For over a century, humanity has been widely consuming electricity. Countless devices of all kinds have been produced. However, no one thinks about their safety.
Over the past decade, the number of pathologies of the human body, the treatment of which is not subject to medicine, has increased. The reason is often not so much a poor environmental situation as a lack of understanding of the processes in all devices that operate on the basis of the phenomenon of electromagnetism.
If we touch on physical processes, then in nature they proceed in accordance with the law of conservation of momentum. In simple terms, the execution of an action is impossible without a fulcrum, and during its execution, the object and support receive equal mechanical impact. If we look at this problem through the prism of vortex processes, it turns out that when creating electromagnetic radiation, the electrostatic plane is taken as the basis.
The Mishina therapeutic coil, reviews of which indicate that it has a high degree of functionality, provides vortex processes. They have a healing effect.
What destroy the radiation of electricity?
Our life is full of continuous ripples emanating from electrical devices. They have a destructive effect at the molecular level. As a result, increased energy saturation of the molecules is caused, which leads to the formation of large clusters. Many looped structures of the molecules of the human body cannot be treated with medications due to their high level of strength. Such formations in the body entail the appearance of cancer or block any functions in the body.
The most unified way is to create a zone with a low density of the medium using electrostatic implosive resonance. Such an effect is provided by the Mishina healing coil.
The essence of her work is actually built on gravity. True, the range of the device is small. It is only 2-3 meters. The level of transmitted power of such equipment depends on the degree of voltage. The amplifier for the Mishin coil has a voltage frequency of 12-24 volts at the output. The current indicator should not exceed 100-200mA.
The principles of manufacturing a flat coil (DMA)
How to make such a device, like a Mishin coil, with your own hands? Preliminary production of the base is required, on which double-sided tape should be glued. A round ledge is installed in the center. Its diameter is 25 mm. Around it, the laying of two wires begins, which should lie parallel to the plane of the base.
The generator for the Mishina healing coil can be a standard configuration. Its power is quite enough for recreational purposes. The generator circuit for the Mishin coil is presented below.
After the manufacture of such a device, a container is obtained on the basis of a pair of spiral-shaped plates that are embedded in each other. It is possible to use any copper wire, the diameter of which together with the insulation will be no more than 1.5 mm. The diameter of the coil should not be more than 23-25 ​​cm. The wire is fixed on top. You can fix it with adhesive tape.
Misha’s coil, the circuit of which is not so complicated, can very well be assembled independently. Materials for its manufacture are easy to get at any electrical appliance store.
How to set the coil on an oscilloscope?
Mishin’s vortex coil needs to be determined by frequency. For this purpose, a pair of taps are made from the device. You should take the end of one wire from the inside of the coil, and the other end from the outside. In this case, the circuit remains open, and the two terminals of unused plates should be cut off.
When using a standard-type generator with a power of 2 W, it is possible to determine the frequency of the device by connecting the oscilloscope probe parallel to the generator terminals. The frequency of the generator is gradually increasing. The first frequency is determined at which the generator output voltage is lower. This will be an indicator of the operating frequency of this device.
The second option for measuring voltage
Also, the device can be measured using a 10 m resistor that is connected in series to the power circuit . The highest amplitude value should be determined. This method makes it possible to assess the quality level of the supplied sine in the load mode in the tank.
How to configure the LED indicator?
You can determine the operating frequency of the capacitance by means of an indicator coil. It is an induction device in which two oncoming LEDs are included.
With this method, you can find the frequency by the maximum indicator of the luminosity of the LEDs. The generator voltage in this case decreases. This provides a reduction in the frequency range at which a glow is observed.
Effective Coil Frequency Index
If you provide a secure fastening of the wire and not subject the device to severe mechanical deformation, then after setting the optimal frequency of the power supply of the tank, the indicator of its frequency will not change during use. For the capacitance design presented above, the average frequency is 310 kHz. Moreover, the indicator of the effective frequency range of the supply signal lies within ± 10 kHz relative to the operating frequency.
Such a device has a wide electrostatic spectrum and a low gradient of a plane change to the center of the device during operation. This will effectively affect the central nervous system, eliminate circulatory disorders and many other vortex problems in the body.
Features of the design of a flat coil with a diameter of 12 cm
A higher level of impact on pathogenic formations is possessed by Mishin's healing coils with a reduced distance between the plates. For example, you can use a wire with a cross section of 0.5 mm in varnish insulation. The length of each wire will be 10-12 meters.
The internal diameter will also be approximately 25 mm, and the external - 130 mm. This capacity has a high level of efficiency. It can affect the smallest viruses, fungi, eliminate scars and accelerate the process of tissue regeneration.
