The bathroom has many items. For the plumbing to work properly, all the little things should be considered. Even such an accessory imperceptible at first glance, like a plastic border, plays an important role. How to properly stick a corner on the bath should be studied before starting work. Both functional and aesthetic qualities of the product depend on this.
It’s easy to stick a corner to the bathtub. The main thing is to carry out all the actions carefully. In this case, water will not leak to the floor, stagnate at the joints. Step-by-step instructions for gluing the border on the bath will help to make everything right.
Corner appointment
A plastic corner on the bath is installed in order to seal the joint between the plumbing equipment and the wall. It prevents water from leaking onto the floor.
To understand how to properly stick a corner on the bath, you should study the technology presented below. Having performed all the steps correctly, it is possible to achieve a decrease in the humidity level in the room. A fungus will not form here, and metal objects will not be covered with rust.
In addition, water leaked to the floor can leak onto the ceiling of neighbors from below. This will ruin the expensive repair, which will have to be compensated from your pocket.
The choice of the best option for gluing the skirting board to the bath is influenced by many factors. These include the size of the gap between the wall and plumbing, the type of surface finish, as well as the size of the funds that the owners allocated for the purchase of this accessory.
Types of borders
Getting acquainted with the technology, how to install a plastic corner on the bath, first of all determine the desired type of product. There are curbs on sale with factory glue coating and without it.
In the first case, there is a high probability of peeling off the baseboard from the surface. Factory adhesive does not have good strength. This is especially noticeable in conditions of high humidity.
If the bathtub is not firmly attached to the wall, there is greater or lesser vibration. This will also cause depressurization of the seams. Therefore, experts recommend adhering to the technology of gluing the border on the bathtub, in which a clean corner is involved.
Plinths made of plastic can be rigid or in the form of a tape. On sale there are a large number of options for forms, coloring of such products. There are no big differences in their installation. How to install a plastic corner on the bath is discussed below.
Solid skirting boards and their installation
The plastic baseboard for the bathtub is easy to install, so everyone can correctly stick it. In addition, the cost of such products is relatively small. This makes solid plastic borders so popular.
When buying it, you should pay attention to the width of the product. It depends on the gap between the bathroom and the wall.
Most often, a PVC corner is presented in white. But there are other options that allow you to fit it into any type of interior.
This is a universal corner in the bathroom. How to glue a PVC border, experts give advice. Best, in their opinion, are "liquid nails."
You can glue the curb onto the bathtub on or under ceramic tile. In the first case, the corner closes the joint between the plumbing and the finished coating. In the second option, you will first need to glue the border, and already lay the coating on it on the wall.
Skirting board and its installation
There are several options for gluing a tape corner to the bathroom. Often this product already has a layer of special fixative substance. However, if the owners are interested in the question of how to glue the skirting board to the bathtub qualitatively, you should still choose another sealant.
If desired, the factory glue can be carefully removed from the plastic product. This is done with a knife. The main thing is to carry out all the actions carefully.
Sometimes such a fixation layer is left, but an additional silicone sealant is used.
Different tape widths will also help you choose the right border. It is even easier to install than a hard corner. However, it is used in case of rigid fixation of the bath.
Glue for corner
The border, in essence, does not close the gap through which water seeps to the floor. It serves as a decorative element that covers the sealant layer.
To understand how to correctly glue the skirting board for the bath, you should present its appearance at the end of the work. Colored sealant emerging from the corner will not add beauty to the overall appearance of the room. Therefore, transparent types of glue should be used.
If the bath is white, then a sealant of a similar shade will also look pretty good.
Also, the fixation substance must quickly grab, otherwise you will have to hold the corner manually for a very long time.
It should be noted that in case of gluing the border to the acrylic bath, it is necessary to select a sealant for plastic. It must be sanitary. The composition of this glue includes additives that interfere with the development of the tribe and microbes. Acrylic sealant is not suitable for bathroom conditions. Therefore, waterproof adhesives should be purchased. They are silicones.
Preparation for installation
Before gluing the curb to the bath, prepare the base. This process is especially important for replacing the old corner. It is carefully dismantled and traces of old glue are removed from the wall. For this you have to use a knife.
Clean dirt and old sealant carefully so as not to damage the bathtub and coating on the wall. With a wet rag, thoroughly wipe the place where the old baseboard was installed.
Then make disinfection. This procedure is also carried out for a new coating during repair. You can just use bleach. Today, there are many sanitary facilities for disinfection.
A clean base is thoroughly dried. To do this, you can use the usual hair dryer.
Measurement of a border
Before buying a new product that prevents water from getting on the floor, you should properly measure the bath. To do this, measure its length and width with a tape measure. Next, two skirting boards are purchased in accordance with the dimensions obtained.
Houses on new corners mark the length. Next, the main stage of solving the question begins, how to glue the curb onto the bath. Step-by-step instructions will help you understand the sequence of actions.
Using a hacksaw for metal and using a building miter, the corner is sawn off on both sides. This must be done at an angle of 45 degrees. Then you should attach the border to the bathroom and check the correct size.
Gluing corner
Having put a plastic baseboard to the bathtub, with the other hand glue the masking tape 2 mm above the upper edge of the corner. Below is a similar operation.
It is recommended to cover the bath with newspapers. This will prevent its glue contamination. The corner is removed. On the walls and side remains masking tape. The master then has no choice but to glue the curb onto the bathtub. Technology and expert recommendations suggest the use of a construction gun at this stage.
With it, a layer of glue is laid, starting from the corners and around the edge.
The corner is applied to the contour of the sealant, slightly pressing it to the base. You can come up with an emphasis that allows you to squeeze the curb and wait for the glue to stick. It lasts about 20 minutes.
Final stage
When it takes half an hour after pressing the corner, they clean off the excess protruding glue. Then, white sealant is applied to the places where the border fits to the wall and the bath.
To do this, masking tape is again glued to the curb, as well as above and below it. There is another nuance of how to properly stick a corner on the bath. Using a spatula, push the edge of the plinth off and introduce a white sealant into the resulting small space.
With a rubber spatula, the substance is smeared and leveled throughout the seam. This is done above and below the corner.
Next, masking tape is carefully peeled off. It should make an even beautiful seam. It dries, according to the manufacturer's instructions, for a certain time. Apply sealant thinly, but in a solid line. The point technique in this case is unacceptable. There should be no voids over the entire surface of the seams. They must be uniform.
On this, the installation process is considered complete.
After familiarizing yourself with the technique of how to properly attach a corner to the bath, you can perform the job efficiently. At the same time, the border will reliably protect the joints from water flowing through them to the floor, and will also help to reduce the humidity level in the room. A neatly glued corner will give the bath a well-groomed appearance and protect the seams from the formation of fungus. Performing all the actions according to the instructions, everyone can carry out this work on their own.