Chevrolet Niva is an SUV that is gaining more and more popularity among car owners. It is not surprising, because the car is practical, reliable and will not get stuck in the first pit. Trips out of town on sedans and do become a torment. Often lovers of long trips and outdoor recreation think about using additional equipment.
What is a towbar?
The towbar on the Niva is a special coupling device designed to connect the car and trailer. Such a device allows you to carry additional cargo, which has no place in the passenger compartment and luggage compartment of the car.
If a vehicle is itself a source of threat on the road, a towed vehicle is a double threat. For this reason, the selection and installation of equipment must be taken seriously.
Manufacturers of towbars for Niva have the appropriate specialized equipment, all parts are quality tested and have the necessary certificates of conformity.
Handicraft production of towbar models
The first Niva models did not have the necessary towbar mounts, for this reason car owners had to develop and install equipment on their own or go to artisan workshops, which created significant risks.
Independent production of towbars suggested several types of installation:
1. Installation and mounting on the bumper rails.
2. Installation and fastening on side members and body.
Such constructions did not pass any checks, so they often became the cause of road accidents. In addition, the appearance of the installation itself sometimes puzzled passers-by. Often the client expressed a desire to use gas equipment, the cylinders of which were installed right on the back of the car. For this reason, the design was attached to the side members, and its appearance was quite strange.
Hitch on the Chevrolet Niva
Chevrolet Niva, unlike its predecessor, has the necessary elements for installing equipment:
1. There are attachment points that are reinforced with threaded connections.
2. Attachment points for the tow bar are available on any Chevy, but when selling a model without a tow bar, they are simply sealed with tape.
For this reason, the owner of the SUV can independently cope with the installation of the towbar, following all the necessary requirements. Now the towbar on the Chevrolet Niva perfectly complements the car, guaranteeing safe operation on the road.
An improved model of the machine made it possible to make the hitch not only a means for securing the trailer, but also an element of bottom protection. Ease of use of the design is felt at the first application. Any distance to the updated SUV will be on the shoulder.
Terms and conditions of use
To safely install and use the towbar, you need to know some rules:
- Despite the fact that the maximum weight of the cargo to be towed is 1300 kg, it is not recommended to reach the maximum point in order to avoid damage and accident.
- An increase in the speed of transport of more than 90 km / h is not allowed.
- The static load on the clutch should not exceed 50 kg.
- Installation and maintenance of all equipment must occur in accordance with the stipulated rules.
- The installation of additional equipment for security purposes is best done in a specialized service center.
- Changing the design of the traction component is prohibited. Otherwise, the manufacturer is not liable.
Standard kit for installation
If you still decide to install the towbar on the car yourself, then you can purchase special equipment both in the car shop and in the car dealership. Before making a purchase, consult with the seller and make sure that this kit is designed for Chevrolet Niva.
The following items are included in the standard set:
- Hitch.
- Socket.
- Postings.
- Rosette.
- Cap of the ball.
- Necessary fasteners (bolts, nuts, washers, caps).
In addition to the kit must be attached: installation instructions and certificate of quality of the goods.
Towbar installation: Chevrolet Niva
The installation process is simple and does not take much time. Some craftsmen cope with the procedure on their own in 10-15 minutes. The main rules for reliable installation and operation in the future are compliance with the installation rules and the use of only certified components.
Installation can be divided into two stages:
1. Installation of power elements.
2. Connect the outlet to the electrical wiring system of the car.
Installation of power structures
The towbar on the Niva do-it-yourself is installed as follows:
- The car is installed on bridges over the pit.
- The equipment installation sites are washed.
- The adhesive tape pasted at the factory is removed.
- The hitch is applied directly to the Niva.
- The bolts included in the towbar kit are greased.
- Install the equipment carefully, tightening the bolts well and securely.
- To reduce corrosion, the attachment points should be treated with a special compound.
Electrical connection
Installing a towbar on the "Niva" involves the connection of electronics. This process is quite complicated and requires care, since the quality of the car will depend on this. If the equipment is improperly connected, the electronics or insulation of the wiring may be burned.
To carry out the correct installation, you will need a car wiring diagram, which, as a rule, comes in a set . Additionally, look for the pinout pinout diagram.
The process of connecting an electrical outlet will consist of the following steps:
- Turn off the battery.
- Remove the headlamp (mounted on the rear of the vehicle).
- Using the circuit, install the wire you need.
- Use insulation protection.
- Screw and solder the wire connection.
- Connect the remaining end to the required pin on the power outlet.
- The same procedure is provided for all contacts. The standard set of them is 6. If you want to install a foreign trailer or camping, then keep in mind that they have 9 contacts. Additional elements are used to connect household appliances.
- Separate the junction with a special tape.
- Attach the headlamp to its original position.
- Connect all the electronics and check the operation of the entire installation and the standard functions of the car (the work of the side lights, turn signals and brake lights).
Equipment price
The stores offer a fairly wide selection of models. The towbar on the Chevrolet Niva can be picked up at a price of 2500 to 5000 rubles.
Instead of an afterword
Thus, the towbar on the “Niva”, the price of which is reasonably reasonable for most car owners, is a very convenient and practical device. Its quality and ease of use are especially appreciated by lovers of fishing, hunting and recreation in the country. Installation of equipment is not a big deal, you just need to be careful and follow the instructions.