Practice shows that when laying sewage systems, 110 mm pipes are most popular. These products go to the installation of various parts of the pipeline. The connector for connecting the toilet to the sewer has just such a diameter that can be said about some of the taps of bathrooms and showers. In general, sewer pipes are made of different materials today, namely:
- plastic;
- ceramics;
- concrete;
- metal;
- asbestos.
What pipes should you pay attention to
Among the pipes with the same diameter, the main competitors are plastic and metal. But the first ones are being squeezed out of the market by metal products, because PVC has many advantages. Firstly, they are corrosion resistant. Secondly, they are not afraid of alkalis and acids. Thirdly, they have low weight. They are inexpensive, the probability of blockages is much less, because the inner surface is very smooth.
The material is resistant to high temperature, products made of it are easy to install, and the pipes themselves have an aesthetic appearance and do not require painting. There are a lot of advantages of plastic pipes, so their popularity is constantly growing. The only negative should be considered the fear of frost. When exposed to low temperatures, products can change their sizes and burst. Therefore, they are recommended to be used for internal installation, whereas for external installation, the system needs to be insulated.
Specifications
A rather important parameter when choosing is the size of the sewer pipe. 110 mm is the diameter that you should pay attention to when buying. However, there are other operational properties that are important to the consumer. Among others, strength should be highlighted. If you have a corrugated pipe in front of you, then it consists of three layers and can be stacked to a depth of up to 8 m. Temperature limits of operation vary from + 65 to - 10 ˚. The internal pressure that the pipe can withstand is equal to the limit of 6 to 16 bar. The final value depends on the wall thickness and construction.
Tensile strength
Considering the dimensions of the sewer pipe at 110 mm, you should also pay attention to other characteristics. Among them, the tensile strength at break should be highlighted. It is 50 MPa. The specific gravity of such products is 2 kg / p. m. It depends on the wall thickness and diameter. You may be interested in more operational dates. Use such a pipe can be up to 50 years.
Dimensions
Pipe sizes are subject to technical specifications. If you have a 110 mm pipe in front of you, then you can use it when laying pressure-free networks. The length of such products can vary from 500 to 6000 mm. The outer diameter is 110 mm. You should also be interested in the other dimensions of PVC sewer pipes 110 mm. This also includes the internal diameter, which in the described case is 103.6 mm. The wall thickness remains unchanged, it is 3.2 mm.
Among the dimensions of the sewer pipe by 110 mm, the length of the socket should also be distinguished. It can be normal or elongated. In the first case, the length is 58 mm, in the second - 313 mm. Weight depends on diameter. For example, one running meter of a pipe will have a mass within 1 kg.
What to look for when choosing
When choosing the described product, pay attention to the wall thickness. This parameter will depend on the installation location. For external sewage, a greater thickness is required. Otherwise, the pipe will not be able to withstand ground pressure and temperature extremes. In order to increase frost resistance, manufacturers often use a multilayer pipe, which can have two or three layers. The space between the layers is filled with foam. The product ultimately takes the name of a sandwich. All this increases the strength and resistance to low temperatures, but increases the cost of the product.
Considering other sizes of PVC sewer pipes at 110 mm, you should pay attention to the wall thickness. When laying internal networks, products with a smaller thickness are suitable. This is due to the fact that the system in this case is not subjected to critical loads. Some craftsmen, trying to improve the functionality of the pipeline, mount pipes with a larger wall thickness in those places where this is not necessary. This is impractical and can only entail additional costs.
Reviews of sewer pipe made of other polymers
The dimensions of the bell of the sewer pipe at 110 mm, which were mentioned above, this is not all that you should know when buying such products. It is important for the consumer to take into account the fact that not only polyvinyl chloride can be the basis. Along with it, other plastics are also used. According to consumers, the most common is polyethylene PE. It is used only for pipes through which cold water will be transported.
