In the village, the cow has always been called the nurse. Hard work during the preparation of feed, early ascents on milking, sleepless nights with difficult calving could not force the owner to abandon profitable cattle. The milk sold helped support the cow and feed the owner's family. The farmer’s income directly depends on the milk yield, and it can be increased.
To increase the amount of milk, you need to ration the diet and take good care of livestock. Helps increase the profitability of the content of the cow and the use of the milking machine.
The benefits of milking the machine
Farmers using manual milking experience pollution and high levels of microorganisms in milk. This is due to the non-sterility of the process and the possibility of dust entering the bucket from the stomach of the cow or particles of litter. With hardware milking, the product is cleaner than with manual milking. According to the results of laboratory tests, contamination in milk decreases, it is stored longer and does not turn sour.
Hardware milking protects the health of farm employees and the money of its owner. With the manual method, after a few years, the workers begin to suffer from pains in the hands, deep cracks appear on the palms. The milkmaid copes worse with her duties, is often asked to go to the clinic and causes a loss to the farmer.
On cows, milking is positively reflected by the hardware method: the rate of milk flow increases and the udder is completely emptied faster. Machine milking simulates calf sucking, so the cow does not experience discomfort. Soft ripple does not injure the udder, does not leave scratches or wounds. Veterinarians have repeatedly noted a decrease in the incidence of livestock mastitis during the transition of the economy to machine milking.
AID-2 milking machines for goats and cows
Under the name AID-2, milking machines for goats and cows are produced. They are designed to help owners of private farmsteads and small farms. The principle of operation of this equipment is based on a variable pulsation created by a vacuum pump.
The AID-2 milking machine for goats has smaller teatcups. The development took into account the greater sensitivity of the udder and the smaller volume of milk produced in comparison with cattle. AID-2 devices reduce the likelihood of mastitis in goats, increase milk yield, and increase the comfort of milking. Also, these units can be used for keeping sheep, mares and camels.
According to farmers, the unit does not make a lot of noise during work, so it does not scare animals. The milking machine was created taking into account the physiology of cattle, it reduces stress during emptying of the udder and reduces the likelihood of mastitis.
Assembly of the milking machine AID-2
Before starting work, check the availability of all equipment. Assemble the mechanism according to the instructions and fix the vacuum gauge to the installation. Secure the handle with bolts on the platform. Fill the grease fitting to the working level. Combine milking equipment and vacuum unit. After that, the unit can be connected to a source of electricity.
Assembly of the AID-2 milking machine is straightforward; even an inexperienced farmer will cope with it. Next, adjust the vacuum to operating power and check for extraneous suction. Rinse the machine with water and start milking the cow.
Instruction manual
Wash with warm water, wipe off and proceed to a light massage. Open the valve and place the glasses on the nipples, starting at the farthest from you. Be convinced of reliability of fixing and proceed to milking. In the process, observe the flow of milk into the hoses and, if necessary, change the vacuum pressure.
Milking a cow is recommended according to the regimen, 2-3 times a day at the same time. For a good milk yield, be sure to massage the udder. Before you start working with the device, squeeze a trickle from each nipple into a special container. Only after completing all the procedures, connect the AID-2.
During the operation of the device, monitor the milk flow, after 4-5 minutes, pull the collector forward and down to finish. After remove all glasses. Grease the nipples with cream.
For perfect operation, the AID-2 milking machine should be correctly operated, the instructions for which are issued by the manufacturer.
Features
Farmers like the AID-2 milking machine, the feedback on its work is positive. The device allows you to serve up to 7 cows per hour. Full machine extrusion prevents the incidence of mastitis, this allows to reduce the cost of veterinary care.
The device has convenient overall dimensions. Light weight makes it easy for farm workers to cope with it. Like most Russian milking machines, AID-2 is equipped with a push-pull vacuum. Variable ripple causes faster and more efficient emptying of the udder.
AID-2 milking machine can significantly simplify the life of the farmer, increase milk production on the farm and ensure stable profit growth.