In each instruction supplied with the TP-Link router, there is an algorithm for setting up network equipment, but not a word about solving connection problems. But without access to the software part of the router, the user will not be able to configure the device.
In this article, the reader will learn how to enter the TP-Link router and its settings. A complete algorithm of actions with a step-by-step solution of emerging problems will be offered. Naturally, to achieve the result, the user will have to use all the recommendations.
First inclusion
If we are talking about a completely new device, only purchased in the store and has never been turned on yet, then the connection performance directly depends on the computer settings. In fact, by connecting the wires correctly, as described in the instructions, the user can easily dock the two devices.
Further technical matter: how to enter the TP-Link router interface is indicated in the same manual. You need to enter the IP address of the network device in the address bar of the browser and specify the login and password during authorization (they are identical - admin). This procedure is simple and does not require any knowledge of information technology from the owner of the router.
Configured Network Equipment
There are situations when a user purchases a second-hand router. Here the situation can be resolved in several ways. Knowing how to log in to the TP-Link router (if the seller changed the factory settings and transmitted the authorization information to the buyer), you can easily do the reprogramming of network equipment for yourself.
But there are situations when the user does not own information about the IP address of the router, as well as about the login and password. The problem is solved simply - you need to reset the network equipment to the factory settings. This is done with a special Reset button, which can be found on the control panel. Further, the connection is made according to the instructions that come with the router. It also describes in detail how to enter the TP-Link router.
Provider Tricks
TP-Link products are quite popular among providers who provide network equipment to their customers for free (of course, the user must connect on a contract basis). Here the situation for the owner is aggravated by the fact that programmers of organizations providing Internet access services very often install their own firmware with their own authorization system. The password, of course, is not shared with anyone.
Before thinking about how to enter the TP-Link modem, the user needs to make sure that his desires are appropriate. In most cases, the router is already configured and provides access both via a wired and wireless channel to the Internet. But there are situations when you need to change the password on Wi-Fi or forward the ports. The problem is solved in several ways. You can ask the provider to change the settings or install the manufacturer’s factory firmware.
Pitfalls in the software update process
It would seem that it could be easier than downloading branded firmware from the manufacturer’s official website and installing it on a router? But there is a problem. The fact is that the user will not be able to access the "Administration" tab in the device control panel. You can hack anything you like - both software and hardware. The question here is different: should this really be done?
How to enter TP-Link router settings without knowing either login or password? In addition, the network device itself has non-standard firmware. Simply. Find out the IP address of the router and force the new firmware into the device using a special utility. True, another question arises here: will the provider give its client settings on the network, having learned that he is using a non-branded device.
The other side of the wire
Thinking about how to log in to the TP-Link router, the user forgets that in addition to problems with the network device, the inoperability can also be caused by the computer not making it “see” the router. The network card of any PC can be in three states: be disconnected, work in static mode or receive an IP address via DHCP. In the latter case, there should not be any problems with connecting the network equipment. But the first two states have to figure it out.
The network adapter can be disabled both hardware and software. If the device is not detected by the operating system, you need to go into the BIOS settings and enable it (or install the driver). And software adapter is enabled through the control panel. When searching for answers to the question of how to access the TP-Link router, the user should not forget about the network settings.
User Intervention
Going to the "Network Control Center", the owner should find the item "Change adapter settings". Next, the desired network connection is selected, and after calling the alternative menu of the selected icon, the user needs to go to the adapter properties. Everything is simple here. In the list of active components, you need to find the IP Version 4 menu and go to its properties.
In the menu that opens, the user needs to cancel the manual network settings by checking the box next to the inscription: “Receive automatically”. You need to do this for both the IP address and DNS. In general, before entering TP-Link WR841N or any other network equipment, it is best to immediately make sure that the computer is configured to automatically obtain the server address and domain name (DNS).
Finally
As can be seen from the review, there is nothing complicated in connecting the router to the computer. Yes, you need to spend more time on unnecessary procedures such as resetting, flashing network equipment or changing the settings of a personal computer. But these are turnkey solutions that will really help any user to solve connection problems.
When wondering how to log in to the TP-Link router, any owner should understand that in most cases (a probability of 99% is guaranteed), the solution to the problem directly depends only on him. And of course, from knowledge that will always help to solve any task.