We begin the long-awaited repair in the bathroom. For starters, of course, we buy tiles. And then? And then we decide who will put this tile - you or a person specially invited for these purposes. If you decide to do it yourself, then proper preparation for the process and adherence to technology will help you achieve an excellent result.
How to lay tiles in the bathroom? Preparatory work
The most important condition is a properly prepared surface. The base for the tile should be perfectly flat. If you are too lazy to smooth the walls with putty, then you can very well use plywood or drywall. If you do not want to remove the old tile, then it is quite possible to lay a new layer on it as a base, but provided that there are no cracks and cracks in it. And if there is no old coating and the floor is flat, then it can be laid directly on concrete.
How to lay tiles in the bathroom? Step 1
Once you have figured out and chosen which base will be, clean the bathroom floor from various debris and dust. If the surface is uneven, use bulk floors or leveling mixtures. We align the basis and check the result using the level. We try on the tile, that is, without glue, put it in the necessary order on the floor and see how it goes, where it will need to be cut. Furniture and plumbing before this procedure is best removed or moved away. The purpose of this layout is to see where the joints will be. It is necessary to put it in such a way that in visible places the tile does not have to be cut.
How to lay tiles in the bathroom? Step 2
After the masonry is selected, we do the marking. To do this, use a pencil to draw an approximate tile layout on the floor, for this you need to find the central location node and start marking from it. In order not to get lost in the lines, you can pull the ropes.
How to lay tiles in the bathroom? Step 3
See if the floor surface is really free of debris and dust, if so, then you can start laying. For ceramic tiles need special glue. Lubricate them with a base, about a square meter, starting from the center of the bathroom.
For the glue to spread evenly, smear it with a special flat spatula. The layer of material should be from three to five centimeters. Then, on the adhesive applied to the base, it is necessary to draw the notched side of the spatula. The larger the tile, the more waves you need to make. Gently place the tile on this square meter of the base with glue and leave it for half an hour. Then we continue the process from the center to the edges.
To ensure that the tiles have the same distance, spacers can be used. Once you have laid all the material on the floor, it remains to report those parts where they need to be cut. To trim all unnecessary, you need to use a tile cutter. After the tile has been laid, leave it for a while, as indicated in the instructions. You can’t walk on the surface until it is completely dry.
How to lay tiles in the bathroom? Step 4. Grout
It can be different depending on the base: on cement and on epoxy. Usually they use grout of classic colors, but you can choose it for the color of the tile. Mix the solution with water according to the instructions and apply with a rubber spatula between the tiles. Next - remove the excess with a sponge soaked in water. Wait about half an hour and wipe off any remaining grout. After an hour, repeat the procedure. Remember, if any parts of the grout remain on the tile, then it will be very difficult for you to wipe it off.
As you can see, there is nothing complicated in this process. Not sure how to lay tiles in the bathroom? You just need to know the laying technology and properly prepare the foundation. And everything else is a matter of technology and your hands. Go ahead, try, you will surely succeed!