The main type of fuel for two-stroke engines is a mixture of oil and gasoline. One of the causes of damage to the mechanism may be the incorrect manufacture of the mixture presented. The situation is also fraught with troubles when there is no oil in gasoline at all. To make a mixture of this kind, a special oil is used that has a special marking. It indicates why it is necessary to use it. Experienced drivers and mechanics know that creating an effective mixture is not so simple. It is necessary to correctly calculate the ratio of gasoline and oil for a two-stroke engine.
Some car owners resort to personal recipes, supplementing the mixture with certain “classified” components, among which there is also soda. For the correct production of the fuel mixture, certain requirements and recommendations of the manufacturer must be observed.
Fuel and oil
To determine exactly which ratio of gasoline and oil to use for a two-stroke engine, it is important to know all the operational properties of the equipment for which fuel is needed. For this purpose, the most common gasoline and oil from a variety of manufacturers are most often used. For the described process, the 92nd or 95th gasoline is best suited.
It should be noted that many manufacturers write a variety of proportional proportions of a mixture of gasoline and oil for two-stroke engines. It is important to always look at the oil canister and at the instructions for its use, where the necessary proportions can be written. The brand of oil must be chosen, focusing on the preferences of the owner of the car. Before buying, it is very important to study the product description, which must indicate what equipment it is intended for.
Rules for making the mixture
The entire process for the production of the presented mixture must begin with a clear study of the instructions. As mentioned earlier, some experienced drivers do everything by eye. Naturally, over time, each driver remembers the proportions. However, it is better to read the instructions before starting the manufacturing process.
Rules for using the mixture
The proportions of gasoline and two-stroke engine oil must never be changed. Some drivers do not attach much importance to this rule. Since oil is expensive, they try to save it. However, an insufficient amount of this component in the mixture is fraught with the fact that the piston and cylinder directly overheat the engine itself. As a result, problems arise that require a thorough repair.
How much oil should be added to gas for a two-stroke engine if its percentage cannot be reduced? If you increase the amount of this component, it will affect the functioning of the engine. Excess oil will produce carbon deposits, and the motor mechanism will wear out faster.
It is important to remember that it is impossible to keep the prepared mixture for more than a month, as it loses its own characteristics, and its use will adversely affect the engine.
It is necessary to watch that dirt, dust or other debris does not get into the presented mixture, because of which the engine will stop working.
Mixing process and proportions
How to understand how much oil per liter of gas for a two-stroke engine is required? It is very simple to calculate, since all the basic data is at hand. For example, it is written directly on the package how much oil per liter of gasoline is needed to produce a high-quality mixture. The amount of this ingredient may vary, depending on the manufacturer. Most often, proportions of 1:50 or 1:40 are used. There may be some deviations from such parameters.
As soon as clear proportions are determined, it is necessary to proceed to the manufacture of the mixture. A variety of containers are perfectly suited for this process. It is very important to know that it is forbidden to mix fuel with oil in the gas tank itself. The mixture must be done separately. Pour it into the tank only after the end of the process.
Container in which you can prepare and store the mixture
- Special containers for mixing. They look like canisters with several holes. To make the mixture, the already calculated ratio of gasoline and oil for two-stroke engines should be poured into the canister, close it and tilt a couple of times. Such containers are very comfortable, but their cost is high. If you need to make mixtures often, it is better not to spare money and buy yourself a similar container.
- Plastic or metal canisters. It is necessary to be careful when using such containers made of glass or plastic, since when using them, a discharge of electricity can occur. If you need to make a little mixture, then a simple plastic bottle is perfect.
- The means at hand. To save money, a large number of motorists use a variety of capacities available to them. This is not prohibited, but you need to be sure that gasoline will not corrode the packaging material.
Mixture storage
Manufacturers say that keeping the mixture is best not just in a clean container, but in one that is made of metal. It is important to remember that you cannot leave such containers under the scorching sun. Heating will not only spoil the mixture, but can provoke more unpleasant consequences.
The maximum storage time of the fuel mixture is a month.
Depending on how often the car is used, some drivers make the mixture several times a month, and others several times a week. Naturally, not every motorist constantly measures the ratio of gasoline and oil for two-stroke engines, but prepares a mixture for the future. However, do not forget that a fresher product will better affect the functioning of the engine.
Many motorists use plastic canisters as well as plastic bottles to store the mixture. It is quite comfortable and practical. For a bottle, you can easily find a suitable place in the garage. But with such a container, you must be careful. since during prolonged storage in a plastic container, the mixture can violate its integrity. It is worth noting that the process of corroding plastic is quite fast. For this reason, it is more reliable to store mixtures in a container made of metal.