A bathroom and a bathroom are the smallest premises in apartments. Washing them to a state of gloss and constantly maintaining freshness is not an easy task. Dirt, emerging rust, limescale, yellow stains - all this haunts millions of housewives. Hundreds of funds are offered on store shelves, but only a few are really effective. Sometimes only folk recipes save the situation. In the article we will consider how to clean the bath.
About the nature of pollution
A variety of plaques are formed in the process of washing the body. They are composed of skin particles and skin secretions. To remove plaque, it is washed off with hot or warm water immediately after bathing. A sponge is recommended.
The use of soap, gels, and shampoos causes soap to form. He eats into the enamel or coating of the bathroom and after some time becomes difficult to remove, and then you will have to think about how to clean the bath.
If the water is too hard, then this becomes the reason that the plumbing changes its color. For cleaning, it is recommended to use such products that contain acid. Because of the water, rust also forms - usually such water contains a lot of iron.
If the bath is already many years old, then there is a possibility that some stains cannot be cleaned even by the most powerful means. Cracks are formed on the old coating that are invisible to the naked eye. They eat dirt and plaque, and then get rid of it is not easy.
If yellowness appeared on the enamel, this is due to the presence of old water pipes. Because of them, oxides appear. There are other, more specific contaminants - this is paint from repairs or mold. Various solvents and anti-fungal agents will help combat these types of contaminants.
Cast iron bath products
Cast iron bathtubs still do not lose their popularity due to special characteristics. But such products have serious problems. The use of zirconium salts in the process of applying enamel over time leads to the development of corrosion processes. The bath quickly dims and loses its attractive appearance.
Despite the fact that cast iron is almost an eternal material, the inner surfaces of the bathtub are covered with delicate enamels. This means that the first cleaning agent that comes across cannot be used. It is not recommended to use compositions containing abrasives or concentrated acids. Also, compounds with oxygen content are not suitable for cast iron - these are Sanitary 2 and Silit.
With rust and plaque these funds do an excellent job, however, the top layer of the decorative coating is deeply damaged. The compositions contain concentrated hydrochloric acid. Using Silita will eventually lead to a rough and dull bath surface.
Cif - ideal for a cast-iron bathtub
Among the compositions recommended for cast-iron baths there is a good choice. So, in the store you can buy a universal product in the form of sprays or creams Cif. It is great not only for processing cast-iron bathtubs, but also for washing sinks, toilets, and tiles. To use the composition, you need to apply a small amount of the drug on the walls of the bath and on the bottom. After about 5 minutes, the product is washed off with water.
Sannox
If the housewives do not know how to clean the bath, then you can buy "Sannox." The tool quickly and effectively defeats all types of plaque, removes rust. Also, the product is able to deal with deposits of various nature - organic or fatty, fresh or old. In addition, manufacturers claim that Sannox is able to defeat E. coli, staphylococci and unpleasant odors.
Comet - gel or spray
This product can quite effectively remove dirt and plaque from the surface of cast-iron bathtubs. The composition also forms a protective film on the surface that repels dirt.
"Phenolux"
This gel preparation also effectively removes traces of rust, soap scatters. The composition begins to work immediately after it has been applied. No need to wait long for the action to begin.
Folk tips for cast-iron bathtubs
It is not always possible to purchase some unique cleansing compound. If none of these preparations for cast iron was in the store, then the housewives know how to clean the bath at home with what is at hand.
Acetic essence fights excellently with old mud. It is necessary to fill the bowl with warm, but not hot water, and then dissolve 200 ml of essence in it. After about three hours, the water can be drained. In this case, there will be no harm from the use of this composition. As for cleaning, the essence is capable of much.
But not everyone has it. But every housewife has toilet soap and soda. Need to mix toilet soap and soda. This tool will clean plaque and dirt. With very serious contaminants, a little ammonia is added to the soda. Apply the mixture to the bath should be a nylon brush.
To whiten the bowl of the bath, you can use powder bleach. It is bred with water to the consistency of store sour cream. Then the composition is applied to the surface and left to dry. Then you need to wash everything off.
