So far, few people know about such sanitary equipment as a hygienic shower - a bidet is much more popular. But this device has one serious minus. These are overall dimensions. Installation of a bidet is possible only in fairly large bathrooms. Installation of a hygienic shower is also possible in small rooms. Even more - this equipment is mounted directly next to the toilet. There are models that can be built into the toilet. Thus, it easily turns into a complete complex for hygiene procedures.
Let's take a closer look at these devices. Today we find out what types they are, study the features of installation, as well as products of different brands.
Advantages of installing hygienic showers in bathrooms
Water procedures are an important part of hygiene procedures. This also includes access to the toilet. That is why in expensive five-star hotels it is difficult to find a toilet without a bidet.
It should be noted that the bidet is the best of what is for personal hygiene. However, it is impossible to install it near the toilet in a typical toilet of a residential building because of the size. Therefore, for lovers of water procedures, the installation of a hygienic shower will help to solve this problem.
In bathrooms with a bathtub and toilet, at first glance, there is no need for a bidet, since the shower cabin or bathtub is located almost next to the toilet. But thanks to the hygienic soul, you do not have to move around the bathroom once again. If the toilet is separate and there is not enough space in it (as it was in Soviet high-rise buildings), then installing a hygienic shower is what you need to do first.
This equipment saves space. It also significantly saves time on procedures. Hygienic shower allows you to seriously save finances. The cost of these solutions is much lower than even the most affordable bidet.
Shower makes it easier to clean the bathroom - with it you can very quickly clean the cat tray or baby pots. For mothers with young children, installing a hygienic shower also helps to solve a lot of problems - caring for a child is greatly simplified. It will also be easier to carry out water procedures for the elderly or with disabilities.
With some shower models, there is no need to use toilet paper. Plumbing equipment may partially function as a bidet.
Mixer Features
Structurally, a mixer with a hygienic shower is no different from a traditional design. An exception is a hose and a watering can. The latter is fixed on the wall or toilet bowl - this makes it possible to more comfortably carry out water procedures. It should be noted that you can use the mixer separately from the shower. Water enters the shower only by pressing a button on the watering can.
Classification
This equipment is divided into types according to the features of operation:
- Bidet toilet.
- Bidet cover.
- Wall mounted hygienic shower.
- Showers with thermostat and sink.
All of them have their own characteristics and differences. Below we look at each type in more detail.
Bidet toilet
This device implies the presence of a built-in nozzle on the toilet.
It should be on the device’s body, or on a special retractable fitting. In order to ensure the supply of water, it is necessary to mount the hose separately, as well as the mixer. It can be purchased both separately and in a hygiene shower kit.
Bidet cover
This design is a toilet lid in which a shower is already integrated. Among the advantages of high mobility. The system is suitable for all types and types of toilets. Such a built-in hygienic shower in the lid can be taken with you when moving to new housing. Usually the lid-bidet has an electric drive, which is very convenient during operation.
Manufacturers can equip similar designs with additional options - for example, a hairdryer, water heating.
Wall-mounted hygiene shower
To equip this system, you first need to purchase and install a special type of mixer, where there is no spout. In addition, this solution differs from the usual ones by the presence of a shower head with a special shut-off valve. The sizes of a watering can are much smaller than an ordinary shower.
During installation, the need for supplying both cold water and hot should be considered. When mounting on an already installed toilet, it is better to use a tee in which there is access to a cold water pipe, to the shower and immediately to the toilet.
You can often find a hygienic shower with a thermostat and a heater for wall mounting. Due to the presence of a thermostat, it is enough to adjust the temperature of the water once and then never engage in adjustment.
A set of such equipment includes a wall mount. It is hung at a small distance from the mixer for easy operation.
There are two types of such devices. It is an open construction and hidden. In the case of an open shower, the mixer is located on the wall. A hose with a shower head is brought to it. Seals in the form of gaskets are installed between the watering can and the mixer hose.
Installation of a hidden shower involves a partial analysis of the wall. This is necessary in order to bring water to the device. It is usually necessary to break a niche in the wall. In the case of choosing just such a design, it is necessary to install a special type of mixer - hot and cold water is connected to it. Then the niche is finished and decorated. The lever for controlling the hidden hygienic shower is discharged into the hole, and then a hose and a watering can are connected to it.
The reviews of many people indicate that the hidden option is very convenient to use and does not impair the overall interior design. But such a system is better to install during the repair. With the existing decoration in the toilet, no one will want to shatter the wall. Especially if an expensive tile with a unique pattern was used.
Showers with thermostat
We have already partially examined hygienic showers with a thermostat. But such an element can be installed not only on the wall, but also on other types of devices. The element is built directly into the watering can. Such a shower can be equipped with a hose and holder, as well as a special mixer.
