Which decking is best for the fence? Subtleties of choice

The outer fence not only serves as protection against uninvited guests, but also partially serves as a decorative decoration of the local area. It is possible to equip such a design with high quality and inexpensively, if you know which corrugated board is best for the fence. The use of this relatively budget material also has its own nuances. Let's try to understand them and take into account the main features during installation and operation.

What to consider?

When choosing material for the fence, you need to consider not only the appearance and cost, but also the quality of the products. It is necessary to determine which decking is better for the fence at the design stage. A poor-quality metal profile undergoes peeling and burnout over time.

When choosing a material, the following factors must also be considered:

• The thickness of the metal.
• The height of the corrugation.
• Durability of an external covering of a leaf.
• Dimensions of fencing elements.
• Type of mount and racks.
• Norm in the amount of square meters or sheets.

As a result, the question about which is better to choose a corrugated board for the fence, you will get a simple answer: the material that corresponds to the optimal combination of price and quality, as well as the general exterior in color and design configuration.

Metal Profile Characteristics

Any kind of material under consideration consists of thin rolled steel. It undergoes hot dip galvanizing plus passivation, priming and finishing spraying operations. It is two-sided or one-sided.

For example, the inside can be coated with a paint and varnish coat, and the outside can consist of polymer components. This treatment allows you to achieve good strength and resistance to aggressive external influences. Depending on the quality of processing, the parameter of noise and thermal insulation increases, as well as the stability of the structure to frost increases.

What thickness corrugated fence is better to take? Experts recommend the use of sheets whose thickness is at least 0.5 mm. This is due to the fact that the estimated working life of every one tenth of a millimeter is about five years of operation. When choosing a metal profile for the fence, give priority to the quality of the material and the manufacturers, which we will talk about below.

Which decking is best for the fence?

Hundreds of companies produce the material in question. It is not so easy to select sheets that match the required parameters. The following is a list of popular and trusted manufacturers operating in the domestic market:

1. European manufacturers - “Myriad” (Myriad), “West Alpine” (Voest Alpine), “Salgitter” (Salzgitter), “Alzelor”, “Ruukki” (Ruukki).
2. Domestic brands - Severstal, NLMK, MMK.
3. Other manufacturers are Tata Steel from Turkey, Mital Arcelor (Poland).

What thickness of corrugated board is better for the fence? The above firms comply with the required dimensions. And the worst option would be a Chinese counterpart from unknown companies, the thickness of which may not even reach 0.34 millimeters. Such a design resembles foil more than a full-fledged material for arranging a fence.

Criterias of choice

An important point is the processing of the profile on the machines. This option plays one of the significant roles in which corrugated board is better to use for the fence. A defective batch will last a very short time, which implies a lot of troubles associated with the installation and maintenance of the structure.

Another significant parameter is zinc incorporation. According to GOST, the coating should include at least 275 grams of this component per square meter of sheet. Unfortunately, this aspect is often underestimated by 1.5-2 times. The importance of the component lies in the anti-corrosion properties that determine the working life of the fence.

Some indicative tips on the characteristics of the metal profile:

• The optimum sheet thickness should be at least 0.4 mm.
• The inclusion of zinc - from 140 grams per square meter of material.
• A thickness of more than 1.2 millimeters is also impractical, due to the increase in cost along with similar strength.
• It is advisable to choose a product manufactured by a trusted manufacturer.

Profile Types

Before deciding which decking is best for the fence, we dwell on the type of profile. In this case, one of the main characteristics is the wave height and its shape. As fences most often use products labeled "C" or "CH". The height of the corrugation is marked with digital symbols, from 8 to 25 millimeters. Large dimensions of the corrugation cause a smaller size of the working plane. For grades C8 and C10, the optimal width will be 1150 mm, for other modifications - no more than 1100 mm.

The strength and stiffness of the sheet depend on the shape of the corrugation. The lowest indicator is observed for material of category C8. The configuration is divided into several types, namely:

1. Corrugation is a wave type resembling construction slate in design.
2. Trapezoidal configuration (characterized by increased rigidity).
3. Cassette U-shaped.

