular. Bathtubs from this manufacturer are made from English acrylic brand Lucite, which is characterized by high strength and unsurpassed whiteness. The described plumbing is a durable and practical solution. This is also due to the fact that the bath has special plates that are necessary for stiffness, as well as a double bottom. Thanks to these characteristics, the plumbing during operation is not deformed and does not bend. Special resins are introduced into the bottom, which make the structure as durable as possible. Today Cersanit products are presented in a large assortment. Bathtubs are no exception. They can have different sizes and shapes, so that the consumer can choose a design that fits perfectly into the room. The style of the plumbing fixtures described provides for wide sides, and in some models there are seats and comfortable armrests. The modern Cersanit brand combines comfort and elegance.
Positive feedback
If you choose a Cersanit acrylic bathtub, then, according to users, you will get a product that will be distinguished by bold design solutions and combine comfort and convenience. As practice shows, the surface does not darken over time, acrylic inhibits the development of bacteria. For this reason, consumers find these bathtubs more environmentally friendly than cast iron or steel. The acrylic bathtub Cersanit is lightweight, so users quite often choose it when there is a need to install in apartments on high floors of a multi-storey building. It is easy to deliver to the place, as well as install. The water in the bath will cool slowly, as the design has high heat-saving qualities.
Mistresses note that it is very simple to take care of the surface, for this it will only be necessary to rinse it with water, and then wipe it with a soft sponge, on which you should first apply a liquid detergent. During operation, abrasive substances that may damage the surface should be discarded. If scratches do occur, they will be easy to polish. Due to its characteristics, acrylic allows you to create interesting forms of bathtubs, so the manufacturer offers a large number of very different models. Many consumers, after acquiring plastic bathtubs, believe that acrylics will be just as soft and brittle. However, it is not. Cersanit brand acrylic products are equipped with a special frame that provides strength and stability to the structure. These bathtubs are environmentally friendly, you can verify this by requiring a quality certificate from the seller.
According to users, these products are hypoallergenic, as confirmed by Polish specialists. After reviewing the assortment, in the line you can find bathtubs with an antibacterial coating. If you are an interested consumer in the health of your loved ones, you should purchase a model that belongs to the Pure series, it has a special coating enriched with silver ions. Such protection has antibacterial and antifungal properties. This addition made it possible to achieve long-term and effective antimicrobial protection for the bathroom.
Negative reviews
If you are interested in the Cersanit brand, you should study the baths of this manufacturer in more detail, as they have not only positive, but also negative characteristics. This can be confirmed by customer reviews. From them you can find out that among the minuses is a rather high cost. This is true when compared with the prices of steel and cast iron bathtubs. In addition, despite the strength of the material, the surface of the bath is easily damaged by a solid object. This is often encountered by consumers. However, from their words it becomes clear that such damage can be eliminated even on their own. In some cases, the walls of such bathtubs begin to deform during operation. That is why buyers are advised to purchase products with a special frame.
Bath installation
If you choose one of the Cersanit brand products, bathtubs, for example, you can install the plumbing fixture yourself, as it has light weight. The design should be turned upside down and laid on a cardboard packaging, assemble the frame, following the instructions. Next, you need to install it on the bath. The product is installed on the legs near the installation site, and after the master should adjust them in height. If you want to install a decorative panel, the distance from the lower side to the floor should be approximately 600 mm. The bath should be installed in the intended place and check how horizontal the sides are relative to the surface. In this case, use the construction level. Installation of Cersanit acrylic bathtubs , like any other, involves the installation of a siphon, as well as overflow. The system is connected to the sewer, after which it is necessary to check the tightness of the joints by filling the bathtub with water. After installing the decorative panel, fill in the gaps between the sides and walls with antibacterial silicone sealant.
Specialist advice
In order for the bathtub to be firmly fixed in the desired position, it should be fixed to the wall. These works can be done using the mounting kit, which is included in the kit. It should have brackets for attaching to the wall, screws, studs, corner stops, as well as dowels.
Features of fixing the bath to the wall
Quite often, consumers have recently chosen Cersanit products. The bath, which you can install yourself, must be attached to the wall. In this case, it should be adjusted in height and horizontal, setting it to its final place and attaching brackets to the wall surface. This must be done in those places where they are supposed to be installed. After a pencil it should be noted the place where it is supposed to drill holes for dowels. At the next stage, you need to make holes by fixing the corner stops parallel to the board. This must be done in such a way that the lower edge of the side is at the set corners.
Methodology
The Cersanit baths you reviewed above should be mounted to the wall. For this, the holes must be drilled in the places where the mounting studs will be located. In this case, you should be guided by the marks made earlier. In the holes you need to install dowels and wind the mounting studs. The bath should be moved to the installation site, the mounting brackets must be put on the studs, and then tighten the nuts.
Reviews about the features of operation
Cersanit acrylic bathtubs, reviews of which will be useful to read before purchasing the product, usually cause problems during operation. This opinion is shared by many consumers who already use similar products. And if you choose a compact angular model, then it will not take up much space even in the smallest bathroom. Those users who have not spared money and purchased this product, note that its cost pays for itself within several years, while cast iron and steel baths may require restoration in a short time, which will have to be additionally spent.
Conclusion
Before installing the Cersanit bath , you should take care of the availability of all components and tools, otherwise you will have to visit the store more than once, which will extend the time of work. It is also worth remembering that such products are more difficult to install than, say, steel ones, since the latter can simply be placed in the right place, installed on the legs.