This cable or accessory is not certified: cause of the problem and solutions

“This cable or accessory is not certified ...” is a message that you may not have encountered personally, but you must have heard about it. We all know how short-lived Apple's original lightining is and how expensive they are. Buying a cable not from the manufacturer is fraught with unpleasant consequences. They are usually found out about them when it turns out to be too late. What to do if you find yourself in a similar situation? How to charge your pet? And why could such an alert occur if everything was okay up to this point?

Why do users buy replicas?

The purpose of buying a cable-copy is understandable - the desire to save. An analogue of Chinese production is cheaper than Apple products. At the same time, a frightening message with the text “This cable or accessory is not certified” sometimes does not immediately appear. Someone may ask: how exactly does the phone recognize that the connected cord is not “native”?

The bottom line is that a special component is installed in this original lightining - a microcontroller. One of its functions is to ensure that the charging and data transfer process can occur regardless of which side you inserted the cable. In Chinese replicas, this microcontroller is most likely missing. Alternatively, it is damaged or simply does not meet the requirements of the phone. Because of this, later problems arise.

What problems may arise from using such a cable?

As you can see, Apple strictly monitors the use of products not of its manufacture. Special devices do not allow charging, a message appears on the screen stating that this cable or accessory is not certified, so its reliability is not guaranteed.

Of course, one of the main reasons for this phenomenon is the monopoly on production. But the representatives themselves call another, no less significant: fake cable is almost guaranteed to cause serious harm to your iPhone. Firstly, if you use the Chinese replica, the "apple" can simply stop charging and connect to the computer. As a rule, at the most inopportune moment. Secondly, the original lightining is designed specifically for the iPhone. Using a fake can damage the apple-tree due to technical mismatch. Then your losses will be much more serious than the cost of buying a new cable.

A simple way that can make a non-original cable work

Suppose a phone that displays a message stating that this cable or accessory is not certified does not charge. What should I do if I cannot find a new wire right now for a replacement, and the phone must be charged? No one gives a 100% guarantee, but sometimes this method helps:

1. To get started, try inserting the cable on the other side.
2. If all else fails and the same message is displayed on the screen, close it.
3. Unlock the phone, after which the notification will pop up again. Close it again.
4. Disconnect the wire, and then immediately insert it again.
5. In some cases, after this, charging starts to occur as usual.

How to charge the device with a copy by turning off the phone?

Another simple option, how you can try to make a non-original cable work:

• Connect the wire to the device. A warning appears on the screen. But you should not pay attention and get the cable.
• Turn off the phone. At the same time, make sure that lightining remains connected.
• If this method is suitable for your phone, the charging process will begin. A disconnected device cannot check the cable and “notice” that it is a copy.

This cable or accessory is not certified: how to get around through jailbreak?

This cable or accessory is not certified ... You can also solve this problem via jailbreak. The algorithm of actions is as follows:

1. Jailbreak your phone.
2. Launch Cydia, where go to the Sources tab.
3. Here you should find the item Support Unsupported Accessories 8. It is this modification that is responsible for activating support for non-original devices.
4. This tweak is absolutely free. Without worries, click Install.
5. After the device is rebooted, the changes made must take effect.

Now, when the charger is connected, the process should occur without problems. Perhaps the message will still appear. However, this will not affect the result.

What to do if the problem with the cord appeared from scratch?

Does the gadget on the screen of which the notification “This cable or accessory is not certified” is displayed not charging? What if yesterday you attached the same cord and everything was fine? And are you sure of the noble origin of your cable? There may be several reasons:

• Over time, any equipment deteriorates. The charger connector may be oxidized or dirty. Perform a visual inspection. Dirt can be removed with any wand, but use sharp iron objects! This will only exacerbate the problem.
• Assess the condition of the wire itself. A message that this cable or accessory is not certified may appear even from the original model if it is damaged. The weakest points are the articulation points. Minor damage can be patched up. But if the shell is seriously broken, there is only one road - to the store.

Now, if the message “This cable or accessory is not certified” appears on the screen, you already know what to do. But it’s better not to skimp. Therefore, it advises you to buy the original lightining. Otherwise, the consequences can be more serious than just a dead phone. Then the iPhone will have to be carried to a service center, which will entail even more expenses than buying an original cable. It’s better to allocate a certain amount and buy the right lace, than then pay twice. By the way, the new cable can be further strengthened. Then it will last much longer.