In many homes, a bath is a must. For attractiveness and durability, a frame is used for the product. You can either buy it or make it yourself. Read more about the bathroom frame in the article.
Why do i need
Bathrooms are made of stone, wood, copper, silver and gold. But the most popular products are steel and cast iron, coated with enamel or acrylic. To the interior of the room was a certain style and the room was comfortable, you can use the frame for the bathroom. This design holds the bowl and sides. What is an acrylic bathtub frame for? If it is durable, suitable for the bathroom, then the mount will be reliable and stable.
The frame is needed when buying a product of its original form:
Unusual shapes cannot be fixed on walls. A framework in the form of a platform is required. Wide sides of the product are attached to the frame, so that it will be installed stably.
Pros and cons
Bathtub frames have their advantages and disadvantages. The pluses include:
- Guaranteed stability of product installation. The support is necessary both for an acrylic bathtub, and for a cast-iron, aluminum.
- You can choose any frame for an acrylic bathtub or other plumbing, since the construction is made of bricks, metal or wood, but in the latter case, processing with protective equipment is required.
- The space under the bathroom closes, which spoils the view of the room. Outside, the structure can be finished with tiles or other materials.
Significant mass is distinguished from the disadvantages, especially if bricks are used. Then, the load increases on the overlap, so before working, you should check whether the additional mass will be maintained. The disadvantages include the difficulty of independent work. To do this, pre-perform calculations, select materials.
If wooden slats are used, it should be checked whether they are properly dried. Before use, they are coated with an antiseptic to protect against rot. If metal strips are purchased, then they should be protected from corrosion, for which a special composition is applied. With processing, the product will last much longer.
Design
The product consists of the following parts:
- The base of the frame is a wooden beam, which repeats the shape of the bath.
- Racks are called vertical elements. Rarely, if there are inconveniences of installation, it becomes necessary to mount the braces.
- There is an upper belt that protects against load transfer through the racks to the base. It is also needed for spatial rigidity.
- There is a sheet of particleboard with a hole that coincides in contour with the vertical surface of the bowl. The tolerance is upward. This element is used for rectangular bathtubs.
- All parts are attached to each other.
Materials
Reinforced bathtub frame is a reliable way of fixing the product so that during operation it does not swing and slide. The stores have universal designs, but they can not be used for all models, especially since without fitting they do not fulfill their functions. It is much easier to create a support on your own. The following materials are used for this:
- Wooden beam. Wood is considered an environmentally friendly, lightweight, durable material. You do not need a special tool to work with it. Assembly and installation can easily be done independently. This option is the most economical. The only negative is the low resistance to moisture and fungus. So that during operation the frame does not rot, the beam is repeatedly treated with an antiseptic.
- Metal profile. It has low strength and bearing capacity, therefore, it is used for the manufacture of auxiliary supporting products and the installation of a decorative plasterboard crane.
- Profiled pipes or metal corners. According to experienced craftsmen, this is the most reliable frame. Depending on the thickness of the pipes, it can withstand heavy loads, so they are able to support heavy baths.
If profiled pipes are selected, then welding is required. Although the all-welded product is the most durable, it is still easier for an inexperienced master to work with a beam, for which you only need a hammer and a saw. The frame for the acrylic bath is created from these materials. The product will serve as a reliable support.
Are there any differences between the frames
Installation rules are almost the same for different bathtubs:
To fix a steel or cast-iron bathtub, you can use the legs or attach to the walls using an iron corner. The most solid support is made of bricks, which is closed with a finished or home-made screen.
Acrylic products need a stable support that protects against load and deformation. In such a bath, the bottom is elastic, but it is not strong in comparison with other materials, so it can bend. Moreover, the sides are constantly deformed, which will lead to moisture entering the joints between the bathroom and the walls. There will appear mold and other negative consequences. Therefore, the frame for the bathroom is desirable to extend its service life. And its need arises when the thickness of the product is not more than 0.5 mm.
Kinds
The stores offer frames for certain bathtubs that are on sale. But not all supporting products carry the mass of the bath. Therefore, it is important to choose a suitable frame. Supporting products are:
- National teams.
- All-welded.
If there is no suitable model in the store, then you can create a frame for an acrylic bathtub or other product yourself. For this, a tree, a galvanized profile or a profile iron pipe is suitable.
Selection recommendations
It is necessary to consider the ratio of strength and quality of the bathroom, as well as the number of support points of the frame. It is believed that the thinner the bath, the better support it needs. An all-welded product indicates a lack of strength. It is desirable that there are 4 points. If the font has an unusual design, then a special platform is needed, since the standard frame will be unreliable.
Device
The frame frames that are included with the bathroom are made of square metal profiles and have a special coating. The main details of the frame include:
- Supports that hold the bowl in the corners.
- Height-adjustable legs.
- Stiffeners, which must be at the acrylic bathtub.
How to do
If the finished product does not fit or is unreliable, then you can do it yourself. How to make a frame for the bathroom? At home, you can create a product from wood, moisture-proof plywood or chipboard. The procedure is as follows:
- Create a base around the perimeter of the bath from the beam.
- Fix vertical racks to it.
- Boards or timber are laid on them - they serve on horseback.
For a rectangular bath, this is enough if, for example, it is oval, then the frame is covered with a sheet of chipboard or plywood, in which then a hole of the required shape is cut.
Assembly
How to assemble a frame for a bathroom? Before installing a wooden product, you need to determine the height of the racks, which depends on the height of the frame. It should be small so that the bathtub is comfortable for the whole family. It is not difficult to determine the number of racks: they must be in each corner and additionally fastened every half meter at the sides.
To help you should use the construction level. Installation is as follows:
- A self-tapping screw with a corrosion-resistant coating should attach a wooden base to the concrete floor.
- Fix the racks on the base with metal corners or wooden blocks.
- If the stand is attached to the wall - they are attached to it.
- The beam should be laid over the racks and fixed with screws to the walls and racks.
- A sheet of 15 mm plywood or 25 mm chipboard should be attached from above along the perimeter.
- According to the template that is included in the set, a hole is created with a saw or an electric jigsaw.
- The frame must be closed on the sides with shields.
Installation
It is more convenient to fix the bath with the completion of surface decoration with different materials:
- Drywall.
- Plastic.
- Tiled.
The choice of material depends on the material capabilities and taste preferences of the owner. At the bottom of the frame, pour a cement pillow and immediately place a bath on it. Installation will be more difficult if there is no lining:
- Lay pads made of plywood, wood, suitable for the thickness of the tile and adhesive layer under the sides.
- Gaskets are evenly distributed around the perimeter.
- The bath should be lowered into the hole on a cement base.
After the solution has hardened, plumbing should be performed: connection to the water supply and sewage system. On this installation of the frame and the bathroom is completed.