New developments make it possible to produce materials with improved technological properties. The list of such materials included paints. During the repair process, most people are at a loss as to which paint to choose, because it is light and comfortable to use, makes it possible to remove defects on the walls, and also gives the coating a bright shade. This article will discuss the best paint manufacturers in Russia.
What are they made of?
Most often, paints are produced according to the same structure of the components. As practice shows, they consist of:
- Binder composition.
- Pigment.
- Filler.
- Specialized Supplements.
A binder composition is necessary for the formation of a film on the coating. Regarding the pigment, it is worth noting that it plays the role of an element that imparts color. Filler - components that make it possible to save paint manufacturers in Russia on pigment, give the paint a radiance, as well as stability. Specialized additives reduce the speed of drying and hardening, protect coatings from solvents, mold, fungus, and also increase the characteristics of the solution.
Some specialized additives are able to give the material fungicidal parameters, as well as a fire safety property. Considering today's types of paints, a person should know that they contain 8-16 components. The extent to which they are precisely blended and selected is the quality of the composition.
Kinds
Today it’s hard even for an expert to choose paintwork materials, because the list of paint manufacturers in Russia is extensive. In addition, the assortment varies in structure, color and scope. In this case, it will not be superfluous to know about fastidious and ordinary species.
The following features affect today's paint types:
- The content of the binder.
- Type of diluent.
- Scope of use.
- The final result (level of radiance).
- Prop under the paint.
Classification by binder content
According to the content of the binder paint are divided into:
- Oil.
- Silicate and calcareous.
- Alkyd.
- Water emulsion.
- Acrylic
- Silicone
- Polyurethane
- Epoxy
Oil
Oil paint consists of pigment and a binder component, the role of which is played by drying oil. As a pigment, paint manufacturers in Russia use ground flour from minerals that does not break down in water, oil, and home solvents. It is much heavier than the base, which means that it goes to the bottom of the container together with the coloring component. Because of this, before you start painting, it is thoroughly shaken and mixed.
Calcareous
Belong to the category of paints from minerals. Mineral paints are a type of paintwork, where competently crushed materials are used as pigment. The binder component of this paint is hydrated lime (in some cases, powder paint manufacturers in Russia use milk of lime).
In order to increase water resistance during the production of the composition, specialized additives are used: aluminum alum, calcium chloride, and also kitchen salt. Inorganic pigments are used to form lime paint, and light shades are found in the color palette.
Silicate
These paints are designed to work with durable, absorbent surfaces based on minerals (lime, stucco with admixtures of cement, concrete, as well as brick), which do not contain synthetic components, gypsum materials, glue or oil. Surfaces that contain lime are weakened by fluates - a solution of metal salts in water using silicon acid.
Alkyd
This category of paints is made on the basis of alkyd varnishes, fillers, as well as solvents. In addition, the composition has pigments that give a shade. Often factories - manufacturers of paints in Russia add to it a whole list of additives. Among them are antiseptics, the purpose of which is to protect the coating from possible mold and fungus.
Water emulsion
This type of paint has recently gained immense popularity, which is caused by the absence of toxicity, excellent hiding power, as well as a wide range of possible uses. Today this type of paint is the most environmentally friendly facing material. It is worth noting that manufacturers of water-based paint in Russia did everything necessary to use such paint even on staircases.
Acrylic
This type of paint is resistant to frost, it freezes only at a temperature of -40 0 . It is necessary to soften the mixture a little, the process takes an average of a couple of days. The capacity should be taken to a room where the temperature is above zero. Before you start using the paint, it must be stirred and, if necessary, diluted with water. Manufacturers of acrylic paints in Russia say that paint for exterior decoration should dry at a temperature of 18 to 22 degrees. Complete drying occurs within two hours.
Silicone
They are made on a water basis using silicone resin. Paint manufacturers in Russia claim to be innovative technologies in the universe of decorative materials. Silicone paints make it possible to process almost any coating, except for reinforced concrete, because air gets into the base of concrete and promises corrosion of reinforcement. This type of paint has incorporated the best that exists in acrylic and silicate compositions.
Polyurethane and Epoxy
Most commonly used in industry. If the polyurethane composition dries at an incredibly high temperature, then it will be inappropriate to talk about its use in the construction field. Epoxy - a composition of two elements, which is used most often in the industry. In the construction industry, it is used in the process of installing pools or during the repair of enameled bathtubs.