With regard to cross-linked polyethylene, then, according to consumers, it is good because it is resistant to ultraviolet radiation. Such pipes withstand large mechanical loads and have a fairly high temperature threshold. You can use such products at temperatures up to + 95 ° C. The connection is carried out by soldering, and pipes made of cross-linked polyethylene can be used to transport hot and cold water.
The dimensions of the plastic sewer pipe at 110 mm are now known to you. However, it is important to know also what polymer the products are made of. It can be based on PPE polypropylene. Such pipes are widely used in various industries, because, according to customers, they have good mechanical and chemical properties. On sale you can also find pipes made of cross-linked polyethylene called polybutylene PB. Such products are not durable enough, therefore, according to home craftsmen, they are not so popular. The structure has defects, the surface may have delamination and cracks, which appear after several years of operation.
Such pipes are produced in small quantities. Polyvinylidene fluoride PVDF pipes have excellent chemical, physical and mechanical properties. This is a semi-crystalline thermoplastic that is used even in the pharmaceutical industry for pumping drugs. Taking into account all the above, it can be noted that many plastic pipes are in serious competition with classic PVC products, but they have no competitors in terms of cost and quality.
Cost of pipes
The dimensions of the sewer pipe at 110 mm are now known to you. However, before buying, it is important to inquire about the cost. This question is the most interesting part for the consumer. For a pipe with the mentioned diameter, you will have to pay 165 rubles. for one running meter. Prices for PPE pipes will be almost three times higher, although with a larger set of advantages. In this case, we can say that there is an excess of advantages, but whether you pay for them is up to you.
The final sewage price will be calculated with an eye to the installation of the system and sometimes adds unexpected somersaults to the estimate. For an initial assessment, you can take the option of calculating the construction of a sewer in the country. So, for pipes with their laying will have to pay 1,500 rubles. The cost of a drainage well in the composition is 37,000 rubles. This includes two rings, pump installation, concrete and earthwork. Additional costs for laying the system, commissioning, transportation costs, filling the station and soil removal will cost 15,600 rubles.
Characteristics and reviews of the red pipe
The dimensions of the 110 mm red sewer pipe will be the same as those mentioned above. Additionally, it can be mentioned that the length will vary from 1 to 6 m. The wall thickness reaches 14.6 mm. The minimum value is 3.2 mm. Such pipes are fire resistant, they are not able to conduct electric current, which allows not to use additional electrical insulation.
Consumers emphasize that during the operation of such products there is no risk of corrosive decomposition under the influence of liquids or groundwater. The material is resistant to aggressive environments, including solutions of salts, alkalis, acids, gas and oil products. Sewer pipe dimensions of 110 mm are not all that you should know before buying such products. As buyers emphasize, pipes have mechanical strength and stiffness, higher than pipes made of polyethylene. Such products have a low melting point. They are able to maintain performance when heated to + 120 ° C. If this value is exceeded, the form will be lost, gaseous hydrogen chloride will begin to be released, which is harmful to humans.
The first signs of deformation will begin to appear below the mentioned temperature level when heating reaches 65 ° C. It is for this reason that polyvinyl chloride products do not go to the laying of water supply systems with hot water.
Stiffness criteria for red tubes
The price and dimensions of sewer pipes at 110 mm are already known to you. But before buying it is important to ask also what category the product relates to in terms of stiffness. It can be thin-walled light, medium hard or thick-walled hard. The first type belongs to class L and has a stiffness index of 2 kN / m 2 . Thin-walled pipes of medium stiffness belong to class N. In this case, the stiffness parameter is 4 kN / m 2 . The third variety is related to class S, and the stiffness index is 8 kN / m 2 .
Finally
Polyvinyl chloride pipes are made of thermoplastic, which retains its shape after processing. Ethylene acts as the main component of polyvinyl chloride. Additionally, stabilized chlorine should be isolated. Additional additives can achieve the best properties of the described products. Most often, such pipes are used for laying sewer networks. They are easy to install, they have a low cost.