Kama Tractor Plant created a unique model -215, which has no analogues in the Russian market. By operating this tractor, you can replace a number of agricultural machines, which, with modern realities and prices, will keep the business afloat. Tractor KamAZ - best in class. It provides high efficiency with minimal fuel consumption, making it possible to reduce the cost of agricultural products.
Kama Tractor Plant launched this model in mass production in 2007. And soon won the lion's share of the domestic agricultural machinery market. Foreign farmers also showed interest in the XTX-215. For example, large parties coming off the assembly line went to Italy and England. The vast majority of owners say that the tractor has fairly reliable components and assemblies. However, he also has weaknesses. Most often, the transmission fails, which is subjected to enormous loads. Experienced mechanics recommend purchasing spare parts at a relatively low cost in advance. After all, minor repairs are always cheaper than replacing an entire system or unit. In addition, the equipment will not be idle for a long time. Remember that the frequency of breakdowns usually depends on the improper operation of the tractor. Also, the work of special equipment is greatly affected by harsh conditions.
It is highly recommended not to install spare parts of other brands, designed absolutely for other types of equipment. You need to buy only factory spare parts made specifically for the XTX-215 model.
Cabin
Cabin of the KamAZ tractor It boasts a wide viewing angle. The difference from the traditional design is the internal space, which was increased due to the competent redistribution of body stiffness on both cab racks. The doors are wide, hinged. They provide good visibility and easy access to the tractor interior. The interior is made in a modern style, has several colors, which creates a comfortable atmosphere inside the cabin. The driver's seat is mounted on the air suspension, making the workplace as comfortable as possible. The dashboard is digital, well readable. It displays the maximum of useful information that accurately reflects all the parameters of the equipment. High-quality optics allows you to work at any time of the day, providing good lighting.
Hydraulics
Tractor KamAZ Equipped with IVECO engines mounted in a sturdy steel frame. These motors have high torque and a Power Management system, which is extremely necessary during work involving the use of a PTO (power take-off shaft), maintaining a stable operating speed. The chassis base is cast, used to fix the front axle, and is connected to the manual transmission case.
Transmission
Mechanical gearbox of the KamAZ tractor has the following parameters:
- the number of forward speeds - 32, rear - 24;
- reverse - servo + neutral;
- gear oil change - every 1000 hours of engine operation;
- differential of the rear axle - multi-plate clutch in an oil bath;
- turning on / off the PTO - electro-hydraulic.
Attachment
In order to gain control over attachments, remote valves and a three-point attachment must be activated simultaneously. If you need to return the hitch to its original position or completely raise it, then just move the switch. Using the same switch you can enable the option Float (movement on the surface). Absolutely all valves have a vertical position and are located in the rear. The hitch levers are made in full compliance with the ISO standard, with a distance of Cat III N. External balls located at the end of the hooks, size Cat III.
Technical characteristics of the KAMAZ HTX-215 tractor
If we consider this model in more detail, the main characteristics of the KamAZ tractor are as follows:
- engine - IVECO;
- power at 2200 rpm. - 146 l. from;
- engine displacement - 6.7 l;
- maximum torque - 900 Hm;
- marginal fuel consumption - 203 g / kWh;
- the number of gears (forward / backward) - 32 + 24, with a creeper - 48 + 40;
- reverse - a servo with neutral;
- oil change - every 1000 hours of operation;
- rear axle differential - multi-plate clutch;
- turning on / off the PTO - electro-hydraulic;
- angle of rotation of wheels - 55 degrees;
- camber - 6 degrees;
- hydraulic system pump (HS) - closed type, with adjustable flow;
- pump capacity GS - 163 liters per minute;
- GS control - Electronic lower link;
- maximum load capacity of the vehicle - 10.95 tons;
- Category HS - III;
- tractor operating mass - 7.7 tons;
- weight with ballast - 8.6 tons;
- ultimate load on the rear axle - 10.95 tons, on the front - 7.1 tons;
- wheelbase - 2.87 m;
- height - 3.01 m;
- length - 5.3 m;
- width - 2.3 m with standard wings and 2.51 m with extended wings.
Having such characteristics, the KamAZ XTX-215 tractor, the price of which varies from 1.1 to 3 million rubles (in the secondary market), will become an indispensable assistant in agriculture. He will easily cope with even the most difficult types of work.