Over time, bathtubs lose their attractive appearance. They can cause scratches, chips and other damage. Paint for acrylic bathtubs will help restore the surface. It is moisture resistant and durable, therefore it is one of the most sought after. After surface treatment, temperature differences are not terrible. Read more about the paint in the article.
Benefits of Liquid Acrylic
Acrylic paint for the bathroom will be much cheaper than replacing the product. If plumbing equipment has lost its radiance, it is not necessary to purchase new ones. Liquid acrylic will improve the appearance of the product. Such paint has the following advantages:
- The material reduces the cost of restoration.
- The painting procedure with preparation is carried out in 2-3 hours.
- It is not necessary to dismantle the bathroom, as well as remove the tiles, which must be done when installing inserts or replacing the product.
- After painting, the plumbing will serve for many years, while the surface does not flake and does not fade.
Is it possible to paint the bathtub with acrylic paint? This tool will be the best protection for the product. It is enough to carry out thorough preparation and processing. If everything is done correctly, the result is stored for a long time.
Training
Before painting the bathtub with acrylic paint, it is necessary to prepare the surface for processing:
- First remove the top layer of old enamel. To do this, use a household drill with a nozzle or grinder. Before this work, the coating is degreased with alcohol, preferably undiluted, and dirt is removed. It is necessary to use special glasses and a respirator to protect from enamel in the eyes and respiratory tract. If there is no power tool, sandpaper is suitable.
- After removing the enamel, the bath must be covered with a degreasing liquid. After completing this work, dry the product. Preparation is important because the quality of the result depends on it. If you do not eliminate all areas of the old enamel, the acrylic layer will not lie flat, which will negatively affect the service life.
- In order not to paint the tile located by the bath, it must be sealed with masking tape.
It is necessary to disconnect the drain holes of the bath from the sewer. The space under the drain is covered with a film.
How to prepare acrylic?
It is necessary to prepare the paint itself for acrylic bathtubs. To make the mixture a suitable consistency, a hardener is added to it. Then the composition must be shaken. The result is a homogeneous mixture without lumps and impurities. Do not use paint immediately, it must be left for half an hour.
Then the mixture should be used within 2-3 hours. Therefore, it is important to remember about quality and speed. You should look at the shelf life of the solution, since it is different for all manufacturers.
How to apply correctly?
Painting the bathtub with acrylic paint is performed according to the following instructions:
- It must be borne in mind that the sizes of sanitary products are different. Therefore, before work, you should pay attention to the packaging of liquid acrylic, which indicates the approximate volume for staining. A container should be placed under the drain, as excess acrylic will flow into it. It is advisable to pour paint in small portions into light dishes.
- If acrylic paint for a cast-iron bath will be used, processing should begin from the edges of the product. It will take a bulk method, which will cover the perimeter of the plumbing with a small stream of paint. The acrylic composition will drain along the inner walls, filling in cracks and bumps. It is important that the base is smooth and non-greasy.
- After painting, acrylic drains to the base of the bath. Then you should remove the cork from the drain and put a paint on the base with a spatula, taking out its excess in the drain. For such work, rubber tools should be used. A medium-sized spatula is suitable. It will be easy for them to process the rounded sections of the bath, and the pace of the process will be high.
Completion
The result will depend on patience, the ability to apply the composition in a uniform layer on the walls of plumbing. The material will be solid after half a day. During this time, small particles of dust should not fall on the product, otherwise a rough surface will result.
If dust got on the surface or bubbles formed, smudges, you need to repeat the procedure, apply another layer. But the difficulty lies in the fact that a repeated layer should not be applied to the resulting surface. We need to do the preparatory work again. If the surface has dried and there are no defects, it is possible to install drains and connections to the sewer.
Paint cost
How much does acrylic bath paint cost? The approximate price of the composition is 1700-2000 rubles. You need to buy paint from official representatives, as well as in construction and plumbing stores. The quality of the mixture affects the drying time and performance, so you should not save.
Before staining, measure the dimensions of the bath. If in doubt about the amount of paint, then a larger number of mixtures should be used. This is necessary to protect against marriage.
Paint selection
Quality paint for acrylic bathtubs should be:
- with high coating strength;
- elastic;
- resistant to moisture, dirt;
- without smell;
- with preservation of color;
- high degree of adhesion;
- resistant to temperature;
- resistant to sunlight.
