Winter is the most traumatic season. Therefore, non-slip coatings are an indispensable element where the adhesion of the legs to the surface is not too good. Naturally, today's market offers a wide range of such materials, so you need to understand how to choose them correctly.
What is a coating?
Consider what anti-slip coatings are. First of all, these are special materials that have a rough surface. Thanks to which you can safely walk on them, even if there is icy tiles on the street or indoors.
It should be noted that such materials may or may not be abrasive. The choice of type depends on where anti-slip coatings will be used. These products are purchased in ordinary construction stores, so there is no shortage of materials.
Coating Benefits
Now we will consider what advantages the presented products possess. So, among the advantages we can distinguish the following:
1. Ease of use.
2. High effect.
3. High prevalence and affordable cost.
4. Easy to install.
5. Great variety.
6. Resistance to wear.
7. Safety of materials used.
8. Possibility of application for almost any surface.
The main advantage is that anti-slip coatings help you protect yourself from accidental falls and serious injuries.
Where is the coating used?
The presented material can be applied everywhere: both in the building and on the street. For example, non-slip flooring can be used in the bathroom or hallway if you have too smooth tiles there. Certain materials should be glued to the bottom of the bath so as not to fall into it.
This material is required for the equipment of ramps and steps. Thanks to him, a wheelchair or pram will be able to safely call on a certain elevation. Often a non- slip rubber coating is used for steps on the street or in public places where tiles or marble are used for construction.
In principle, these materials can be attached wherever there is an increased risk of injury by falling.
Variety of products
Now consider what types of coatings exist:
1. Non-abrasive. They are characterized by high wear resistance and good slip resistance. Most often they are mounted in baths, pools or saunas, that is, where the humidity level exceeds the norm.
2. Elastic anti-slip coating on the porch. It may or may not have an adhesive base. Most often laid on the floor in industrial premises.
3. Anti-slip tapes that are equipped with photoluminescent elements. They can provide safety in places where there is no lighting or is very limited. Such tapes quickly and simply attach to the base, are small in size and hold firmly to the surface for a long time.
4. Abrasive coating. It is best to use such tapes in office and industrial premises, as well as in those buildings in which a large number of people accumulate daily. The material has high strength and efficiency.
5. Aluminum corners and strips. Basically, such materials are used to equip steps.
6. Anti-slip systems.
7. Liquid anti-slip coating on the porch.
How to secure the stairs?
A staircase is a high-risk building on which it is very easy to slip and fall. In order to avoid such problems, it is necessary to choose anti-slip coatings on the steps. They may be different. Most often, aluminum corners or metal strips combined with rubber are used for this purpose. They are screwed to the steps with screws.
Sometimes special glue-based linings are attached to the stairs. Anti-slip coatings on steps can be whole systems that provide safety. I must say that the pads can have different sizes. For example, the tape is attached to the entire step or to its edge.
To ensure that the staircase is not slippery, you can use not only rubber or polyvinyl chloride materials, but also carpets. Thanks to them, you not only achieve the required level of security, but also decorate the steps.
How to equip a ramp?
Today, the ramp must be present in any public building or store, so that people with disabilities can satisfy all their needs. However, if it is still not difficult to call it in the summer, then in winter it is practically impossible to do this, since the rise becomes very slippery. In this case, it is necessary to apply a non-slip coating for the ramp.
Most often, narrow strips of aluminum and polyvinyl chloride are used, which provide good traction with the wheels of the stroller. These materials can be on an adhesive basis or screwed in with screws. Sometimes a combined method of fastening tapes is used, which provides high coating strength.
In some cases, the ramp is finished with rolled rubber flooring. It is necessary to pay attention to the quality of this material. It can perform its functions both in summer and in winter. The advantage of this material is that practically no ice is formed on it. It is very simple to purchase such a coating; it is not a deficit.
The anti-slip coating for the ramp is a guarantee of safety.
How to choose a similar product for the bath?
In the bathroom , you also have the opportunity to fall and injure yourself. And both on the floor and in the bath. Therefore, anti-slip coating here will be very appropriate. So, on the floor you can use special rugs that do not allow slipping. In addition, they should have a soft and warm surface so that they can be stepped on barefoot. Such products additionally decorate the room.
The anti-slip coating of the bath will make the bathing process not only pleasant, but also safe. You can purchase such material in any store. Please note that it will often be exposed to hot water, therefore it must be resistant to high temperature, high humidity, and also to wear. In this case, it is advisable to buy high-quality material that will be well attached to the surface. Give preference only to well-known manufacturers who have a good reputation.
How to attach the anti-slip coating to the surface of the bath?
This process is time consuming and responsible. First you need to carefully prepare the surface for work. To do this, try to completely clean the bath of rust, soap scatters and salt deposits. If you wash it using special tools, then after the procedure, the surface should be thoroughly rinsed with warm water so that it is well cleaned.
Next, the anti-slip coating of the bath must be marked and cut in accordance with the required dimensions. The markup procedure must be carried out very carefully. In addition, the cut out rug should be circled in the bath itself so that you stick it exactly along the contour.
The next stage of work will be fixing the coating. First you need to stick the middle of the material so that it does not budge. Next, you need to carefully stick the edges of the mat, gradually removing the protective film. Be as careful as possible in the drain area. While gluing, smooth the material with force so that it is well fixed on the surface of the bath.
All actions must be performed slowly and carefully. And again: do not remove the protective film all at once, in this case the mat will attach crookedly. Also, do not touch the adhesive layer with your hands, as the product can quickly stick. That's all the tips. Good luck