Torus configuration features (TMA, bagel)
A subsequent decrease in the cross section of the wire and the total size of the coil will lead to the creation of an even more effective version of the vortex capacity. With an outer diameter of 51 mm and an inner diameter of 25 mm, a wire thickness of about 0.1 mm is created.
Such a device is difficult to make with your hands. Therefore, it is recommended to use a simplified version of the manufacture of the device in the form of a torus.
Torus making
To make a torus, you will need about 15 meters of twisted pair cable (UTP 5E). The wire includes four or eight cores that are twisted in pairs. Remove the outer cable insulation and separate one pair from the rest.
To create such a capacity, you can use almost all types of wires. The only condition is that the distance between the wires over the entire length should be the same. Therefore, twisted pair fits perfectly.
Next, apply a piece of electric corrugation. It will become the basis for creating equipment for bobbin winding. The diameter of the corrugation should be 25 mm. It should be bent into a torus of the required size. A slot is made on the outside. It is fixed by a pair of turns of insulating tape.
Such winding will ensure the correct formation of vortices. In this case, the formation of a whole spectrum of frequencies occurs, where the inner part of the winding is responsible for high performance, and the external for low.
Before proceeding to winding, the inner lead of the wire should be threaded into a pre-prepared hole in the corrugation, and after winding, fix the external leads. To fix the winding, it is necessary to remove the corrugation in parts. The twisted pair conclusions are untwisted, and the unused ones are bit off
Determining the device power frequency
Next, determine the frequency of supply of the torus. Connection of the generator terminal must be carried out from different sides on the device wires. To determine the voltage at the output, the oscilloscope probes are connected directly to the generator terminals.
Then the first indicator of the frequency of the maximum voltage reduction relative to the input is determined. In other words, the frequency of the maximum conductivity of the capacitance should be indicated. Further nutrition will take place at this rate.
Coil Power
The coils are powered by a sine (signal from the generator). Power supply through pulses is unacceptable, since it does not have inertia in this mode. The frequency range with high efficiency for the tori is the same as for the coils of a flat configuration. It is 270-380 kHz.
During the operation of the device, the supply voltage coming from the generator can sink up to ten times or more. At the same time, the indicator of the total activity of the power supply can be no higher than 0.1 W. The maximum conductive current power should be limited to 200 mA, and the voltage indicator to 22-24 V.
If these parameters are overestimated, then this can lead to electrostatic breakdowns, which will be expressed in discharges from the center of the coil.
What generators to use?
A frequently used generator for the Mishin coil is TGS-3. It has automated resonance tuning.
A more professional analogue is the model ATTEN ATF20B +. Its advantages include a display, USB interface, frequency counter, power amplifier, waveform. Such a generator for Misha’s coil emits a signal that is not subject to distortion.
Coil Treatment Misha
So, having prepared a device of the simplest configuration in the form of an inductive coil, it is possible to have a therapeutic effect on any problem areas of living organisms. In most cases, knowledge of diseased points in the body is not necessary at all, since electrostatics automatically affects painful volumetric structures and contributes to their separation.
What is vortex medicine based on? Mishin's coils provide a natural application of energy from the medium in order to influence the problems encountered in the carbon form of life. This method is equivalent to the effect of antibiotics, and also serves as a replacement for operations to remove cancerous tumors. The vortex currents created by the coil will easily restore the affected nerve cells.
What did the fixture tests show?
What potential does the Mishin coil have? Her treatment gives good results. Tests that have been carried out over the course of several months have revealed a high level of efficiency of using electrostatic capacitance to restore lost body functions. The duration of one session, depending on the disease, ranged from 5 minutes to an hour.
Features of the treatment of certain diseases
Misha's coil causes the release of a large number of toxins, which must be excreted by the kidneys through urine. To cope with so many harmful substances when using a coil is not an easy task. Therefore, treatment begins with the lumbar.
For the usual regimen of body cleansing, sessions lasting 30-40 minutes will be sufficient. They should be carried out during the first five days. The coil is applied to the lumbar region and chest. At the same time, the loin is the most important area of ​​influence during treatment, as the kidneys are cleansed. These organs, according to statistics, have half of people heavily clogged.
The first week of treatment contributes to a significant cleansing of the body. The immunity works in an enhanced mode, tissue regeneration begins.
The duration of the sessions held in the second week can be increased to 60-90 minutes. This is an average. Much depends on the particular case and disease.
For example, kidney treatment should be carried out with sessions lasting half an hour. If after the procedure, the patient complains of feeling unwell, weakness, chills, fever, pain, then Mishina’s coil began to affect. If a person is able to endure the ailment, then a similar session is held the next day. If you feel very poor, then treatment is recommended to be postponed for two days.
Each person is able to determine what intensity of exposure he needs to heal. The patient selects the duration of the session individually.