Overview of Russian manufacturers
Considering the production of paints and varnishes in Russia, many domestic consumers, according to their reviews, give preference to imported products. Often, this decision is determined by the established pattern that foreign paint is much more reliable than domestic. But in the Russian Federation there are also manufacturers of paints and varnishes that demonstrate high-quality products.
LLC TPK "Pentan"
One of the leading firms in this industry. It is worth noting that the company is not only engaged in the manufacture of paint and varnish products, but also makes polyethylene, materials for electrical insulation, and also has the capabilities of the petrochemical industry. The company is relatively young since it was established in 2007. The activity of employees and correctly formed management tasks enabled the company to become a leader in paint and varnish products in other areas over a short period of time.
ABC Farben
Since 1995, a plant has been operating located in the Voronezh region, which has been reconstructed and expanded many times. The history of this manufacturer of road paint in Russia (and not only) began with the oil category of PF-115 paints. Today, according to consumer reviews, the company produces a huge assortment of varnishes, coloring solutions, drying oils, enamels for any surfaces.
Workers are systematically trained to enhance experience in Finland and Germany. Each of the workshops has its own laboratory, which monitors the quality of materials and manufactured products. The crisis of 2009 made the leaders of the company determined to change direction to cheaper products and increase the segment of paints of this category.
Buyers note a wide range of ceiling paints, strict quality control and a very pleasant cost of production. Of the minuses emit density, and in some cases the formation of lumps.
CJSC Empils
A large company that was established in 1991 on the basis of chem. factory in Rostov. Now - 100% leader in the manufacture and sale of zinc oxide. In addition, the company is in the forefront of the list of powder paint manufacturers in Russia. Products are made according to innovative technologies, have high quality and 100% environmental safety. This is confirmed by numerous reviews. Materials are delivered to all domestic regions, to the CIS countries and even to European countries. The products are made in several models: “Prosperity”, “Empils”, as well as “Halo”.
NPF "Enamel"
The research industrial company has been on the market for two decades and is included in the list of the best manufacturers of facade paint in Russia. Over this period of time, the organization has come a long way from the formation of ordinary oil-based enamels to the mastery of the production of advanced silicon, organic enamels.
Now the company produces more than 35 types of coatings, including fireproof, facade, resistant to chemistry, as well as organically silicate enamels. The latest equipment makes it possible to produce up to 10 thousand tons of varnishes, enamels and other products per year, which is very pleasing to customers.
Vgt
This Russian association has two plants - in Yaroslavl and the Moscow region. Innovative platforms are equipped according to European standards. The company is engaged in the production of paints, varnishes, putties, as well as enamel products. The catalog shows more than 200 product items. All products are under strict inspection by researchers and are accompanied by conclusions from the sanitary and fire services. Quality certificates are available to all customers on the manufacturer's website. The range is sold in 73 regions of the Russian Federation and imported into six countries abroad.
Buyers note a good choice, the availability of quality documentation and a convenient dealer network. Among the minuses are the sharpness of the smell and a long drying period.
LLC "Tex"
The company was founded in 1994 and is on the list of leaders in the manufacture of coatings in the Russian Federation. Products are in the middle segment of value and have good quality, which gave the company a huge sale of products (more than five thousand points of sale). The manufacturer provides a huge selection of products:
- Antiseptics and varnishes.
- Glues and enamel.
- Putty and paint.
- Primer and more.
Holding company "Pigment"
The company, founded in 1839, manufactured and supplied its own products to the courts of emperors. Now the company is a major manufacturer of chemical compounds in the Russian Federation. Holding is the most difficult structure, which includes all the necessary components: personal research laboratories, subsidiaries, factories, as well as logistics. The company produces varnishes, putties, paints, enamels, hardeners, as well as a primer.
Summary
Recently, it has become a trend to buy products whose brands are known and advanced. And it’s not just that. Large factories, which have many years of experience in the manufacture and sale of paint and varnish materials, are attentive to market demand. Such firms have the means and capabilities to satisfy this demand, and therefore their products are known.
In addition, the key factors are PR and promotion. All of the above firms are one of the leading manufacturers of paints and varnishes in the Russian Federation. Their products have excellent quality, 100% environmental safety, and also comply with all the rules and conditions of GOST.