In our time, unusual ideas of interior designers are popular. One such idea was a wooden bath, made by hand. Such a solution will not only add unusual details to the house, but also create a special mood. Guests will be surprised at the presence of such a design. The finished product from famous designers will be expensive, it is much easier to make a bath yourself. It will save a large amount of money. How to make a wooden bath with your own hands? Step-by-step instructions will be presented in this article.
Preparatory stage
Before you make a wooden bath, you should clearly imagine this design. Plumbing made of wood has its own nuances and differs from standard appliances for bathrooms. You can make a wooden bathroom with your own hands as in the pictures in magazines, having previously recognized the device of this device, as well as the parameters of the future design.
The first step is to take measurements from the room and the place where the container will be located. On a sheet of paper you can make a drawing where the dimensions of the product will be visible. You should carefully approach the issue of buying wood. Do not chase the most expensive as well as the cheapest types of wood. It is better to choose the middle option, which has the best value for money. Boards must be cut to the same length. The blanks must match the thickness. If you correctly perform this work, it will be easy to assemble the bottom. Do not forget about the need for a drain hole. It can be cut by yourself. It is worth considering the issue of draining and bringing pipes in advance.
Design features
DIY wooden bathtub, as in the photo below, is a special container. It is intended for swimming, that is, it has the same tasks as standard acrylic designs.
In wooden bathtubs, you can independently make a drain hole, as well as screw the legs. There are various models. They are distinguished by additional equipment. The design of the wooden bathtub may also differ from the usual for all options.
Elements such as nozzles can be added to the product. They are needed for hydraulic procedures. Some do air massage when they take a bath. Highlighted for chromotherapy are in great demand. Some add relaxing music. Using the remote control, you can switch your favorite songs without leaving the bath.
What determines the capacity installation option?
DIY wooden bathtub implies several installation options. For some containers, legs are needed, for others, a pedestal. To install the pedestal, you need a spacious room. Standard bathrooms in apartment buildings are not suitable for this. You need a room where the bath will be located in the center of the room. If legs are required for the tank, it can be installed in a standard bathroom. Professionals advise making bath legs from the same material as the design itself.
What parameters can a product have?
A wooden bathtub, made by yourself, can be of any shape. It all depends on the preference of the homeowner. Products can have different weights, and also vary in wall thickness.
If the container is made in the form of a barrel, then the sides, their height will be important. The capacity of this design can also be different. A container of this type can fit from one to six people.
Depth of product may vary. Usually, it ranges from 53 centimeters to 70 centimeters. The wall thickness can also be different. Some prefer to make thin, others like the coarser and wider walls of the bathtubs. Modern designers prefer to create products with thin walls. They adopted this idea from Italian companies producing unusual plumbing.
For private homes and country cottages, professionals are advised to make deep bowls of bathtubs. They correspond to the style of rustic, as well as primitivism. Thick walls of the structure make the owner feel harmonious, they add a feeling of unity with nature.
Wood bath dimensions
Wooden bathtubs, as in the photo in this article, may differ in their dimensions. They can be from 1.8 to 2 meters long. The width of a wooden bath, made by yourself, can be from 70 centimeters to 90 centimeters. Some people prefer to create wider designs.
The weight of the wooden sanitary ware may also vary. The minimum value is 60 kilograms, and the maximum design can weigh up to 300 kilograms.
It should be remembered that a wooden structure cannot have a mass of less than 30 kilograms. If the bath still weighs less, then most likely it will not support the weight of water.
You can make a wooden bath with your own hands with different volumes. The minimum value is 280 liters. Often there are designs for 500, as well as 700 liters. As a rule, they are intended for bathing 3-4 people at a time.
Types of bathtubs
For a bathtub made of wood to last a long time, you need to find out what types and forms of it are. Important features of each design:
- The easiest option for manufacturing is the round shape of the bathing container. Most often, this type is installed in baths or country houses. The design is easy to construct and does not require additional costs.
- A boat in the shape of a boat is characterized by the structure of the material and looks as natural as possible. It allows you to feel unprecedented lightness when taking water procedures. Some models have a wood frame and a small staircase. It is needed for the convenience of getting inside the container.
Types of materials
To make a wooden bath, you must follow the instructions. It is important to choose the right type of material. The following types are distinguished:
- Solid wood.
- Fragments of wood (large, small).
- Whetstones.
- Small planks. They are often called rivets.
- Veneer can be of two types: artificial and natural. This material has a low price.
Design Tips
To make a bath of wood yourself, you need to be extremely careful. You should try to maintain the natural color of the tree, as well as the structure of the material. Taking the desired shape, the product should not lose the natural properties of the material.
When processing the surface of a structure, water repellent properties should be added to the wood. You need to be prepared for the fact that the processing of wood will take a lot of time.
It is necessary to specify the prices of materials in advance. Wood species differ in cost, some are overpriced per linear meter.
Price policy
The most expensive wood species include teak yellow-orange, as well as a mahogany array. Available species for the average consumer include larch and cedar. This group also includes oak, linden and pine. These rocks are ideal for making a bathtub. They are not inclined to absorb water.
What tools and materials are needed to work?
For successful work on creating a wooden bathing tank you will need:
- Sander.
- Woodworking machine.
- Special impregnation.
- Sealant, wood glue.
- Special varnish for wood.
- Wood of a particular breed.
It should be noted that you need to buy materials and mixtures that do not have toxic substances. They must not lose their properties in contact with water and withstand temperatures equal to 70 degrees Celsius.
Which option is easiest to design?
The simplest assembly option is a barrel-shaped bath. To do this, make a frame and fit the rivets. An important point will be the fastening of the metal belt. When making the bottom of the bath, it is necessary to carefully adjust the lamellas with special care.
Every detail of the barrel should be perfectly smooth and polished. Most often, this bath option is used in baths. For an apartment it will be better to make a model using bars of different shapes and lengths. To do this, you will need a grinder and a machine for processing wood.
At home, it is easier to assemble the product from small bars. It is better to opt for a simple model of the bathroom, so that it fits in any bathroom in a multi-storey building.
Difficulties can arise when assembling the walls of a bathing tank. It is recommended to glue the surface of the bottom with tape, it will create additional protection for the product.
At the processing stage, do not forget about the primer for wood. It is necessary to improve grip. Finishing the product should not begin until the bath has passed the leak test. After passing this stage, the design and final processing of the product is acceptable.
To process the inside of the tank, you need to polish it, and then apply several layers of a special polymer coating. Lacquer is applied last.
Conclusion
So, we looked at how to make a bath yourself. As you can see, this is a workable task. It is enough to have instructions and a basic set of tools.