The mass of the sheet of the material in question is from 4.5 to 12 kilograms per square meter. This difference is due to a number of characteristics (metal thickness, corrugation height, additional coating).

What corrugated board is better to make a fence from?

Determining the answer to this question, it is necessary to consider the types of coating sheets. Here are a ton of options. Given their features, you can easily choose the best option based on the specific situation. Let's start from the most popular types:

1. Hot dip galvanized processing method. This design is characterized by good corrosion protection of the metal. The amount of zinc should be at least 140 grams per square meter.
2. Alumozinc. A coating similar to the previous version, but significantly superior in strength and durability.
3. Paintwork finish. This form of processing allows you to protect the metal due to the resulting film, and also gives a beautiful appearance to the sheets. However, it is subject to mechanical damage.
4. When choosing which profile for the fence is better from corrugated board, pay attention to the polymer coating. It has a wide range of colors and thickness. Below we consider the varieties of this material.

Polymer coatings

Each of the types of this coating has its advantages and disadvantages:

1. Glossy polyester belongs to the budget category. Its thickness is about 25 microns.
2. The matte analogue is almost identical in composition to the above material, its thickness reaches 35 microns.
3. Plastisol refers to decorative polymers. The material includes PVC and plasticizers. The thickness of this option is 200 microns. The coating is resistant to weathering and mechanical stress. The surface structure can be performed with a texture pattern under the skin or with a stroke resembling a birch bark. The coating has its own properties, color palette and standard thickness.
4. Pural. Pay attention to this material, because, being interested in what thickness of corrugated board it is better to choose a fence, many people think that the thicker the sheet, the better. The considered polyurethane coating, although it has a thickness of 50 microns, is characterized by high strength and resistance to aggressive influences of any type.
5. PDF (PDF). This material consists of 80 percent polyvinyl chloride and 20 parts acrylic. The coating is tolerant to temperature extremes, does not fade, and is optimally suited for installation on sea coasts.
6. "Printek" (Printech). An innovative type of polymer that mimics various natural materials, including wood or stone. It is coated by offset printing, the thickness is up to 35 microns, resistant to salt, thermal and acid influences.

Rack Selection

What pipes are better for a fence from corrugated board? Specialists recommend using two types of racks. As vertical supports, pipes of profile or round section are suitable. For logs, elements of the profile type with a rectangular or square cut are mainly used.

From this it follows that for the type of fence under consideration two types of rolled metal pipes are needed. This makes it possible to save on the purchase of expensive cross-sectional analogues. It is worth noting that vertical racks should have an increased diameter, and thin options are suitable for horizontal floors.

Rack Dimensions

Vertical supports are recommended to be selected with a size of 60 millimeters in diameter. If the height of the fence exceeds 2 meters, this value increases to 80 mm. A round pipe due to the high price for racks is used extremely rarely. Most often, profile analogues with a cross section of 60 * 40 mm or 80 * 60 mm are used.

The total length of the vertical supports is determined taking into account the height of the structure. To the total value plus 30 percent of the underground part. The number of pillars is calculated based on the total perimeter, approximately two elements per meter. As a log, only a profile pipe is used. Such elements are much more convenient when installing horizontal ceilings. In addition, the fixing of the metal profile sheets themselves is facilitated. The lag size is 40 * 20 mm.

Installation Features

Below are the mounting options for racks for the fence from corrugated board:

1. In the first embodiment, the support is driven into the ground by a third of the length of the rack. This method is fraught with the possibility of deviation of the column from the vertical.
2. The bored method consists in immersion of a rack in the reamed nest. The support is fixed by filling the mines with cement mortar. This installation method is very reliable, but it requires a significant amount of time.
3. Printed version. The column is fixed in the nest with sand and gravel.
4. The screw version resembles the method of installing piles. The design is screwed into the ground as a self-tapping screw.

In conclusion, it can be noted that the fence from corrugated board is a completely reliable and durable construction, characterized by a variety in color and texture.