The AMST 3003 watch setting instructions indicate that the device is equipped with the Japanese Miyota movement, which is characterized by a high strength indicator, resistance to moisture, wide functionality and excellent appearance. Such an accessory perfectly emphasizes the status of the owner.
Description
The AMST 3003 watch tuning instruction states that the strength of the product is ensured by the quality materials used in the manufacture. The body part is made of strong stainless steel, which withstands significant mechanical loads. Mineral glass like scratch-proof is not subject to scratches, protects against moisture dust. Depending on the modification, the element is able to withstand pressure from 3 to 10 atmospheres.
The model under consideration is equipped with a wide additional functionality that includes such options:
- The calendar.
- Alarm clock.
- LED backlight.
- Luminous fluorescent arrows.
- Stopwatch.
Each kit comes with an AMST 3003 clock setting instruction, which allows you to maximize the use of the accessory options and also avoid violations during operation.
Care and wearing
The manufacturer recommends using dry or slightly damp soft wipes to clean the glass and body. It is acceptable to use neutral detergents that do not contain abrasives and solvents. It is necessary to exclude the appearance of glue, oil and alcohol solutions, paints, varnishes, alkalis, acids on the watch. To increase the life of the belt, you should protect it from excessive moisture, dry air, frequent temperature differences, contact with aggressive chemical components.
Instructions for the use of watches "AMST 3003" provides a number of measures to extend the life of the product. These include:
- Protection from prolonged exposure to sunlight.
- Exclusion of mechanical influences, including shocks and falls.
- Do not expose the watch to critically low or high temperatures.
- Store the product in a dry place.
- When worn, the strap should not pull the wrist tight, leaving a noticeable mark.
Watch "AMST 3003": instruction
The instrument is set up to replace the batteries from time to time. Undernutrition is indicated by the lag of the clock hands. Do not be surprised if this happens soon after purchasing the accessory. The fact is that the manufacturer complements the products with test batteries. To replace the battery, you need to open the back cover of the case. This work is best entrusted to a professional.
The user guide for the watch in question indicates the degree of water resistance. Below are these values:
- The three-atmosphere model withstands moisture when washing hands or when it rains.
- Five "atmospheres" of waterproofness allow you to swim and dive to a shallow depth.
- 10 "atmospheres" make it possible to dive under water to a limit not exceeding the same indicator.
- The metal used to create the product is not susceptible to corrosion, does not oxidize and does not rust.
Time setting
The text of the AMST 3003 clock setting instruction states that the exact time should be set using the buttons located on the sides of the case. Manipulations are carried out in the following order:
- To enter the “menu” for setting the time, you need to press three times on the button, which is located below on the left side.
- The choice of minutes is made by a single click on the button located at the bottom right of the case.
- Correction of minutes is performed using the upper right button.
- Then activate the lower right button again to select the clock.
- The final time format is set by fixing the upper right button.
In the watch in question, both 12- and 24-hour modes are available. Its selection is made using the lower left button.
Date and days of the week
The AMST 3003 clock setting instruction presumes the following date setting manipulations:
- Three clicks are made on the lower left button, after which the same number of times is pressed on the key located at the bottom right. After that, a flashing date symbol should appear on the screen.
- The number is adjusted by the upper right button.
- Press the lower right key.
- Set the desired month through the upper knob on the right.
- Activating the lower left button returns the watch to its current operating mode.
- You can view the date by pressing and holding the key located at the top right.
The current day of the week, according to the AMST 3003 clock setting instructions (photo below), is set as follows:
- Three times click on the bottom button on the left, then five times repeat the process with the lower right counterpart.
- The right key at the top makes it possible to adjust the electronic arrow (it will begin to flash in the part indicating the days of the week).
- Fixing information and returning to the operating mode is performed with a single press of the lower button on the left.
- The names of the days are indicated in abbreviated English transcription.
Alarm clock
The sound of the alarm on the watch in question is set in automatic mode. You can disable it by simultaneously holding the two right buttons. The fact that the alarm is turned off will be evidenced by sound. You can return to normal mode after pressing the left button below. Information about the set alarm parameters becomes available after activating and holding the lower right button.
As written in the AMST 3003 watch instructions, the alarm is set in the following order:
- The left lower button is pressed twice.
- The required clock readings are set using the right button on the top.
- The lower right button is activated.
- The exact minutes are adjusted by the upper button on the right.
Additional functionality
The AMST 3003 watch, the instruction for use of which is presented above, has a LED backlight function, which is activated by the upper left button. In stopwatch mode, the device is transferred by pressing the lower left button. It also serves to stop the testimony. Information can be reset by pressing the button located at the bottom right. If a periodic flashing of the stopwatch sector appears, this indicates normal operation of the mechanism and a sufficient battery charge.