How to wash tiles in the bathroom: the most effective means, tips

The bathroom is usually tiled. The advantages of this solution are obvious: attractive appearance, practicality, and most importantly - durability. But, despite the excellent performance of this material, the tile needs periodic maintenance - cleaning and processing.

Therefore, many housewives are wondering how to wash the tiles in the bathroom. After repair or installation of some equipment, this problem is especially relevant. The procedure for caring for tiles is complicated by the fact that today's market of cleaning, disinfecting and other specific products offers a huge assortment of chemicals for all occasions. And choosing the best option is quite difficult.

We will try to highlight this problem and answer the question of how to better wash the tiles in the bathroom, and to do this as painlessly as possible for the room itself and for households. We will analyze the main nuances of this procedure, possible problems and solutions.

Plaque

Consider how and how to wash tiles in the bathroom from plaque. In this case, it is better to select funds without aggressive acids and abrasive properties. They can spoil the appearance of the tiles and contribute to the abrasion of the grout.

In order to wash the tiles in the bathroom from plaque, a soap solution, vinegar (ammonia can be), a soft sponge and rubber gloves are enough. Some housewives quite successfully use old toothbrushes and microfiber wipes as improvised means.

How to quickly wash tiles in the bathroom from plaque:

1. Use a sponge and soapy solution to clean the tiles.
2. A sponge dipped in vinegar (or ammonia) thoroughly wipe the tile.
3. Clean with a clean cloth dry soap and other residues.

This procedure takes no more than half an hour. Thanks to such prevention, you can not only wash the tiles in the bathroom from the ubiquitous coating, but also give the room an attractive appearance, which will result in aesthetic pleasure.

Limescale

This problem arises due to the concentration of calcium and magnesium salts. The latter are present in large quantities in hard water. Due to limescale, the room loses its attractive appearance, and the tile becomes not so shiny and gradually fades. Moreover, every day the situation is aggravated if you do not conduct periodic cleaning.

We will figure out how to wash the tiles in the bathroom from limescale. Our stores have a lot of chemicals to deal with this problem, but in a number of simple cases you can deal with it using alternative methods.

Features of the procedure

To eliminate limescale, we need six percent vinegar and one and a half liter containers (preferably with a spray bottle). We pour the first into the last and prepare the tiles for cleaning. Before the procedure, it is best to wipe the tile with a slightly damp sponge and wait for it to dry completely. You will also need an old toothbrush and microfiber cloth. How to wash the tiles in the bathroom from a known raid, we learned, now we will figure out how to do it.

Cleaning procedure:

1. Spray the tiles from the spray bottle with vinegar and wait 5 minutes.
2. Using a toothbrush, eliminate softened deposits on tiles and joints.
3. Wipe the tiles dry with a microfiber cloth to get rid of stains.

Thanks to vinegar, the tile will not only become outwardly attractive, but unpleasant odors will also go away with limescale. This procedure should be carried out no more than once a week. Otherwise, not the most pleasant smell of vinegar will be added to the fragrance of local shampoos.

Soapy plaque

We will find out with what means to wash the tiles in the bathroom from soapy plaque. Such an education in itself is harmless, but many are annoyed by its appearance. Shampoos, balms and other hygiene products are mixed with water and, evaporating, settle on the walls of the room in the form of a thin film.

With each subsequent shower, the layers accumulate and form a soapy coating. The tile begins to fade and no trace remains of the former gloss. Regular cleaning of the tiles avoids such problems. If you do not carry out prevention, you will have to use strong chemistry.

Features of the procedure

We will consider how to wash the tiles in the bathroom. We will use improvised means. For this procedure, we need baking soda, ammonia, vinegar and a spray. If we talk about the average bathrooms, then a one and a half liter container will be quite enough.

The recipe for making the composition is simple: 7 tablespoons of soda, 4 tablespoons of vinegar and 5 ammonia. All this must be thoroughly mixed until the ingredients are completely dissolved.

Cleaning procedure:

1. Spray the tile in the bathroom and wait half an hour.
2. Clean the tiles from formation with warm water and a sponge.
3. Wipe the tiles dry with a microfiber cloth.

If you do not want to rack your brains every time over the question of how to wash the tiles in the bathroom from soapy deposits, then make it a rule to wipe it dry after each shower. In this case, there will be no formations.

Mold and fungus

In any room there are spores of fungus and mold, and the bath is the most attractive nursery for these elements. For the formation of a stably growing and visually noticeable colony of the fungus, increased humidity and heat are required. All this is in the bathroom.

