Plastic windows slowly but surely enter our lives, crowding out their predecessors. With the development of technology, the production of these structures becomes more affordable and faster. Therefore, today every resident of our country can afford the products of the Podolsk window factory. What determines the cost of double-glazed windows, what are plastic windows and how long does the process of their production last? Let us consider right now.
What is a double-glazed window profile?
In fact, this is the basis on which it depends on how well these windows will protect the room from cold and noise. To say that the profile is a normal design would be wrong. In fact, this is a rather complicated engineering structure, especially when it comes to plastic products manufactured by Podolsky Window Factory LLC, which has proven itself in the market.
Profiles are a cavity filled with transverse partitions that give rigidity to the entire window structure. Between these partitions are chambers filled with air, just providing the necessary sound and heat insulation.
For better thermal insulation, a large number of such cavities are necessary. In different profiles, their number may vary. Therefore, the Podolsk window factory offers a wide selection of products for premises for various purposes, which differ in many ways, depending on what characteristics are important to you.
Reinforced thermal protection
In addition to the design of the profile, special gaskets and special glass provide thermal protection. Experts consider plastic windows 58-70 mm wide, three or four-chamber, to be the most suitable for the Russian climate. It should be noted that the company is an official partner of the Rehau concern. A high-quality German profile, on the basis of which plastic structures are created, was developed in the 70s in Europe.
For the installation, installation and operation of PVC windows of the Podolsk window factory, certain parameters are taken into account. In particular, among these requirements is a suitable temperature regime. Its borders: from +55 to -55 degrees Celsius. In fact, all the regions of our country correspond to these conditions, so do not worry about how long window constructions will last for you.
Quality assurance
All products of the company comply with the requirements of GOSTs and have certificates confirming this. Customer reviews of the Podolsk window factory often say that before releasing goods, the technical control department checks each unit of production. In addition, the company gives a guarantee on all types of products and on their installation for 5 years. Throughout the entire warranty period, customers can rely on a free after-sales service, if necessary.
PVC window manufacturing process
An ordinary wooden window does not conceal any secrets. Everything is simple here: the tree is processed, assembled into a single whole and a finished construction is obtained. A good master with all the necessary tools can work out such a window alone in one day. With PVC products of the Podolsk window factory, things are different.
The manufacturing process begins with measurements. A specialist comes and takes measurements from your window niches, talks about the design features, taking into account every little thing. Here you need to discuss all the details, state all your requirements: in which direction should the sash open, which opening system do you prefer, the style of the window, its color. Next is the choice of structural components: pvc profile, fittings, glass. After a thorough study, all the data is transferred to the company, entered into the database and processed, after which the optimal result with all the drawings and the indicated prices is displayed. The buyer only has to wait until the window is completely ready for installation.
First of all, parts of the structure are produced, and then everything is connected into a single whole. This process at the factory is adjusted to automatism thanks to the high-tech equipment of German and Italian manufacturers.
Production stages
The first stage is the production of pvc profiles. According to the order, they acquire the necessary form. If you need relief profiles of a special shape, with an individual coating, then the manufacturing time may slightly increase.
At the same time, double-glazed windows corresponding to this pvc profile are made. The process also depends on the special wishes of the client: properties, the number of glasses in the frame and so on. If you need a double-glazed window with increased thermal insulation, then the specialists of the Podolsk window factory use the so-called IR-glasses, which have special characteristics. The openings between the glasses in this case are filled with inert gas.
At the same time, fittings are selected. Specialists calculate what hardware is necessary to make so that it can withstand the weight of the window, as well as the special wishes of the buyer.
The final stage is assembly. This is not so difficult. Depending on the order, a specialized window sill can be installed. It is worth noting that plastic structures can be installed in any weather. Neither frost, nor heat, nor torrential downpours affect the quality of work. Everything is done quickly and efficiently.
In conclusion, it is worth noting that despite the complexity of the technology and thanks to automated systems, the manufacturing process of products of the Podolsk window factory is fast, which reduces costs without losing quality.
Installation of metal-plastic structures
The advantage of metal-plastic products of the window Podolsky plant has been tested by more than one consumer. This is ease of use, and reliable heat and sound insulation, as well as the safety of people who are indoors. Choosing a high-quality window profile is only half the battle, it is very important to correctly install the window, because its tightness and stability, respectively, and most of the functions, depend on it.
Clients of the Podolsk window factory in the reviews do not recommend installing the window on their own unless you have installation skills with metal-plastic structures. Improper installation can not only impair tightness, but also damage parts of the window.
How is the installation of a metal-plastic window?
The installation of products of the Podolsk window factory can be divided into several stages:
- First of all, a specialist of the company measures the window opening. This can be done independently if there is confidence in the accuracy of measurements. But it is better to entrust it to qualified specialists.
- When the design is ready and delivered to the site, specialists dismantle the old window blocks. It is important to entrust this stage to experienced workers, because damage to the opening during dismantling can lead to difficulties in installing a new window.
- Minor opening defects are repaired and leveled with plaster or putty.
- When installing a new product by the specialists of the Podolsk window factory, first of all, fittings are installed, then double-glazed windows, locks and additional parts. Then the workers finish the window openings.
- The last stage - thorough sealing of the window - for this, a certain part of the space between the structure itself and the opening is blown with foam.