We clean acrylic baths correctly
To care for acrylic baths, manufacturers do not recommend compounds containing chlorine, gasoline and alkalis. Also, ammonia, acetone, acids are not suitable. It is not recommended to use abrasives, a hard sponge or metal brushes. Let's see how to clean the bath at home with preparations from the store.
Bass for acrylic
For these products, it is better to use a liquid composition or a gel product. All other forms of acrylic cleanser will not work.
Acrylan
This is a special foam designed specifically for the care of acrylic bathtubs. She perfectly fights with rust, various types of mold, fungus, soap stains and old pollution. A protective film is created on the surface of the bath, which will not allow limescale to accumulate.
Tim Profi
How to clean the bath quickly and safely? Environmentally friendly and effective composition for combating plaque and dirt. After using this product, a shiny appearance will appear on the surface of the acrylic bath.
Vinegar and lemon juice
This is a popular method. This mixture is applied to a contaminated surface and then washed off with warm water. But it is not necessary to wash off immediately, but after a while - it is necessary for the composition to begin to act. To disinfect the bath, you can fill the bowl with a solution of 7% bleach. Then the bowl is thoroughly washed and polished.
We clean enameled baths on our own
With enamel baths, everything is much simpler than with acrylic ones. The same products that are used for cast iron products will do. But it’s much more effective to use popular advice - this way you can achieve cleanliness and not damage the enamel.
Here's how to clean the bathtub with soda to remove traces of rust: apply soda to damaged areas and rinse with water after 10 minutes. Also, rust from an enameled bath can be removed with vinegar and borax. The mixture is first diluted in a separate container, and then applied to a rag and rub the contaminated area. In addition, it is possible to effectively remove yellow spots with a mixture of salt and vinegar. But the mixture should be well heated. It is equally effective to remove rust spots with ordinary salt and turpentine.
Young housewives do not know how to clean the plaque in the bathroom. More experienced women solve this problem with the help of ammonia dissolved in water. You need to wash the bath with a rag dipped in this composition. You can remove plaque with lemon juice. Affected areas are also rubbed with soda and mustard. You need to mix in a ratio of 1: 3.
If the bowl of the bathroom has faded and lost its color, it will be possible to restore the shine with paper napkins. They are moistened in vinegar and rubbed into the bath. Next you need to wait a few hours. Then everything is washed thoroughly.
If you need to whiten the bath, then mix soda ash and baking soda in a ratio of 1: 1. The mixture will begin to act in 10 minutes. Then, 50 grams of vinegar mixed with 50 grams of bleach is applied on top of it. After about half an hour, everything needs to be washed off. Cleaning a bathtub with soda and vinegar is sometimes much more effective than using modern means.
How to clean the tiles in the bathroom with your own hands?
There are popular councils and to solve this problem. Sometimes a folk remedy copes with cleaning much better than a store.
45 grams of vinegar are dissolved in a liter of water. Then, using a spray gun, the composition is applied to the surface of the tile. After a few minutes, the mixture can be removed. Citric acid with water will also help to efficiently clean the tile - it also has a bactericidal effect.
Most organic matter can be removed with bleach. She perfectly cleanses and whitens. Even “Whiteness” will do. Before applying it, put part of the product on one seam and watch how the color changes.
How to clean tiles in the bathroom with soda? Dissolve soda in water until sour cream. But the composition should be exactly wet, otherwise the soda can easily scratch the tile. After cleaning, the tile is washed with warm water - this will help to avoid plaque.
The ammonia, dissolved in water, cleans both the tile itself and the tile joints. But its minus is the smell. In addition, you need to work with it carefully - in large quantities, it can be dangerous.
How to clean chrome taps?
Faucets and shower hoses require no less personal care than a bathtub. Rust and plaque also form on chromed surfaces - these are the enemies of all bathrooms. Defeat plaque and rust with table vinegar. Mistresses tell how to clean the bath with vinegar. It is evenly distributed over the surface. Then you need to wait about half an hour and wash off the vinegar. On this all work is completed.