Working with a personal computer, or even a laptop, sooner or later there is a need to disassemble it. Why is it important? The fact is that someone needs to upgrade RAM, for example. Someone just needs to clean it from dust. In any case, the owner faces the problem of how to disassemble an asus laptop without damaging it inside and out. It is on this example that we will consider disassembling a laptop.
Repairing a computer. Asus disassembly
We detail the disassembly of the Asus K50IJ laptop . Its description will help apply the knowledge gained if opening the Asus K. serial computers is required
The following list of tools is suitable for this:
- a set of two screwdrivers: a thin (asterisk type) and a straight screwdriver.
Nothing more is needed. Now you need to disconnect the device from all batteries, including the battery. To remove it, turn the asus upside down and unscrew the holding clip with a screwdriver.
Now you need to remove the bottom cover. It is held by 4 screw clamps, and they must also be unscrewed in sequence. After that, slide the cover slightly to the edge opposite the battery. The result - you can see the motherboard of your laptop with all its subcomponents. As you can see, it is not very difficult to disassemble an asus laptop with your own hands.
You will now have full access to laptop devices such as a hard drive, a CD drive, and RAM slots. You can also replace the internal battery of the calendar, clock and CMOS read-only memory settings .
Continuing to disconnect the components
So, we learned how to disassemble an asus laptop. What next? It remains to find out the details of the removal of individual components:
- To remove the CD drive, unscrew the screw that secures it and slide it along the guide into the outer hole (push out). Do not forget to do everything carefully;
- To remove the RAM bar , press the plastic bolts with both thumbs. In this case , the memory module rises slightly, and it can easily be removed from the corresponding slot. Do not forget that the contact parts of the module must not be touched with your hands;
- to remove the main cooler, cooling processor, remove the 3 clamps along its edges and carefully disconnect the contact wiring;
- knowledge of how to disassemble an asus laptop allows you to remove the keyboard. To do this, the device must be turned over. Look carefully at the special gate valves near the monitor. Take a small sharp screwdriver and carefully press them until the keyboard rises. Now it can be placed on the arm. It remains only to pull out the cable between the system board and the keyboard. To do this, slightly shift the two mounting latches on the board. In this state, it is not difficult to disconnect the cable carefully.
Remember also that the assembly order is usually the reverse of the disassembly process. Despite the fact that you have learned how to disassemble your asus laptop with your own hands, do not apply these skills unless absolutely necessary. If you are not going to upgrade the laptop, clean it from dust or are not sure of your actions, it is better to leave it as it is and consult a specialist. If you have repeatedly faced similar tasks, and the screwdriver, as they say, does not fall out of trembling hands, you can safely proceed to disassembly.
Blowing fan
To blow dust from the main or auxiliary fans, you can use a hairdryer with a stream of cold air. Keeping it a short distance from the cooler, just direct the air by blowing dust. The same can be done with the keyboard, but first it is recommended to shake it from dust and crumbs manually.
Dry cleaning of the laptop (without vacuum cleaner)
Gently wipe off any dust deposits on the case itself or on individual parts of the laptop. It is best to use a soft, dry, lint-free cloth.