Among the Soviet sewing machines, the most popular devices manufactured in Podolsk, at a mechanical plant. The sewing machine "The Seagull" is a beloved assistant of our craftswomen. No wonder she earned the trust. This device is reliable and easy to operate. It has a strong aluminum case, "takes" any fabric and is unpretentious in work.
Sewing machine "Seagull". Repair damage
Sewing machine "The Seagull" can serve its owner for several decades. The main thing is to pay attention to damage in a timely manner, to be able to eliminate them and periodically lubricate the mechanisms. The range of devices is quite wide: this is the sewing machine "The Seagull" -134, 132, 132 M, 142 M, 143 and others. Despite the variety of species, operation and repair are carried out for almost all types equally.
Possible breakdowns of "Seagulls" and methods for their elimination
1. During operation, the device skips stitches. To eliminate this problem, it is necessary to check the condition of the needle - it should be smooth and not bent. Inspect the needle before starting work, feeling it with your hand. In case of irregularities, it must be replaced with a new one. It should be borne in mind that only the needle that is suitable for the particular model of the sewing machine is used. The next step is to check whether the needle fits correctly into the plate that is under it. You can return the needle into place by moving the needle bar frame. Another reason for skipping a line is the incorrect placement of the shuttle in a collision with a needle. If it is installed incorrectly, then during operation it will slip by without falling into the loop. To fix the problem, you must fix the shuttle device.
2. The needle breaks during stitching. This happens due to the incorrect location of the carriage cone. To repair the sewing machine "The Seagull", you need to remove the plywood on the side of the device. On the left is the shuttle mechanism, where the carriage is arranged. It is necessary to release it from the latch and turn the flywheel towards you. The sharp top of the carriage should be slightly higher than the eye of the needle and follow alongside it. For proper location, unscrew the two bolts on the axis of rotation of the carriage and carefully push it toward the needle.
3. Stitch defects when stitching. The sewing machine "The Seagull" can give a weak or tight thread during operation. The thread is adjusted using a screw. To do this, it must be pulled or loosened by turning it clockwise or vice versa. If this does not help, then you need to remove the plate on which the screw is mounted, and bend it slightly inward. Other causes of weak stitching may be a breakdown of the upper thread tension adjuster or a loose nut. To fix this problem, open the cover near the regulator and tighten the nut.
4. When the machine is operated, the thread breaks. It is necessary to check the needle plate: it can be deformed, have punctures and irregularities. The carriage may also have burrs. The entire marriage is removed by sanding with sandpaper.
Sewing machine "The Seagull" in many cases is repaired at home, but if the breakdown is serious, you should contact the master for help.