Sooner or later, any bathtub (even expensive and exclusive) loses its appeal. The fact is that over many years of active use, the surface layer (that is, enamel) becomes thinner. As a result, ugly smudges, unaesthetic yellow or even red spots appear, as well as chips and roughness. It is at least unpleasant to take hygienic procedures in such a bathroom, so many people come to the conclusion that the old bath must be replaced. However, the purchase of new plumbing is an expensive pleasure, besides the dismantling of the old bathtub in 99% leads to damage to the finishing materials. An ideal option is updating the bathroom.
How to paint a bath made of cast iron, sheet metal or metal? The easiest way is to use enamel in the form of a spray. A bath painted with high-quality enamel will again look chic and aesthetically pleasing!
How to paint a bath at home?
Is it possible to update a plumbing that has lost its appeal? It is worth mentioning right away that painting the bathroom will require accuracy and thorough processing, but if you follow the instructions, everyone can paint their own bath.
Want to know how to paint a bath at home and get an excellent result? In this case, you should purchase all the necessary materials and carefully study the phased work plan.
For work, you need such materials:
- enamel;
- primer;
- special degreasing agent (traditional acetone can be used);
- lint-free napkins (preferably made from natural fabric);
- protective plastic film;
- construction tape;
- sandpaper;
- thick rubber gloves, mask;
- detergent and clean sponges.
Bath preparation
Enamel painting the bath is quite simple. To do this, prepare the surface for painting.
- All surfaces to be painted should be thoroughly washed with detergent.
- It is necessary to dry the bath.
- Using sandpaper, you need to remove the top layer of old enamel. Particular attention is paid to damaged areas.
Bathroom preparation
- Dust that remains after working with sandpaper is removed with clean, lint-free wipes. Be sure to dry!
- From the bath you need to disconnect the drain and the overflow piping.
- Faucets, showers, etc. carefully closed with a dense film of polyethylene.
- With the help of a film and adhesive tape, it is necessary to close all surfaces with which the bath is in contact.
Primer surfaces:
- the primer of the surface must be done with a brush;
- after drying, the primer should also be treated with sandpaper;
- dust is removed with lint-free dry wipes.
Spray paint
- The paint is applied in three layers. This is done with smooth movements at a distance of about 25-35 centimeters.
- In places where there were stains, chips and drips, the paint should be applied in a thicker layer, carefully painting over all the ugly places.
- After applying each coat of paint, wait about 30 minutes (to dry the top coat of enamel).
- After processing, the bath can be used only after 2-3 days (until the paint has completely dried). Drying time depends on weather conditions and air temperature. Accordingly, the hotter, the faster the paint dries.
Following these simple rules, everyone can paint the bath with enamel and save on the purchase of new plumbing.
Why overpay, buying a bath, and make redecorating after dismantling and installing new plumbing, if you can update the bath with minimal effort?
How to paint a cast-iron bath at home?
Cast-iron bathtubs are painted just fine. Using the above tools and following the step-by-step instructions, you can paint the bathtub made of cast iron, metal or tin at home. It is desirable that the room in which the staining will be carried out is well ventilated. When working with aerosol, it is imperative to wear a mask and gloves. Enamel in aerosol is a chemical substance that should not be inhaled. Protection will help to avoid unpleasant consequences with health.
Cast-iron bathtubs have a large number of advantages, they perfectly retain heat, so that the water does not cool for a very long time. Therefore, if your bathtub made of cast iron has lost its attractive appearance, do not rush to change it to a model made of more modern materials. Enamel painting will save the situation.
Paint selection
How to paint a bath at home? The choice of materials is very important! The result of work directly depends on the accuracy of application and, of course, on the quality of the paint used.
It is worth mentioning right away that there is no need to save excessively and buy cheap paint, which is neither reliable nor high quality. Otherwise, this will entail additional costs.
So which paint is best to paint the bath? Experienced specialists who have extensive practical experience recommend the use of epoxy-based paint-enamel. Such paint is produced in the form of an aerosol and has excellent characteristics. The manufacturer should also choose a well-known and reliable. Large companies value their reputation, so their products comply with all existing international requirements and standards.
Is it profitable to paint the bath yourself?
You may also be interested in the question: “How to paint a bath at home?”, But you doubt that this venture is worthwhile.
Painting a bath is several times cheaper than replacing it. This is not just savings, it is an opportunity to increase the life of any bathtub at least one and a half times! Work on updating damaged plumbing will not take much time, and the result will exceed all expectations.
The bath, painted with a quality spray, looks like new! At the same time, the cost of enamel in aerosol and other materials is relatively small. Especially when compared with the cost of a new modern bathtub. The benefits are obvious.
Useful tips will help you to maintain an excellent coloring result for a long time:
- do not soak laundry in the bath;
- Do not leave water in the bath for a long time;
- Do not use chemical detergents that can damage the enamel.
Any bath is subject to restoration! The main thing is to show patience, accuracy and use quality materials.