As a result of exposure to hard water, limescale may form on the tile. In this case, the salts remain, even despite the use of any cleaning methods. Splashes of plain water, falling on the tile, after a while will cause the appearance of limescale, which is not so easy to get rid of. But the worst part is that over time, mold and fungus can join this problem. They not only negatively affect the appearance of the walls, but also are extremely harmful to health. This is especially true for children and people suffering from diseases of the respiratory system. Therefore, for every housewife it is extremely important to have information on how to clean the tiles in the bathroom. For this, it is absolutely not necessary to use expensive modern means. Simple folk methods are also very effective.
Useful Tips
Even a white tile in a bathroom can be covered with noticeable plaque spots over time. They are characterized by a rough surface and a crystalline structure. To resist pollution it was easier to wet the bathroom at least once every two weeks.
Today in any large supermarket you can buy special detergent compositions for the bathroom. They help to clean not only limescale, but also help get rid of mold and rust. The most effective means in the form of a spray, they are quickly and evenly applied to the surface. As an option, it is also worth trying a simple dishwashing gel. It is easiest to scrub limescale in the bathroom with a special sponge. Tiles with a pattern are not recommended to be washed with products containing abrasives.
Before using the detergent to clean the tiles, try it in a separate area. The surface must not deteriorate under the influence of chemicals. If you do not conduct such tests in advance, then you can permanently ruin the tile.
Cleaning tools
How to clean tiles in the bathroom from plaque? For a simple cleaning, you will need:
- soft sponges;
- universal viscose wipes;
- old toothbrush;
- small terry towels and microfiber.
Modern housewives are advised to use a steam cleaner to clean the walls of dirt and plaque. After processing with moist warm air, it is recommended to wipe the tile with a window cleaner and wipe it dry. This will make the surface shiny and radiant. Work on cleaning the bathroom from plaque is carried out using rubber gloves and eye protection.
Causes of mold and mildew
This issue must be emphasized. Mold in the bathroom can form not only at the joints of tiles, but also on their surface. It is best to start fighting the fungus at the initial stage. In this case, you can protect yourself and your family from problems.
Fungus and mold may appear on the walls due to:
- violation of tile laying technology;
- too high humidity in the room;
- lack of regular antiseptic treatment;
- improper ventilation system.
It is best to use special cleaning compounds to combat fungus and mold, such as Silite Bang. However, they are not cheap, and they are not always available, especially in small shops. If you don’t have such a tool at hand, you can try other methods for cleaning the tiles.
Alternative remedies
How to wash a tile if there is no special product at hand? Experienced housewives are advised to try a solution of bleach or ordinary whiteness. It must be applied to the surface of the walls and left for half an hour or an hour. After this, the product will just need to be washed off with clean water. During the procedure, special respiratory protection devices should be used, since the chemical composition has a specific pungent odor. Immediately after processing, the room should be well ventilated.
If the joints between the tiles are most dirty, then you can try to clean them with a special hard brush and soda ash. In addition, for bleaching the joints between the tiles, it is worth taking hydrogen peroxide. It just needs to be applied to the surface and not washed off. If all the measures described above were ineffective, then you will have to change the grout for the seams. The surface should be pre-treated with an antiseptic. It is best to use special grouts for bathrooms. Of course, the easiest way to clean surfaces is to use a steam cleaner. Tiles, tiles, glass after such processing will simply shine.
DIY cleaner
How to bleach the seams between the tiles without using special compounds? At home, you can easily and simply prepare a cleaning product for a surface that does not contain aggressive substances. Such a composition is suitable for tiles of any kind. It has no pungent odor and removes any type of contamination.
To prepare a solution for washing tiles, you will need:
- hydrogen peroxide - 100 grams;
- liquid laundry soap - 50 grams;
- baking soda - 5 grams.
All of the above components must be mixed and applied with a soft sponge or cloth to the surface of the tile. The composition should be left for 10-20 minutes, then rinse with warm water. If you use toilet instead of laundry soap, a homemade product will have a pleasant aroma.
How to quickly clean floor tiles?
So is there any secret? Floor tiles are highly resistant to abrasion. Therefore, for its cleaning, it is quite possible to use substances containing abrasives. Light or white tiles are best washed with warm water with the addition of soda ash. Dark tiles should not be cleaned like this, as there may be stains. In this case, it is most effective to use warm water with the addition of a special product, for example, Silite Bang. After it, there will be no stains, besides it will give a delicate fresh aroma.
We clean a light tile
On white tiles, black mold in the bathroom is most noticeable. How to get rid of this unpleasant manifestation? If the pollution mainly affects the joints between the tiles, then in this case it is best to use soda ash or washing powder. You can also try to wipe off the dirt with a kitchen cleaner that does not contain large abrasive particles.
Tiles, tiles and other surfaces are easily washed without the use of household chemicals. Many tools at hand can easily cope with any kind of pollution in the bathroom. Among experienced housewives, a solution of soda and vinegar received wide popularity. Already 10 minutes after applying this product from dirt and whitish spots there will be no trace.
Limescale and dirt can be cleaned using citric acid. You just need to rub the walls with a slice of citrus or sprinkle with a concentrated solution of citric acid and leave it in this form for a while. After that, the surface is simply rinsed with warm water.
You can clean the tiles in the bathroom using vinegar. This substance helps not only to get rid of stains, but also gives the tile shine. Liquid ammonia will help remove dirt and deposits. Also, this tool removes fungus and mold well. When working with this composition, you should definitely use a protective mask, since it has a very unpleasant pungent odor.
To clean any surfaces in the bathroom is real and with the help of acids. However, it should be borne in mind that they can ruin a glossy tile. When working with compositions of this type, be extremely careful.
We fight with rust
We have already figured out how to remove black mold in the bathroom. How to get rid of other dirt on the tiles? You can use different methods.
To clean the rust, it is worth using tartar. This substance is usually sold in powder form. They are sprinkled with the necessary area, and then wiped with a sponge dipped in water. To make the cleaning process faster, it is recommended to pre-treat the surface with hydrogen peroxide.
How to clean the tiles in the bathroom from rust? Baking soda and vinegar help to get rid of stains. To process the surface is only in rubber gloves. The sponge should be moistened in a 6% vinegar solution, and then sprinkled with baking soda. After these two substances enter into the reaction, it will be possible to begin processing.
Tile rust can also be removed with lemon juice and salt. The contaminated area should be moistened and left in this condition for 25 minutes. After that, the surface is sprinkled with salt and in a circular motion eliminate rust spots. It is best to use a cookery powder in which there are no stones and crystals.
Features
Before trying to remove any contamination from the tile, it should be clarified whether this surface has any characteristic feature. For example, matte tiles need to be cleaned only using specialized tools. Strong contaminants can be cleaned if ammonia is used. After it, a special emulsion is used for matt ceramic products. This method will help for a long time to maintain the original appearance of the tile.
If the tile, on the contrary, is glossy, and you want it to shine, then you need to take a special wax. Some believe that you can use the same tool as for a car body. However, such a composition will immediately wash off under the influence of water and hot steam.
Conclusion
In this review, we examined in detail how to clean the tiles in the bathroom. You can use both ready-made compounds and folk remedies. Recipes based on ammonia, vinegar, citric acid, soda and salt in most cases are extremely effective. Try to clean your bathroom regularly. Then you do not have to suffer, wiping off severe pollution.