At obese people, the coil at first may have little effect. Electrostatics has a certain charge, consumed as the digestion of slags in the body. It contributes to the destruction of looped formations. During the next session, not meeting any obstacles in its path, electrostatics penetrates even deeper and copes with the disease. Cellular formation, as a rule, is in the fatty layer. That is why plump people need a longer period for treatment. Typically, such patients do not feel any results from the sessions during the first five days.
The right choice of mode
After the Mishin coil begins to act, it is necessary to determine whether this mode is right for you, whether it is worth adding exposure time, or should reduce it. If you are on vacation, then you can resort to carrying out daily procedures of long duration. So you can cleanse your body as soon as possible. You can apply a more gentle mode, conducting short sessions. This intensity is applicable to people who do not have any serious illnesses in acute form that require urgent treatment.
A local disease, for example, pain in the knees or migraine, can be affected by another device - a torus. Such a bagel has a point effect and is perfect for these purposes. The diameter of the device is approximately 10 cm.
Features of the coil
There are nuances in the operation of the coil, which are difficult to explain.
For example, the coil continues to work even in the off state. Only an indicator of its functionality in this case is 20%. In addition, the impact extends not only to the person to whose body the coil is attached, but also to people who are at a distance of 3-7 meters from it.
Many are interested in how long it is possible to use such a device as the Mishin coil. Treatment should be suspended after ridding the body of all toxins, since the device ceases to affect the body. You can apply a coil to the body throughout the day, but there will be no effect from this. This is what will become an indicator that you have improved your health.
Coil Patient Reviews
Misha’s coil, the most positive reviews about it, helped many people get rid of serious ailments. According to one patient, through a coil, she was able to cope with a disease such as chronic renal failure. Such a coil was made to her by her husband with her own hands.
Renal failure often causes the death of young people and even children. Every year the number of cases steadily increases. The disease cannot be cured with medication. Only kidney transplantation or dialysis helps. The mentioned woman held sessions for a month, taking small breaks.
What else helped the coil Mishina? The reviews of another patient indicate that within one month he was able to cope with the migraines tormenting him.
The device is applicable for very serious diseases. Does the Mishin coil help with tumors? According to another patient, the device saved her from seals of oncological nature under the armpits. After using the coil, the woman stopped suffering pain.
Also, many people note that the coil is very effective for pain in the stomach, swelling of the legs, fatigue in the back.
How is the coil rated? Alexander Mishin, according to many, created a real miracle. One can only thank the inventor of the device for its selflessness.
Can side effects occur?
The fight against many chronic diseases can cause their short-term aggravation. This is not to be feared. If the disease sits deep in the body, then it will gradually punch the way out.
The healing coils of Alexander Mishin can cause a short increase in body temperature, which will be observed up to 3 days. Drawing muscles in the muscles may also be noted.After the interaction of statics and the body, many toxins that are contained in the body penetrate the blood. This can cause high blood pressure and drowsiness. It should be given to the body to cope with the disease. However, it is not recommended to overload it. In this case, a dream is shown, which will only help in the treatment.
Statics are not harmful to cells
After curing the underlying disease, the body practically ceases to respond to electrostatic effects, since there are no more looped structures.
Further use of the coils is justified if the symptoms of the disease have resumed. Then the session should last 20 minutes. This will be enough to stop the problem.
To harm healthy body cells through this method is possible only if the coil sends high power pulsations of the power source. Therefore, it is necessary to use a sine generator for the Mishin coil. He will be able to protect the body from excessive exposure to vortex flows.
The effect of coils on plants
Where else is vortex medicine applicable? Misha coils help animals and plants. A number of experiments showed that when the device affects indoor plants, their intensive growth is observed, as well as the rapid germination of seeds.
How safe is this treatment?
Subject to a number of standards, treatment will be safe. Even if they are overstated, the risk coefficient will be 10%, which is a rather low indicator. It is safe to say that this treatment method does not pose any health risks.
How can you imagine the action of a coil?
The Mishina healing coil emits waves connected to a sphere. In its center, a space is formed with a depth equal to the height of the sphere. The closest wave located to the center and near the exit has the greatest power. If we talk about the intensity of the wave, then near the center and at the exit it will have a power of 100%, and in the middle - 70%. An exchange is performed between the two exits, as a result of which the disease recedes. If the body suffers from many diseases, then the power for their destruction is not enough. In the case of using a torus, the effect is more intense.
How to apply a disk or torus to the body?
How to attach a coil to the body does not matter much, except for treating the head. The device is applied to the head area in such a way that if you look at it from above, then the winding should be directed counterclockwise. For plants, the clockwise winding direction is suitable.
Conclusion
The Misha coil, reviews of which are favorable, is a vortex device. It is used to cure diseases of varying severity. She even helped some fight a cancerous tumor.