Modern washing machines are complex devices that have a number of additional functions and modes designed to perform versatile tasks to facilitate the work of their owners. Moreover, this technique has a lot of protective systems that protect it from damage or irregularities in the technical process. With this in mind, even the most insignificant breakdown can cause the user difficulties in operation and usually leads to the call of the wizard, which is directly associated with additional costs. However, if the washing machine does not collect water, sometimes it is enough to perform certain actions or carry out independent repairs in order to save money and not to go to the service center for details.
Types of breakdowns and their elimination
To begin with, it’s worth mentioning right away that all the methods below are suitable for almost all models of such equipment. These are the simplest manipulations that can be performed independently without disassembling the unit and without a special education. When the washing machine does not draw water and everything described below did not help to fix the problem, you should contact a service center.
No water in the system
This reason is commonplace, but first of all it is worth checking it. The fact is that many housewives are sometimes so keen on household chores that they sometimes forget that this product needs to be fed from the water supply system. Therefore, if the washing machine does not draw water, then try to open the tap and make sure that you have it in your apartment. This behavior of the device is possible with a small pressure.
The crane is blocked
Very often, when connecting such devices to the water supply, a special faucet is installed, which blocks the access of fluid to the unit. Sometimes it is practically not used and its presence is simply forgotten. As a result of this, if you block it, you can not immediately guess the reason for this behavior of the device. Therefore, if the washing machine does not draw water, then it is worth checking this locking mechanism and, if necessary, transfer it to the open position.
Violation in process
Sometimes such a technique very often behaves strangely if a mistake was made in the program. When the washing machine draws and drains the water before the wash starts, then this may relate to this type of mismatch. What to do:
- First of all, pay attention to the presence of linen in the drum. Some models in its absence may either not collect liquid at all, or immediately drain it.
- Sometimes such a defect occurs already in the washing process itself, which is usually associated with the large weight of the laundry itself or its uneven distribution. Modern technology is equipped with just a huge number of sensors that monitor the entire process.
- Some models control the closing of the loading door and even the tray into which the powder is poured. Therefore, it is worth checking the density of their fit to the body.
Such violations in the process usually have their own error code and are often displayed on the device’s operating panel. Some manufacturers provide a breakdown of these signals in the instruction manual.
Door breakage
If the washing machine does not draw water, the reasons for this behavior are most often associated with a malfunction of the door. The fact is that a special sensor is installed on its lock, and if it does not work correctly or fails, then there will be no liquid supply. It is worth noting that replacing such a part is quite simple, and in some models it can be performed without disassembling the device. Very often, users simply remove the sensor itself, closing its contacts, but then the lock stops holding the door, which can lead to its spontaneous opening during spinning when the vibration increases.
Filter clogging
If you are wondering why the washing machine does not draw water, it is worth considering certain design features of the model. The fact is that at the entrance to the supply system of the device very often a small filter is installed in the form of a metal mesh. It must be cleaned periodically:
- First, disconnect the machine hose from the water supply. This may require a wrench, since the hose is connected through a special sleeve.
- At one of the ends of the connection pipe, such a filter is usually installed. It must be cleaned.
- In some cases, the metal mesh rusts and completely fails. In this case, it must be replaced.
- At the end of the work, the system should be assembled back by connecting the hose to the water supply.
Intake valve failure
If the Indesit washing machine does not draw water, then sometimes the cause is a malfunction of the special inlet valve, which is located at the entrance to the device. A similar defect is also characteristic of units from other manufacturers, since this element is common to all products of this type. It should be noted that its design is made in such a way that when it fails, it switches to the "locked" position to prevent flooding.
It is quite difficult to fix such a breakdown on your own. To do this, you will have to disassemble the device, disconnect this node from the water supply system and disconnect the controller contacts from it. After that, the valve is removed and replaced. The elimination of such a malfunction can be attributed to a minor repair, although its cost directly depends on the price of the necessary part.
Pump breakdown
Only a master can diagnose such a malfunction. However, if the tank itself is full, pumping is not carried out and water does not flow, then this is the first sign of such a malfunction. In this case, you should first check the filter of the device, because if it is clogged, then it is impossible to drain the liquid. If cleaning does not bring results, you need to contact a service center.
Replacing this unit can be quite expensive, so you should be very careful about the product during operation. Periodically clean the filter and install the drain hose at the level recommended by the manual.
Faulty programmer
Modern household appliances for this purpose are equipped with rather sophisticated electronics that control the entire process. Therefore, if it crashes or fails, then simply the washing machine does not pick up water. What to do in such cases is usually indicated in the instruction manual for a particular model. However, there are also the simplest actions that can be performed independently:
- First of all, a breakdown of this type is displayed on the device display. It may look like an error, an incorrect inscription or a complete lack of indication. This is exactly how this defect is determined.
- Next, you must disconnect the device from the power supply and leave it in this position for 10-15 minutes. After that, the inclusion.
- If after such actions the machine does not work, it is recommended to call the wizard. It is quite difficult to repair such a mechanism on your own, especially if there is no special tool, there is no corresponding formation and spare parts.
Problems in the pressure sensor
This unit is designed to control the flow of water into the machine. It is he who is responsible for the amount of liquid in accordance with the weight of the laundry. Therefore, if a breakdown occurs in it, then the water simply will not enter the device. Replacement of this part is carried out with the help of a service center, where it is almost always available.
It is better not to carry out such repairs yourself. The fact is that in some models it is necessary to make subsequent adjustments or adjustments, and for this you need to have the appropriate equipment.
Recommendations of specialists
- If the washing machine draws water and immediately drains it, then you should pay attention to the washing mode, which is set on the programmer. Quite often, housewives simply forget that they have chosen a certain way to complete the task, which involves such behavior. That is why experts recommend checking in the optimal mode.
- If the product is under warranty, then do not disassemble it yourself and replace certain components. Calling a qualified specialist will take some time, but will save a significant amount.
- At times, the operating instructions describe in detail the sequence of actions when a certain breakdown is detected. All instructions should be followed clearly and in the given order, since they are written for a specific model, taking into account its technical features and test tests.
- If the device hose is disconnected from the water supply system, it is necessary to shut off the fluid supply in this area or completely in the network.
- On some models, the operation of the intake valve is checked by connecting the machine to the network. If this unit is serviceable, a characteristic click should be heard caused by a temporary opening of the valve.
Conclusion
If the washing machine does not draw water, then the reasons for this behavior in this device may be many. That is why, before contacting specialists, it is necessary to completely exclude the influence of the human factor, so as not to spend money on repairs and not look stupid in front of the master, who discovered that you just turned off the inlet valve. At the same time, most breakdowns associated with such a malfunction can be eliminated independently without disassembling the machine.