If you are looking for the perfect solution for insulating your home, you should pay attention to Technonikol Carbon ECO. This material is one of the highly effective heaters in the modern construction market.
Why you should choose it
It has a low thermal conductivity and high strength, which explains its popularity in private and cottage construction. In the manufacture of the material, nanosized carbon particles are used. Thermal conductivity is reduced by nanocarbon, which also contributes to increased strength.
Key Features Reviews
TechnoNIKOL Carbon ECO does not absorb water, does not shrink, does not swell, does not rot and exhibits chemical resistance. According to consumers, this material is an ideal solution for those who are looking for thermal insulation with high performance. And the insulation is based on extruded polystyrene foam, which is one of the highly effective heat insulators.
The plates are saturated with nanocarbon, due to which they have a dark silver shade and have high energy efficiency. Consumers like that Technonikol Carbon ECO is offered for sale in a wide range. Among other proposals, ECO SP should be highlighted, which are heat-insulating boards with high strength. Their thickness is 100 mm. The material is used as part of a shallow base system with a ready-made communications system and underfloor heating. The material is based on the technology "Insulated Swedish stove."
TechnoNIKOL Carbon ECO can also be purchased in the FAS version, which is a modern solution for stucco facades in private construction. Products have flame retardants that help reduce the risk of fire. The canvases have a rough surface, which indicates better adhesion of the plaster layer. This line is specifically designed for use in low-rise and cottage construction. It includes special material for drainage, plaster insulation systems for facades and material used in the construction of insulated Swedish slabs. Consumers like that the materials in this series are certified within the walls of an environmental laboratory and have relevant conclusions.
Specifications
Technonikol Carbon ECO has outstanding technical characteristics. For example, the compressive strength is 250 kPa, which is true at 10% linear strain. Thermal conductivity does not exceed 0.029 W / (m * K) at 25 ° C. The material belongs to G4, G3 * combustibility groups. Its water absorption does not exceed 0.2%. The elastic modulus is equivalent to 17 MPa, and the vapor permeability coefficient is 0.011 mg / (m.p. Pa). The specific heat is 1.45 kJ / (kg.oC). The density can be from 26 to 32 kg / m 3 . The bending strength cannot be lower than 0.25 MPa. Operating temperature can vary from -70 to + 75˚ .
As for the dimensions of TechnoNIKOL Carbon ECO, the thickness along the edge can be from 30 to 80 mm. Length - from 2360 to 3040 mm. Width is 600 mm. The surface is milled. Bending of plates does not exceed 2 mm. If you consider the TechnoNIKOL Carbon ECO, the characteristics of which were described above and should be studied by you before purchasing the goods, you will see that the material has no sag, there should be no thickenings on its surface. If you are not satisfied with the plates of the above sizes, in consultation with the supplier, it is possible to manufacture paintings with other parameters. On the surface of the insulation can be special grooves.
ECO SP Reviews
Extruded polystyrene foam "Technonikol Carbon ECO" is offered for sale in a variety of SP. It is intended for low-rise construction, in particular houses without a basement. Insulation is widely used in the construction of frame houses and buildings from aerated concrete, as well as buildings made of timber with subsequent interior decoration. This material can be used for other types of light houses. Thermal insulation is especially convenient for building plots, in the territory of which the following types of soil:
- sandy loam;
- sand;
- loam;
- water saturated soils;
- clay.
Using the TechnoNIKOL Carbon ECO G4 material, you, according to consumers, will be able to build the foundation using the “Insulated Swedish Plate” technology. The canvases contain holes for laying communications, for example, installing a warm floor system. Customers like that the approach using such plates is complex, because in a short time you can get a warmed base with built-in systems. The surface will be leveled, ready for laying laminate, tile and any other suitable coating.
Expanded polystyrene "Technonikol Carbon ECO" consists of extruded polystyrene, non-absorbing water and chemically stable. It is highly compressive and allows the use of material in loadable structures. Under load, the thickness remains stable. As consumers emphasize, this material is the only specialized product in Russia for building the foundation using the “Insulated Swedish Plate” technology. The thermal conductivity of the layer is quite low, the compressive strength is high, which leads to the popularity of the material in the construction of such foundations.
ECO FAS Reviews
This material is an insulating board based on extruded polystyrene foam. The surface is milled, which, according to customers, is very convenient during installation. Suitable material for insulation of the base and plaster facades. Canvases can also be used for other structures, which have high demands on the adhesion of plates to the base. The bending strength in this case is 150 kPa. The compressive strength varies from 100 to 150 kPa. Thermal conductivity is equal to a figure from 0.03 to 0.032 W / (m • K).
Why choose Carbon ECO. Consumer Opinions
Modern construction technologies have stepped far forward. Already today you can build a house, the facade of which will be ready to last about half a century, without requiring repairs. The base and foundation will not be affected by the forces of frost heaving. All the troubles will bypass the construction if you use "Carbon ECO". This opinion is shared by consumers.
Additional opinions
According to them, the most important characteristic of the material is its high heat-saving ability. When installing a layer of 10 cm, you will provide the house with optimal insulation in most climatic zones of Russia. Home craftsmen emphasize that the material exhibits exceptional strength, so that it does not settle and does not change shape during the life of the product. This indicates that the finish coating of the basement, walls and blind areas, which are insulated with this material, will retain their original condition for a rather long period.