OP-2 fire extinguisher: main characteristics and application features

Fire is a serious natural disaster that can cause very large damage and even kill. Therefore, each person needs to know how to deal with the flame. OP-2 fire extinguisher is a device that will help localize and eliminate a fire source.

Product Specifications

fire extinguisher op 2

It should be noted that this unit is portable. In this case, the extinguishing agent inside the cylinder can be re-pumped. It is constantly under pressure, which ensures the release of contents outward if necessary.

OP-2 fire extinguisher has the following characteristics:

- The temperature at which you can store and use the device is -40 - +50 degrees.

- The length of the jet during the ejection is 2 m.

- The total exit time of the extinguishing agent is 6 seconds.

- Charge weight - 2 kg.

- The service life of the device is 5 years.

In this case, the OP-2 fire extinguisher does not have a flexible hose. It is charged with fire extinguishing powder, as well as carbon dioxide, which provides pressure inside the cylinder.

The presented devices can have different weights - from 2 to 50 kilograms. The latter type is installed on a special trolley, with the help of which it can be quickly delivered to the place of fire.

Scopes of the device

powder fire extinguisher op 2

Now consider where you can use this device. So, the OP-2 fire extinguisher is designed to eliminate fires in civilian facilities and in industrial buildings. Naturally, you will not be able to extinguish the entire fire with one apparatus.

OP-2 fire extinguisher (3) is a modified device. It can also be used to eliminate fire in switched on electrical installations where the use of water or foam is not acceptable. Even with its help it is possible to eliminate the ignition of gases, combustible materials. That is, you are allowed to extinguish objects such as vehicles that transport gasoline or other substances, electrical switchboards and high voltage lines .

Advantages of the device

fire extinguisher op 2 characteristics

OP-2 fire extinguisher, you already know its characteristics, has such advantages:

1. Instant response. The fact is that the starting lever is pressed simultaneously with the release of the extinguishing composition. For other devices, this process may take several seconds.

2. Economic benefits. Even despite the size and cost of the product, it is able to eliminate the flame from a sufficiently large area.

3. Ability to refill. Even if you have not used the device for five years, try to change the extinguishing agent inside the cylinder.

4. Availability.

Naturally, such a device is not without flaws. The fact is that during extinguishing, deposits form on objects that are difficult to remove. Indeed, at high temperature, the powder melts. Therefore, this device cannot be used to extinguish fires, for example, in museums or galleries where valuable exhibits are present. They can be destroyed not by fire, but by powder.

It is recommended to install products in automobiles, as well as at facilities where oil products are processed, chemicals, poisons are produced.

Application features

fire extinguisher op 2 3

Powder type fire extinguisher OP-2 must be able to use. In order to quickly eliminate the source of ignition, observe the following rules for operating the device:

1. First, hold the product near a flame and shake it well. Next, pull out the wedge (or check) and sharply press the button with the needle. Release her immediately.

2. Wait a few seconds, direct the fire extinguisher into the fire and press the start lever.

3. Try not to direct the jet at yourself, as you may get severe burns. Therefore, during operation, you must always take into account where the wind is directed.

4. If the fire is extinguished, simply release the start lever. Then you can use the device again, if necessary, until it runs out of powder. However, after application, it is better to refuel it.

5. It is better to direct the jet at a certain angle (20-30 degrees).

6. When extinguishing, try not to breathe the gas that forms.

7. Do not install fire extinguishers near batteries or other radiators. Also, do not leave the device in direct sunlight.

You have learned how to use a powder fire extinguisher. Always keep it in good condition, even if you never have to touch it.

Source: https://habr.com/ru/post/B2074/


All Articles