Any, even the most insignificant situation can end unexpectedly. That harmless tea drinking at a laptop sometimes turns into a real disaster, entailing costs. It's about getting moisture in the gadget's case. Well, you never know how it turns out - the children dabbled, set the mug unsuccessfully, staggered - and that’s it, the laptop in the water, panic, and the first thought: what to do?
Primary measures for moisture in the laptop
In any case, if the trouble nevertheless happened, you need to know what to do if you uploaded the laptop keyboard, first of all, and quickly. Why fast? Yes, because water and other liquids are the worst that can happen to equipment. Electricity in contact with water, as you know, gives a very serious short circuit. The result is a “brick” - a burned-out laptop with expensive repairs (if you're lucky).
So, first of all, you should disconnect the equipment from the electrical power. Namely, turn off the “laptop” itself, as well as disconnect the outlet from the network (if connected). It is important to do this very quickly, literally within 5-10 seconds.
After that, you need to quickly remove the battery. So, "first aid" has been provided, now we figure out what to do if the laptop is flooded with tea, coffee. Although in this situation, only sending the gadget for repair to a service center will help. You can’t rub a sticky film with a towel; special solutions are needed.
Disassembling a laptop
Now you can proceed to the second stage - disassembling and removing moisture from the housing. First you need to disconnect all devices - a mouse, flash drives, USB cords, as they can be short-circuited if the laptop keyboard is flooded. What to do next - there are several options. You can disassemble the “laptop” yourself, or you can immediately bring it in for repair.
The first option is more suitable for advanced users who have an idea of how and what is connected inside the case. First you need to unscrew the bottom cover of the laptop to get to the motherboards. When the cover is removed, you can disconnect some equipment, namely the hard drive, memory cards, cooling system. The keyboard is also removed by unscrewing the three screws on the back cover and disconnecting the cable on the motherboard. After that, it is removed in front and opens up a vast space with access to the main motherboards.
An important point - all these actions are relevant if water is spilled. Well, what if I poured a laptop keyboard with a sweet or carbonated drink? You shouldn’t think much here - just go to the service center to see specialists.
Drying the casing and equipment
So, the case is disassembled, now you need to thoroughly dry all the components of the laptop that got moisture. Usually, during such an incident, some keys stop working, so the keyboard will also have to be unscrewed.
It is necessary to take a small dry towel and carefully collect all the moisture in the case, without missing a millimeter. Then, under a disassembled case, you need to lay a dry towel, turn the gadget upside down and leave to dry for at least 24 hours. Separately, wipe and decompose the removed elements. These actions are important if the question is how to save a drenched laptop and minimize the cost of subsequent repairs.
In no case should you try to dry the “laptop” with a hot air dryer. This will further aggravate the situation, since the hair dryer does not dry out the moisture, but simply absorbs it into the circuit boards and equipment. The consequences can be unpredictable.
Assembling a laptop after drying
As already mentioned, the time of final drying should be about a day, after which you can proceed to the assembly of components.
Some do not wait and begin to assemble a laptop literally an hour or two after disassembly. This is clearly not worth doing, because instead of asking what to do if the laptop keyboard is flooded, there will be a problem regarding how to get new parts. Yes, nobody canceled corrosion and burnout.
If the drying time is observed, then there is a good chance that the laptop will work as before. First, all equipment is connected (keyboard, memory sticks, hard drive, cooler, etc.), after which the back cover is put in place.
Now you can connect the battery and start the laptop. And hope that all operations are done correctly, and the technique "comes to life".
The effects of moisture on the laptop
Unfortunately, even if all actions to eliminate moisture from the case and the keyboard were performed in a timely and high-quality manner, no one excludes problems in the future. In particular, despite the external serviceability, after some time, the keys may stop working. Yes, and USB ports are also susceptible to moisture. And there is nothing to be done about it, even if a person knows what to do if he uploaded a laptop keyboard. Step-by-step instructions will only help prevent the worst consequences, but they will not be able to permanently protect the device from damage.
Just in case, let the laptop work, you should take it to a service center. Wizards will be able to identify possible malfunctions, so that in the future they will not be unprepared for damage. Perhaps experts will be able to immediately replace the defective parts - it is still cheaper than buying a new laptop.
Finally…
Well, summing up, it is worth listening to good advice - you should not drink hot, cold and alcoholic drinks near the laptop. Yes, and do not eat over it either. Otherwise, you will have to look for the answer to the question of what to do if the laptop keyboard is flooded, and how to avoid serious consequences.
It’s better to prevent trouble than to spend money and time to eliminate it later.