High humidity in the bathroom, condensation on the walls and floor - a picture known to many. If you are faced with such a problem, then it's time to abandon the old ways of dealing with this phenomenon. It is time to take the most drastic measures. You need to purchase a fan for extracting in the bathroom.
Why ventilation
Typically, typical bathrooms are not too spacious. Often you notice that a small room is instantly filled with steam. As a result, condensation settles on the walls, floor, and ceiling. Because of this, the decoration of the room deteriorates, mold appears on the walls.
Bathrooms usually do not have a window. Therefore, the only way for fresh air to enter is through ventilation systems. However, they are often ineffective and can not cope with the load. To find out how well your ventilation system is working properly, just attach a piece of paper to the grille that closes it. If he “sticks” to it and holds on for a long time, then your system is normal. If this does not happen, therefore, you need a modern exhaust fan for the bathroom. This simple device will help you to forget about the troubles associated with high humidity.
Hood with a fan in the bathroom: characteristics
Today, the most famous and unfamiliar manufacturers offer various models of these necessary devices. They differ not only in price and design, but also in technical characteristics. Especially popular with consumers are models equipped with a timer. Since this is primarily an electric device, it is undesirable to work around the clock, especially if most of the day there is no one in the house. The timer allows you to turn on the fan for extracting in the bathroom for a certain time, for example, for 15-30 minutes. There are models equipped with humidity sensors. They turn on when the air is saturated with moisture, and turn off after a certain period of time or when the desired result is achieved.
If you live in an apartment building, then it has its own ventilation system. It is designed for several floors and a number of apartments. In this case, it is more advisable to install a fan for drawing in a bath with a check valve. This element will not allow air from the pipe to enter the room, it will protect from small debris, unpleasant odors.
Choose an exhaust fan
Today on the shelves of construction stores there is a huge selection of various devices from world famous manufacturers. They differ in their design, price, number of additional features. How to choose a fan for the bathroom so that it completely copes with the task assigned to it?
Axial fan
Such samples in their design resemble a propeller. It perfectly pumps the required amount of air through a short ventilation tunnel. However, installing such a device on a concrete or brick channel, which passes through several floors to the roof, is inefficient. Such a model is more suitable if the room has good natural traction, and channels are no more than six meters long.
Exhaust axial fans of such a company as Vortice (Italy) have proven themselves well. Their new Punto Four and Punto Filo models work silently and reliably. These samples have non-return valves, but they do not exclude natural ventilation when the device is not working. The price of such samples ranges from 2400 to 8200 rubles (depending on the availability of additional functions).
Centrifugal fan
If you want to quickly ventilate the room, and at the same time it is important for you that the device works quietly, you need a centrifugal fan to extract it in the bathroom. Such models have a very wide range of performance, various design, speed adjustment mode. Covert or surface mounted models are available, with humidity sensors and timers.
Such fans have an original design. Inside the plastic case is the so-called “snail”, familiar to us from huge industrial fans. She is small and almost silent. Fans of this type pump the required amount of air through a rough and long channel, and at the same time they will work quieter than axial. They are somewhat more massive, but if desired, they can be hidden in the wall. Only a decorative grill will remain in sight. Do not forget that the fan is not a design element, but a device that removes exhaust air from the bathroom.
Pay attention to the Vortice models - Vort Quadro, Vort Press, Ariett. The exhaust fan for the bathroom, the price of which is from 4,500 to 7,000 rubles, works at different speeds, has a humidity sensor and a timer. It remains only to choose a suitable device.
Ventilation fans for bathrooms: how to install
First of all, it is necessary to remove the grill covering the channel and, if possible, clean it. If you can’t do it on your own, then you need to call specialists who will rise to the roof of the house and do all the "dirty" work.
Try the fan on the hole in the wall. If it is not included a bit, you can slightly expand the entrance to the channel or change the store to a more suitable one.
Now the grill and mesh should be removed from the fan. Replace it, secure with dowels or polymer glue. Connect it to the mains.
Hood Installation Tips
When installing the exhaust fan in the bathroom, some rules must be observed to make the device more efficient.
- Install the hood on the opposite wall from the door.
- The fan must be installed in the ceiling. In this case, natural ventilation will help him work better.
- When connecting the device to the mains, it is better to make a separate switch for it.
Today, customers are offered a large selection of hoods. Choosing the right option is easy. The exhaust fan for the bathroom is a very necessary and useful device. By installing such a simple device, you will quickly appreciate its advantages.
Popular fan models
Today we want to introduce you some popular models of bathroom hoods.
Vents (Ukraine)
A 100 M3 fan with a rectangular front grill is designed for small rooms. Can be mounted on a wall or ceiling. The case here is made of ABS plastic, the 7-blade impeller works silently. The price is 1285 rubles.
Electrolux (Sweden)
The exhaust fan for the bathroom is equipped with a humidity sensor, it runs silently. This sample and interchangeable panels for it are made of their ABS plastic. The model is very reliable. A timer is provided. The price is 2360 rubles.
SILENT (Spain)
Silent exhaust fan 100 CP is by far the most popular model. Has a non-return flap valve. It works at temperatures up to +40 degrees. The price is 4850 rubles.
Ballu (Russia) BN-100T series
Designed to remove exhaust air through channels with a diameter of 100, 120, 150 mm. It is made of ABS plastic, has fuses and a highly efficient impeller. The price is 1650 rubles.
Marley (Germany) SV – 100
This model consumes little electricity (power is only 1 Watt). Settings are made using the touchpad located on the panel. Touch technology eliminates contact with conductive elements.
All Marley fans have a long service life, operate quietly, and installation is simple. The price is 9570 rubles.