How to make a cotton candy machine with your own hands

Everyone seems to like cotton candy . However, it is not advisable to purchase an apparatus for its manufacture exclusively for domestic purposes. After all, installation costs a lot of money. However, you can make a cotton candy machine with your own hands.

Is it possible to do it yourself

Almost everyone is able to create a machine for making cotton candy with their own hands. This requires some materials and tools. You will need a large pot, as well as some accessories that can be found in any pantry. With a little effort, you can create an apparatus without spending a dime. Using a home-made device, you can make any amount of goodies at any time.

Necessary parts and tools

So, as already mentioned, to make the apparatus you need a large pot. But that's not all. You also need a special container where sugar will be poured. The container must be made of fire resistant material. After all, sugar will heat up and melt in it. At the same time, the container should rotate and throw out thin cotton threads. Of course, this is not all. So, to create an apparatus for making cotton candy with your own hands, you will need from the tools:

1. A few drills, it is desirable to have very thin on hand - no more than one millimeter in diameter, and a drill.
2. Can opener or scissors for metal.
3. A set of files.
4. Soldering iron.

Parts of the device

Sweet cotton wool, made with your own hands without an apparatus, is unlikely to turn out so airy and light. And to create a device you will need the following components:

1. Jet lighter. A similar device is characterized by a blue flame. A lighter of this type produces heat, the temperature of which is much higher than the heating temperature of conventional lighters. When burning, the device does not emit soot. It should be borne in mind that the lighter should be installed so that it can burn on its own. It will be much more convenient.
2. Power source for electric motor. It could be a regular battery.
3. DC electric motor. The device must be powered by low voltage.
4. Tin can, for example, from under vegetables.
5. Small lid for lighter.
6. Bucket or large pan.
7. Washer, bolt, nut.
8. A rod that exceeds the length of a pot of metal or wood.
9. The tube is 15 centimeters long.

Lighter mount

Let's consider how to create a cotton candy machine with your own hands. First, create a lighter stand. To do this, the device must be wrapped with cling film in two layers. To fix the lighter, mix a small amount of epoxy glue, apply it to the milk cap and stick the lighter. When everything hardens, you need to take the device and remove the film from it. That's all, the lighter stand is ready. It can be removed at any time.

Installation of rod and motor

In order for the finished device for cotton candy, created with your own hands, to work, you need an engine. It can be connected using a short tube or a metal rod with a tin can. It is much more convenient. At the ends of the tube or rod, it is worth making one hole. Each of them has its own purpose. One will serve to connect to the motor shaft. You can fix it with superglue. You can also use the locking screw. In this case, another hole will be required. However, this method allows you to remove the engine if necessary.

The second hole is needed for fastening the can. It is best to fix the container with a bolt. After that, the engine must be mounted on the cross bar. This is done very simply. It is enough to drill two holes in the center of the bar. It is better to fix the engine with two screws.

Preparing a can

So, the machine for cotton candy with your own hands is almost made. The tin can will serve precisely that container in which sugar will be melted. To do this, it is necessary to fill in the product and promote it. A hole should be made along the top edge of the can. The top cover must be completely removed. It is better to clean the edge with a file.

On the sides of the can, you need to make many holes, preferably at the bottom edge. To do this, use drills with a very small diameter, which only exists. One centimeter is better to retreat from the bottom seam, and only then can holes be made.

Set the capacity

In a tin can, you should make a hole for attaching directly to the rod. The container will be fixed with a nut and a bolt. If desired, the jar can simply be soldered to a metal rod or nailed to a wooden plank. However, bolting is the best option, as it allows the replacement of the tank.

The can should be located above the source of fire inside the pot or bucket.

How to make cotton candy

That's all. The do-it-yourself cotton candy machine is fully prepared for use. Using it is quite simple. It is enough to light a lighter, pour a little sugar in a tin can and start the engine. The lighter should be installed inside the pot or bucket.

When the jar warms up, the sugar will begin to melt and scatter through the holes in it, forming cotton candy fibers. After making the right amount of goodies, it remains to collect everything on a bamboo skewer. As you can see, everything is simple.