How to wash an acrylic bath at home? Tips for washing with improvised and special means

Perfectly clean plumbing is the desire of every housewife. However, choosing what to wash an acrylic bathtub at home, you should choose the right tactic. Otherwise, you can say goodbye not only to an unpleasant raid, but also to the plumbing itself. Therefore, we will consider how to clean an acrylic bath at home and what means are completely unacceptable for this coating.

Care Rules

Keeping an acrylic bath clean is very easy. Therefore, before resorting to cleaning products, it is recommended that you simply wash it with warm water. Such a simple method will get rid of many small contaminants.

For regular preventive washing, you should use a soft sponge and a specially designed product (how to wash an acrylic bath at home will be discussed below).

The washing process is extremely simple. Initially, the surface must be moistened with water. After that, a cleaning agent is applied to a soft rag or sponge and the bath is wiped. The surface must be rinsed with water and wiped dry. To make it shiny, you can use a wax polish.

The more often you will resort to the usual washing of the surface, the less often you will think about how to clean the acrylic bath from plaque at home. It is recommended to repeat this procedure once a week.

Prohibited Means

An acrylic bath has many advantages. However, she has one significant drawback - this is a low mechanical strength. Therefore, it is important to know how to wash an acrylic bath at home in order not only to provide it with an ideal look, but also to protect the surface from damage.

It is strictly forbidden to use the following tools and means for this plumbing:

1. Brushes with a metal or other hard coating.
2. Cleaning products, which contain substances: chlorine, ammonia, acetone, formaldehyde, abrasive components.
3. Washing powders.

It is strictly forbidden to wash the bath “dry”. Purification always involves the use of water.

Means for cleaning acrylic bathtubs

For washing the surface, it is allowed to use liquid substances, which do not contain aggressive components. This will allow you to easily and quickly clean the plumbing.

There are also specially designed tools for these surfaces. So, how to clean an acrylic bath at home?

Consider the most popular tools:

1. "Acrylic". The substance acts on the surface very quickly and is quite effective. It removes mold, rust, soap residue, plaque. Leaves no micro damage, scratches. After using this product, the bathtub is covered with a light protective film.
2. Ravak. These are tools that are used to remove grease, stains, rust, scale. They perfectly disinfect the surface.
3. Acrylic Polish. An effective product designed for acrylic surfaces. Differs in low cost.
4. Tim Profi. A modern product that does not contain abrasive ingredients. It allows you to achieve crystal clearness and at the same time leaves no scratches.
5. "Mr. Chister." A fairly cheap solution that can effectively remove rust and plaque. In addition, this agent has an antifungal and antibacterial effect.

Water Stone Removal

The main problem that occurs in people who have installed an acrylic bath is plaque on the surface. However, eliminating it is completely simple. So, how to wash an acrylic bath from plaque at home?

The following measures should be taken to remove water stone:

1. Type warm water into the bath. Its temperature should not be higher than 30 C.
2. Add vinegar - 0.5 liters to the water. Instead of this component, you can use citric acid. You will need 1 pack per bath.
3. Hand stir water. Leave the bath in this condition overnight.
4. Waking up in the morning, release the water. Be sure to rinse the surface. Then wipe with a dry towel.

Such measures are enough to get rid of the raid. But what if there is too much water stone and failed to be completely eliminated? How to wash an acrylic bath at home? The cleaning agents described above will perfectly save you from plaque. For example, Acrylan or RAVAK Turbocleane.

Getting rid of yellowness

For acrylic surfaces, such defects are completely uncharacteristic. Often yellowness occurs in bathtubs made of inexpensive plastic with a protective layer.

Initially, it should be said that such spots appear from poor-quality water, a sharp change in the temperature of the liquid. It is precisely to such situations that plastic reacts by staining. In addition, it is very important that the acrylic is always dry. It is completely unacceptable that the bath stagnant water. Be sure to check the taps. Of these, water should not drip to the surface.

It should once again be reminded of how to wash an acrylic bath. At home, cleaners that are specifically designed for such coatings will perfectly eliminate yellowness. You can use the substance "Acrylic". An excellent fluid is Tim-Profi. Such a tool effectively cleans even very neglected surfaces. In addition, it perfectly disinfects the bath.

Perfectly remove citric acid from yellowness. It is recommended to dissolve 1 sachet in 1 glass of water. Apply the resulting liquid to an acrylic surface. Then rinse thoroughly. Your bathtub will become snow-white again.

Funds check

If you don’t have the necessary fluid at hand, you can use another one. However, how to choose the one that perfectly cleans and does not harm the surface?

Initially, be sure to study the composition of the substance. The product should not contain aggressive components.

Further, in order to determine how to wash an acrylic bath at home, it is recommended to resort to a little trick. Apply selected fluid to a small area. Choose an inconspicuous area. For example, on the side. And it’s best to apply the product on the bottom of the bath. Leave on for 20-30 minutes. Then rinse this area. Carefully examine how the bath responded to this cleaning agent.

If no defects were found, then the liquid is completely suitable and you can proceed to the washing procedure.

Bath disinfection

Acrylic surfaces, as a rule, do not contribute to the growth of mold and microorganisms. However, even they need regular disinfection measures. Therefore, when planning how to wash an acrylic bath at home, be sure to think about such a cleansing. This is especially true for those families in which there are children. Should crumbs be exposed to additional risk?

Disinfection of the bath is a fairly simple event, which is recommended to be carried out once a year.

For the procedure, it is necessary:

1. Type warm water into the bath.
2. Add a little disinfectant to the liquid. You can use the above-mentioned Tim-Profi liquid. Stir the water.
3. The bath should remain in this state for 10-15 minutes. Then release the fluid.
4. Be sure to rinse the surface. All residual solution must be removed. Do not forget to wipe the bath dry.

Chlorine disinfection

There is another method to clean the surface. However, you should be extremely careful with him. Since high consistency can cause surface damage.

To disinfect with chlorine, use the instructions:

1. Type water into the bathtub.
2. Add chlorine to it. The solution should be 7%. Carefully monitor the consistency.
3. Wait a few minutes. Then open the drain.
4. Rinse the surface thoroughly and wipe it dry.

It is strictly forbidden to wipe the acrylic bathtub with a clean chlorine solution. It will not only damage the surface, but will also leave yellow disgusting spots.

Caring for acrylic bathtubs is not particularly difficult. The main thing is to perform all the procedures regularly and use only those products that will not damage the surface.