When purchasing paint, you need to look at its composition and quality. Acrylic is not cheap. But overpaying, a person gets a lasting result. The best acrylic paint for the bathroom is produced by the following manufacturers:
- Tikkurila;
- Jobi;
- Feidal
- Worked
- Plaid;
- WDAK;
- Dulux.
When buying, you need to pay attention to the composition and quality. You should not purchase bulk acrylic paint for bathtubs in the open. It may be cheaper in cost, but its quality is probably low. It is better to contact a hardware store. It is preferable to choose products from well-known manufacturers.
According to reviews, acrylic paint for the bath allows you to qualitatively restore the surface. There are many colors of this product. The surface can be made not only plain, but also multicolored. Often thanks to the stencils, a highly artistic interior design is created.
Liquid acrylic is applied by pouring. If the method of use indicates that the composition is used with a spray, then this is not acrylic paint. After restoration, the bathroom will be warmer, since the material does not conduct heat. Therefore, the collected water will keep the temperature for a long time.
Acrylic paint for walls
Paint is used to update the walls of the bathroom. It can replace tiles, plastic panels. Acrylic paint is chosen due to its positive properties:
- The walls become flat, smooth, water-repellent.
- They can be washed.
- The coating will hide the minor imperfections of the walls.
- The result is preserved for a long time, the service life of the paint is much longer than with other coatings.
- For work, no special skills are needed.
- There will be no unpleasant odors in the air, as with other paints.
- The coating dries quickly.
- The room will have high antiseptic characteristics.
- Decorative properties are much better than other coatings.
- Economical consumption.
Paint on the wall as follows:
- The old coating is removed.
- It is necessary to remove dirt and dust. It is advisable to wash with water.
- It is important to get rid of large irregularities with acrylic putty.
- The primer is applied in 2 layers. The second - after the drying of the first.
- At the end, coloring is done.
Staining is carried out with a brush and a roller. Paint is applied in 2 layers. The first should be diluted with water by 10% of the volume, which will improve adhesion to the walls.
Epoxy paint
For the restoration of the bath, this paint is also used. If the work is done correctly, then the surface quality is maintained for 15-20 years. Epoxy paint is presented in the form of a suspension of epoxy resin, pigments, fillers.
The advantages of the composition include the following:
- The coating will be uniform, smooth, glossy.
- It can be used for metal and cast-iron bathtubs.
- The coating does not deteriorate from acids and alkalis.
- The two-component enamel paint is durable.
But epoxy has its drawbacks:
- Toxicity, so work with a gas mask or respirator.
- You can use a diluted composition with a hardener for several hours, so restoration should be done quickly.
- There are streaks with this material, so the consistency of the product should be thick.
- Enamel quickly turns yellow.
Epoxy paint is inexpensive. If you carefully perform the restoration, you get a high-quality result.
Spray paint
This paint is sold in spray cans, it dries quickly, has high adhesion. The aerosol is convenient, since before use you only need to shake the composition, and you do not need to mix the agent with the hardener. Of the advantages distinguish:
- The speed and ease of application without additional devices.
- Enamel dries faster.
- It turns out a smooth surface.
- Different colors are sold in spray cans.
- There are paint sprays that create a specific surface texture, effects: fluorescent, pearlescent.
- Can be used to upgrade steel and cast iron bathtubs.
Of the minuses, the following nuances are distinguished:
- You cannot mix colors to create a specific hue.
- The coating is short-lived because a lot of solvent is present in the aerosol.
- Incorrect application may cause streaks and smudges.
Repairing a bath involves the same steps as with other paints. It is necessary to perform surface preparation for high-quality processing.
Alkyd paint
This coloring agent is also used in the restoration of the bath. But some do not recommend using it, as it is more suitable for wood, concrete and metal. Alkyd paints have no pungent odor. The composition is almost no solvents. The pluses include:
- Good adhesion to materials.
- The coating does not fade.
- The service life with the correct application is approximately 5-7 years.
The disadvantages are as follows:
- The surface must be prepared and primed.
- Paint is applied with a brush, so there may be smudges and defects.
- The composition is applied in several layers, so the costs will be large.
If you want to do your own restoration of the bath, you should carefully consider the choice of paint. Acrylic composition is considered one of the best, as it allows you to get a lasting result. The updated surface remains for a long time.