Owners of down jackets know that their washing often ends with bitter tears. A beautiful jacket or coat turns into a kind of bag. Having taken out a knocked-down lump from the washing machine, the girls begin to scold themselves for sparing money for dry cleaning. But do not despair, it is better to ask how to straighten down in the down jacket after washing.
Most often, these problems are associated with the fact that drying technology is violated. When the product becomes very thin, most likely, it was held upright and not shaken. Therefore, the fluff crumpled and sank down. In addition, poorly dried material can smell unpleasant.
We carefully read the labels!
Almost all modern products have a label that indicates the features of care. As a rule, manufacturers recommend washing down jackets at low temperatures, using a gentle mode. If the item is of high quality and well stitched, then the losses will be minimal. To avoid the fact that after washing the down jacket the fluff has gone astray , you can put several tennis balls in the machine along with the product.
How to behave after washing?
Immediately after the machine finishes washing, the down jacket must be laid out in a horizontal position and pinch it well. So all the fluff that is crumpled will be repaired. When the product looks like a jacket, you need to let it dry.
After the moisture has gone a little, the down jacket can be hung on a hanger until it dries completely. To fluff down, you must regularly pinch the thing. It will also prevent the appearance of an unpleasant odor, which appears when the product does not dry well inside.
As it dries, the thing becomes easier, so straightening the lumps is not difficult. So that the fluff in the down jacket after washing does not get off, you can apply the method, which is called “contrast drying”. To do this, the product must be taken out alternately in the cold, then in the heat, not forgetting to whip the filler each time.
Extra spin
When the down jacket dries, it must be placed in the washing machine along with tennis balls and the “Spin” mode must be activated. After this, you should thoroughly beat the thing with your hands by analogy with a pillow and gently straighten the fluff.
Can I iron the product?
Some down jackets have a special impregnation, which is indicated on the label. In this case, it is more advisable to wash the item in dry cleaning. Incorrect actions at home can lead to the fact that she will lose its original appearance. But if you still decide to figure out how to straighten down in the down jacket after washing, you need to adhere to the rules of ironing so that the fabric does not lose its moisture-proof properties.
Ironing Rules
Before ironing the down jacket, you must make sure that the minimum power is set. Temperature values should be within 110 degrees. The wrong side can be ironed without gauze, but it is better not to risk it on the front side.
To achieve a good result and understand how to straighten down in a down jacket after washing with an iron, it is worth sprinkling the product with water - then it will be easier to remove wrinkles. If the iron is equipped with a steam function, you can use it.
The down jacket should be hung on a hanger so that it does not touch other surfaces. By setting the minimum temperature, you can proceed to steaming. If you thoroughly process the entire area, this will help to avoid jams.
If there is no steam iron, you can use a hot shower. Steam should go near the product. When the down jacket is heavy and picks up moisture, you need to transfer it to the room. Under the influence of steam, the thing will recover. It is important to ensure that the wet product is not crumpled.
How to dry a down jacket?
When thinking about how to straighten down in a down jacket after washing, it is worth remembering that drying such a product is a rather time-consuming task. But you should not delay it, it is advisable to do it in the first two days after washing. It is very important to provide a down jacket with good ventilation and warm air. In the summer, you can take the thing out or hang it on the balcony.
Until the down jacket is completely dry, it must be periodically shaken and whipped. If the filler falls off, returning it to its original state will be much more difficult. But you do not need to fumble wet fluff much, as this can cause damage to the sacs where it is located. This will cause the filler to crawl out, which does not look very nice.
In winter, drying a down jacket is a little more difficult, as the room is often humid and cool. In this case, you can use a fan with warm air or a heater.
If necessary, lay the down jacket in an upright position on a drying rack. It must be ensured that it is well straightened and not crumpled. To make it easier to understand how to straighten down in the down jacket after washing, the main rules should be followed. Do not place anything under the product, such as a towel or cloth. This will prevent air from circulating. So that the fluff does not stick together, the thing needs to be patted and shaken.
If the fluff has gone astray ...
This situation is far from uncommon, so you need to know what to do if, after washing the down jacket, the fluff is lost. To a greater extent this applies to those products that consist of 100% fluff. The main task is to break the lumps, dry the filler and place it evenly. You can return the original form to the down jacket in several ways:
- Be patient and hands whip each bag.
- Put a down jacket on the sofa, after laying a blanket under it, and beat the product with a beat. This will help break up the lumps and distribute the filler over a jacket or coat.
- Load the item into the washing machine and put small balls or balls in the drum. Scrolling at high speeds, get a down jacket and shake it well.
- Dry the product with a hairdryer, whisking with your hands.
Vacuum drying
Faced with problems drying a coat or jacket, not everyone knows how to straighten down in a down jacket after washing with a vacuum cleaner. To do this, the product must be hung on a coat hanger and use a nozzle for clothes. But this method is suitable only if the vacuum cleaner is equipped with a function of blowing air.