Before disassembling an Acer laptop , it is important to remember that there is a guarantee for all the units of this manufacturer for a certain time. If the laptop is disassembled before warranty repair, then all responsibility for such actions will be assigned to the person who disassembled. In order to disassemble the Acer laptop, you need to prepare the following tools:
- screwdrivers (flat, cross and flat plastic);
- plastic tweezers;
- grounding bracelet.
Before disassembling an Acer Aspire laptop, you need to understand that there are a lot of different-sized screws in the design. The masters, disassembling such units, are guided by an invariable rule: put each bolt directly next to the component for which it is intended. Getting started, you need to turn off the laptop from the network. It is also necessary to separate all the cables and remove the battery.
Dismantling is carried out only relative to the bottom of the unit. The monitor should never be disassembled, because such work can only be done in the factory. If the monitor is defective, then replace it entirely. This is a modular replacement, the design is hardly repairable. When wondering how to disassemble an Acer laptop, many users believe that computer systems are somewhat similar to television systems, but laptops are thinner devices. First of all, the battery is removed from the laptop. Following him is a stub of memory cards. Then you need to unscrew the bolt and remove the optical drive module.
The drive module must be disassembled. To do this, remove the holder and pad. This leaves two bolts that must be placed next to the module so as not to lose. Those who don’t know how to disassemble the Acer laptop need to remember this sequence of actions. After the optical drive is removed, you can proceed to further disassembly.
The cover of the system unit in the laptop is fastened with two screws. It is time to remove it using a screwdriver. Under the cover you will find a hard drive, a wireless network card and a memory card. The next step is to remove the 3G module. Having unscrewed the screw from the cover, it is necessary to lift it and disconnect the module. Next, you need to remove the memory module. If there are two modules, then both must be removed.
If the analysis is the first time, it is better to record the process or memorize. Remembering how to disassemble the Acer laptop, you can then easily assemble it in the reverse order. Now you need to disassemble the wireless LAN card by disconnecting the antenna cable. The board is screwed with two screws that need to be removed. It remains only to disconnect the board itself, and you can proceed to the hard drive. The module detaches quite easily. For its removal, there is a special label, pulling it, you can easily pull it out, disconnecting from the motherboard. The disc is removed with the holder, to which it is screwed with four screws.
Knowing how to disassemble an Acer laptop, you must also follow a number of rules, especially when it comes to the motherboard and drive. It is not necessary to apply great force to these modules, otherwise you can easily damage the system. It's time to remove the keyboard. It is fixed on top of the latches. Having unfastened them, it is necessary to bend the keyboard and remove it. The loop of the device to be removed will be visible. To do this, disconnect it from the motherboard.
After that, proceed to the top panel. It is mounted on 4 screws in the area of the battery recess and 11 on the bottom. Having unscrewed each, it is necessary to carefully remove the panel. To do this, you still have to carefully disconnect the motherboard cables by lifting the clips. At this stage, you can already detach the top of the housing from the bottom. Now it remains only to remove the components one after another, the most difficult work behind. Before you disassemble your Acer laptop in two, you need to determine if there is room in order to decompose all the components. Otherwise, they may get lost. From the top part are removed: speakers, power supply, touchpad, board for reading memory cards, USB - board, Bluetooth module. Following is removed the motherboard. It is important to remember that it is completely impossible to remove it.