Upon contact with a damp surface, mold begins to multiply and develop rapidly. The obvious fruits of this formation are small black or green spots on the tiles and tile joints. And if the previous problems were mostly decorative and spoiled the appearance of the bathroom, then the fungus is dangerous for the human body. It can be a catalyst for asthma, dermatosis and other allergic reactions.

Mold Prevention

Before washing the tiles in the bathroom from mold, it is necessary to carry out preliminary prevention. Otherwise, the fight against the fungus will not bring the desired effect. First of all, it is worth eliminating excessive humidity in the bathroom. Carefully inspect the room for water accumulation. The most common reason is a leak in the tap.

If there is no ventilation in the bathroom, it is almost impossible to get rid of mold. An open door to the room helps only in part. In addition, the constantly wide open bathroom in the apartment is not the most pleasant picture. And this does not add convenience, given the narrow corridors of modern layouts.

Many use the bathroom to dry things. If mold fungus grows in front of your eyes, then it is worth moving the clothesline to the balcony or kitchen. Wet things also contribute to increased humidity in the room, and in terms of saturation efficiency, they are not inferior to pouring water from the tap.

Mold removal

Next, consider how to eliminate mold and fungus folk remedies. If the formation is obvious and large, then it is worth removing it with a sharp tool. A construction knife is perfect in this case. For small mold, you will need hydrogen peroxide, vinegar, baking soda, one and a half liter containers and a spray bottle. The ingredients do not need to be mixed.

First you need to treat the surface with hydrogen peroxide from the atomizer. Particular attention must be paid to tile joints, where mold is particularly active. We leave the surface to dry, then with the help of a sponge we wash off the composition.

After that, pour the solution with vinegar (4 tablespoons) into the container and also process the tiles, not forgetting the seams. We wait ten minutes and wipe the tile with a sponge with a little warm water. Leave the tile to dry for five minutes.

We grow baking soda in a container (7 tablespoons) and process the surface. In parallel, we clean the seams with the hard side of the sponge or an old toothbrush. Immediately it is worth warning that it is impossible to wipe the mold from the tile itself with metal brushes or with some abrasive tools. Scratches or even chips may appear on the tile.

Effect fixing

To consolidate the effect, you will need a regular and non-aggressive detergent with a chlorine content, as well as ammonia. As improvised tools we use a sponge and a toothbrush. We put on the first chlorine-containing product and process the tile. Seams can be scrubbed with a toothbrush. After washing off the composition with tile warm liquid.

Dilute ammonia with water 1 to 1. Here it is best to use a spray bottle instead of a sponge. We process the surface and leave it to dry for ten minutes. Then thoroughly rinse with plenty of warm water and wipe it dry with microfiber cloths.

Chemistry for mold control

If the colonies of the fungus outgrew volumes of 10 centimeters, then folk methods and means they can no longer be removed. It is necessary to use aggressive chemistry. Similar antiseptics are sold in specialized construction stores.

The most effective means are:

• "Isocide."
• "Dali."
• "Antifungal."
• SikaGard.

Judging by consumer reviews, the above tools do an excellent job at eliminating mold and mildew. Yes, many users complain of smell, toxicity and other unpleasant moments, but they perform their task. In addition, there are plenty of tools to reduce negative effects: masks, gloves, sprays, etc.

This chemistry is quite “heavy”, so it’s not suitable for everyday use. Experts recommend resorting to her help no more than once a month. It will also be useful to familiarize yourself with the instructions on the tube in order to avoid the appearance of allergic reactions and other unpleasant nuances.

Universal chemicals

All tile care products in the bathroom come in the form of sprays and gels. Powdery consistency can damage the glossy surface of the tile. Nevertheless, in some difficult cases, the latter cannot be dispensed with.

Judging by user reviews, the most effective are the following tools:

• "Mister Muscle";
• "Sun Wedge";
• "Silite";
• Santik
• "Domestos";
• "Comets."

Reviews about them are mostly positive, consumers do not notice any significant shortcomings during the cleaning of tiles. Separately, it is worth noting that the above tools are used by professionals who are professionally engaged in cleaning the premises. They also leave flattering reviews for these detergents.

Do not forget that such chemistry adversely affects the tile grout. Acids corrode seams, so they need to be updated periodically. About once a year or less, if you used a high-quality and chemical-resistant grout.