Shower with sink
This design is installed on large areas. This is a separate sink, which is already equipped with a mixer for a hygienic shower. The latter is already equipped with a watering can and a corresponding hose.
The disadvantage of this design is the incomplete shutdown of the shutoff valve. When the shower is finished, it is necessary to shut off the water supply at the mixer. If the equipment is equipped with a spout, then it will be impossible to forget about the need to shut off water. When the liquid is supplied, it will flow into the sink.
Plus this system in an additional washbasin, where you can wash your hands after the process directly in the toilet.
Installation Features
The installation process and its features depend on the specific type of equipment. Some types of installation may require major repairs (for example, if we consider a hidden shower). Other designs are easily installed without the need to make niches in the walls and somehow change the wiring in the water supply.
Installing a toilet bidet
This design is mounted in the same way as a conventional toilet. But it is necessary to make an additional water supply and install a mixer. The connection process can be carried out in three ways:
- The first method involves connecting the cold pipe first to a ball valve, and then to a sufficiently flexible hose.
- The second method requires the installation of two pipes to a concealed mixer. In this case, hot water will flow from the nozzle.
- The third option is to connect two pipes directly to the thermostat and already adjust the water at the right temperature on it.
These designs can be outdoor, and there can be no differences from a traditional toilet. Suspension structures are also distinguished.
Installing a Bidet Cover
Let's look at how the installation of the built-in hygienic shower is carried out. To modernize the toilet using such a device, the first thing to do is close the shut-off valve, thereby blocking the flow of water into the tank. From the latter it is recommended to drain all the liquid. Next, remove the water supply hose to the toilet bowl.
Then remove the old cover and install a hose that will connect the tee to the tank. Next, insert the bolt into a special plug, and then into the plate. Then it all connects to the main part of the system. The main part is installed in place, and the bolts are mounted in the hole on the toilet and tighten. It remains only to connect the system to an already connected tee and check how water is supplied. When installing, it is important to ensure the tightness of all connections. However, do not over tighten the nuts. For additional sealing, experts recommend the use of fum tape.
Wall Mount Installation
Do-it-yourself installation of a wall-mounted hygienic shower. However, you should fully comply with the recommendations that the manufacturer detailed in the instructions. For installation work there is no need to use special tools. As for the configuration of the device, depending on the model, it includes a watering can, hose, mounting plate, rail holder and installation instructions.
If the equipment will be mounted on pipes, then a mixer for a hygienic shower with one fitting or outlet under a hose is suitable. At one end, the hose is connected to the mixer, the second is attached to the watering can. Then the latter is inserted into the wall holder. In order to operate the shower for as long as possible, do not forget to shut off the water after each use. If you ignore this step, then the hose and shut-off valve located in the watering can will be constantly under pressure. Soon they will not withstand work in such conditions and are deformed.
If you are sure that the water will constantly shut off, do not install the shut-off button. However, in this case, all operations will have to be done manually on the mixer, and this is not too convenient. But this approach will eliminate the risk of leaks.
To make a wall-mounted shower, manufacturers use stainless steel alloys that have previously been processed. The watering can is made of plastic with a thin chrome coating. But there are also metal products. The watering can consists of rubber nozzles. They are needed to create a directional jet, as well as to protect against splashing. The hose is most often also made of plastic, and it can have metal inserts to protect it from kinks.
Installation of a design with a sink
The installation process is no different from installing a sink. But the faucet should have a spout and a shower outlet. If the washbasin is already installed, replacing the faucet is very easy. In small rooms, a sink is placed above the toilet bowl. Often, such structures are installed in the corners.
The design of the mixer is a lever, a spout, as well as an additional outlet for connecting a hose. The principle of operation is very simple. When the tap opens, water moves through the spout to the top of the sink. If you press the handle of the shower, the liquid will flow into the toilet.
Browse Popular Models
Hansgrohe hygiene shower models are especially popular among consumers. Manufacturers such as Grohe, Ideal Standart also have a good reputation. As for the cost of sets, the price ranges from 5 to 14 thousand rubles.
Among the range of hygienic showers Hansgrohe there is a wide selection of models for flush mounting, wall-mounted models. This is a reliable manufacturer that produces high-quality plumbing. Millions of people use taps from this company. Reviews about this German plumbing are only positive.
If more budgetary solutions are needed, then you can pay attention to the products of SmartSant, Vidima, Lemark, Bravat. The cost of sets starts from 2.5 thousand rubles. These are less productive options, but they are not inferior in quality to Hansgroe.
Conclusion
Hygienic shower is considered a relatively young equipment among the other generations of plumbing fixtures. But despite its low fame, it is gaining popularity among consumers. This equipment is simple and easy to use. These devices will be a great addition to the bathroom in any style.