There is an intercom system in almost every city house. This is a handy thing that also helps in terms of security. And everything would be fine, but you need to pay for the intercom. There is a category of people who overdue such payments and as a result remain without an intercom, since it is turned off for debts. But these people do not despair and just ask how to connect the intercom if they disconnected it for non-payment. Although this is not very correct. It will be more correct to do everything according to the law and pay debts.
Reasons for disconnecting
Do not always turn off the intercom for debts. Consider all the possible reasons when a trip occurs. There are several main reasons:
- Statement by the owner on the voluntary removal of the doorphone from the service.
- Some malfunctions of the technical part of the equipment, as well as mechanical damage to the signal line or simply power outages.
- Well, actually, a situation when the intercom handset was disconnected for non-payment. How to connect? We'll figure out.
If the intercom does not work due to a malfunction, then you should not engage in self-repair. Specially trained people are required to do this per day. If the damage is serious, then this period can be extended to three days.
Repair of intercoms in this case should be handled by a company that issues you payments for using intercom services. In case of malfunctions, you should contact this organization, this can help significantly reduce the time for repairing the intercom. As a rule, in your large and crowded entrance everyone will rely on a neighbor. And in the end, no one will notify the company that serves the intercom about a breakdown. This rule has already been proven by millions of apartment buildings. Do not check this rule on yourself, show your active citizenship and assert your rights.
How to connect an intercom if disconnected for non-payment?
When your intercom was turned off for debts, then this is obviously not from your apartment. This means that the cable in your apartment is suitable. If you yourself decided to do everything and independently connect a disconnected intercom, then you should know all the features and subtleties of setting parameters, as well as connecting your intercom handset to a common house line. Perhaps the easiest and fastest way to deal with everything in this case is to act strictly according to our instructions.
If disabled for non-payment: instruction
The control system for the entire intercom is usually installed on the very first floor of your entrance. To get to the setup system, you will need a key that will give access to the shield at your entrance. In addition, you need a screwdriver to open the intercom system.
Next, you can move on to resolving the issue of how to connect the intercom, if disconnected for non-payment. But all lies in the fact that in the device of each company this problem can be solved in different ways. It is for this reason that we consider the question on the example of intercoms of well-known manufacturers.
Vizit intercoms
So, the shield has already been opened, like the case, now the most difficult part begins. From the cover of your Vizit, all the screws are loosened on both sides (left and right). On the internal board you need to find the jumper WORK / PRG. Then two elements should be closed in position WORK.
After that, you need to enter the service mode, but entering this intercom mode is possible either using a secret code or using a master key. When you do not have a password and no key, you need to set the jumper from the WORK position (in which we installed it recently) to the PRG position, this will mean for the intercom that its programming has begun.
It is worth noting that the key with the inscription "220 Volts" does not have to be turned off, but it is extremely important in this case to be careful not to get an electric shock. After that, from the street you can make the necessary settings.
How to connect a disconnected intercom? To turn on the call to the apartment you need to go into the “Service settings” mode. To do this, you need to dial a combination of numbers # 999 on the intercom, after which two short clear sound signals should sound. Then press the “1” key, one more beep will be heard.
Do not rush to leave the service mode, press "8". After you hear a beep, enter your apartment number. After entering the apartment number, click on the "#", one more sound signal will sound. It is worth knowing that if the number of your apartment is three-digit, then "#" does not need to be pressed. The final stage of work is a set of keys “1” and keys “*”.
After such manipulations, the intercom in your apartment will work. The WORK / PRG jumper should be moved from the PRG position to the WORK position. The procedure is completed. You can assemble the housing and close the shield.
Now we have learned how to proceed if we disconnected the intercom for non-payment, how to reconnect the handset in the apartment ourselves. Now we will consider the moment when the keychain is registered, we will do it on the example of another manufacturer.
Intercoms by Cyfral
How to connect an intercom if disconnected for non-payment when Cyfral is installed in your staircase? To enter the doorphone menu, press any number or call button. Hold the key until a beep sounds. Of course, the code is unknown to you, so you need to remove the back cover of the intercom. Before you reset everything, the power is turned off on this intercom. After that, in the top two holes you need to bridge two contacts. Zeroing occurs.
After a new connection, a submenu will be entered. After that, press two keys at the same time - “1” and “C”. At this point, the system will completely reset to the factory default settings with a standard secret code. After that, you can screw the panel cover into place.
To now enter the submenu, the combination “1234” is typed in turn. Then, by clicking on the number “5”, you can change the code and register the key. After the characters appear on the screen, enter “000” and attach the key. You will hear a characteristic signal, this will mean that the system parameters have been saved. After changing the code, you need to exit, this is done by pressing the "C" key.
Intercoms by Eltis
Now about the company Eltis. How can I connect an intercom to a disconnected handset in an apartment? Everything is done in the same way as with the Cyfral intercom. Follow the necessary procedures, and your intercom will start working again, as before.
There are other companies that produce intercoms, but we examined the most popular ones. We will not focus on manufacturers who occupy a very small segment in the sales market of these devices in our country.
Reviews
Not only are you wondering what to do if you disconnected the intercom, how to connect it yourself. This is a popular issue. There are reviews of people who have done such manipulations before you.
As a rule, reviews say that if you do everything, as we described above, then your problem regarding how to connect a disconnected intercom is removed by itself. But this is if you are friends with electricity and all that is connected with it.
If you are far from such topics, then it will be useful for you to know about situations when trying to solve a problem regarding disconnecting the intercom for non-payment, how to reconnect everything yourself, turns out to be a failure of the entire intercom in the entrance. Such reviews say that your neighbors will not be delighted with what you have done.
But if your knowledge in electrics tends to zero, then you need an electric friend, if you interrupted the intercom for your debts. How to connect it yourself, if you do not understand the issue of electrics, it is better not to even delve into it, you will ruin everything. Ask your electric friend, and he will help you in this matter.
Some of your neighbors, judging by the reviews, will generally not appreciate your actions if they see it. For this reason, you need to work quickly and at a time when there is the least traffic from your neighbors in your entrance.
Also, if in the course of your manipulations you break the intercom and someone notices you in this matter, it is very likely that you will have to pay for the repair or replacement of the intercom. This is evidenced by the reviews of those who fell into a similar unpleasant situation. The amounts are very, very tangible. So once again think about whether it is worth the risk.
Advice
What can I advise?
- If you know a lot about the electrician, but you just never solved problems with the intercom, you can print the instructions on a piece of paper and take it with you, this will help you connect the apartment to the intercom faster and without errors.
- Disabling the intercom, turning it on is quite simple, but you will need at least a minimum of tools (screwdrivers, wrenches, pliers, etc.).
- Disconnect the intercom from the network (do not work under voltage), this will allow you to reduce the risk of electric shock to zero.
- According to the ads, you can find a person who for a certain fee will do this procedure for you. Typically, such people have extensive experience in such matters, they work quickly, clearly and with a guarantee for their services.
- Do not get into a situation where you need to do such things.
To summarize
The intercom is a useful thing that makes the life of a city dweller easier and safer. But for everything in our time you have to pay. You need to pay for the intercom. We would recommend that you make timely payments for the maintenance of the doorphone, so as not to engage in illegal independent connection later.
Of course, no one excludes situations where management companies and other organizations are engaged in real requisitions, which cover up with a fee for using the intercom, but if this situation occurs, then everything is decided in court. If truth is on your side, then justice will prevail.