Experienced PC users are aware of such a Windows option as Safe Mode. It is necessary in modern operating systems, because the latter are by no means sinless. Errors happen, and sometimes it does not work to fix them. With XP and 7, everything was more or less clear. But with version 10, things got a lot more complicated. The standard input to safe mode was disabled. Now this is not so easy. What caused this decision by the developers is unclear. But the fact that the seventh version was much clearer than the newfangled "ten" is undeniable. However, in the days of XP they said so. So, most likely, users will get used to this "miracle". So how to enter the safe mode of Windows 10? We’ll talk about this.
What is safe mode?
Safe mode is a way to boot the system with only the most important drivers. That is, only those components will be loaded that are necessary for the minimum system performance. No additional codecs, flash and other unnecessary nonsense. This mode is used to correct operating system errors, return to an early state through system recovery. Also, some viruses can only be removed in this way. Therefore, everyone needs to know how to enter the safe mode of Windows 10.
Sometimes from this state of the OS a correction of the "accounting" or local conversion is required. Naturally, to implement this procedure, you need access to the Internet. And here the option "Safe mode with loading network drivers" will help. Users of the "dozens" need to choose this option, because it will not work to fix an account without the Internet. And this again brings us back to the question of how to enter the safe mode of Windows 10.
How to log in if the OS starts?
There are various options for loading the "tens" in safe mode, if everything works fine. The easiest - in the "Start", click on "Shutdown" with the "Shift" held down. Then there will be a proposal to choose the type of download. It remains only to choose the one you need. Also try to “return” the mode to start when you press F8. It will only be necessary to write the desired text in the command line. How to enter the safe mode of Windows 10 through the command line? More about this below.
There is one more option. Enter the "Options" and then - "System Restore." A lot of unnecessary text will appear with the options available. Among others, there will be the items "Restart the computer in safe mode" and "Restart the computer in safe mode with support for network drivers." We select the one that is needed at the moment, and reboot the PC or laptop.
You can try to perform another such procedure. We go to the "Start", select "Run", enter "msconfig" (without quotes). A dialog will appear in which the "Download" tab will be. Among a fair amount of points there will be "Boot Options" and "Safe Mode" with a bunch of options. Here it should be checked. And then just restart your PC.
Use the command line
We go to the "Start", select the item "Command Prompt" and enter the text in the command: "bcdedit / set {default} bootmenupolicy legacy" (without quotes). Then we reboot the machine and press F8. The Windows startup options window will appear. Here we select "Safe Mode". And whether network drivers will be needed - decide for yourself. This is one of the answers to the question of how to enter the safe mode of Windows 10.
A variety of problems are usually resolved through the commander. But in the "top ten" it is best to use Windows Power Shell - a console borrowed from the Linux family of OS. This tool allows you to execute commands as an administrator and works much faster than a standard commander. Yes, and it is more understandable to those who at least once used Ubuntu or Mint. The command line method works on any operating system from Microsoft (except XP). The company from Redmond did something adequate. Honor and praise be to her!
What to do if the OS does not start?
There is only one way. Launch "Windu" in Safe Mode does not work. Therefore, you need a flash drive with the "tens" distribution kit. When loading the installer, you can crank up the feint with the commander and make Windu boot from the HDD in safe mode. You just need to find the inscription "System Restore" in the welcome window of the installer. There will appear a commander, into which we enter the text we already know (without quotes). Now we reboot the PC or laptop. This is one of the answers to the question of how to enter the safe mode of Windows 10 through BIOS.
Many people think that if the operating system does not want to work, then the easiest way to reinstall the OS. On the one hand, this is so - a clean system always works faster. But on the other hand, frequent reinstallations of the operating system are certain death for the hard drive. Not to mention the fact that you need to kill a lot of time to fully configure the system. This does not include the time to install it. Therefore, it is easier to solve all problems that can be fixed using safe mode.
ASUS laptops
There are some nuances here. The fact is that ASUS laptops have a peculiar entrance to the boot menu (media selection at boot). Before performing actions with the commander in the dozens installer, you need to force the laptop to boot from the distribution drive. To do this, just hold Tab at startup and select the type of boot you want. How to enter through safe mode Windows 10? ASUS is the same PC. That is, the method with the commander from the dozens installer also works.
In general, manufacturers of Asus laptops have their own concept of convenience and ergonomics. That is why the engineers moved away from the standard canons and assigned some kind of irresponsible keys for low-level laptop control. Therefore, before trying to change the BIOS settings, you need to carefully read the instructions. Otherwise, your "right and standard" actions can lead to very sad consequences.
Acer laptops
The most problematic in this regard is the laptop E5-731. In order to get into the boot menu of this laptop, you need to do a number of operations. First you need to press Enter to get into the laptop BIOS. Then go to the "Boot priority" tab and select our flash drive with the "dozens" installer. Now be sure to reboot the device. The laptop boots from the drive, not from the HDD. How to enter through safe mode of Windows 10 in Acer E5-731? Using the command in the installer. In the same way as in the previous examples.
With "Acer" everything is somehow incomprehensible. This way to get to drives with distributions was used in ancient system units with processors from AMD and Phoenix BIOS. Why manufacturers decided to choose this particular method is unknown. But in this situation, after manipulating the commander, you will have to return to the BIOS again and prioritize starting from the HDD. And this is completely inconvenient.
Lenovo Notebooks
How to enter through safe mode Windows 10 through BIOS laptops from "Lenovo"? The easiest way here. It is enough to press the F12 button at the start of the device - and the media selection menu will appear. We select the flash drive and boot. And then we proceed according to the already known scenario with the command line and the desired command. Laptops from Lenovo in this regard are the simplest. The Chinese company clearly knows a lot about ergonomics.
In general, Lenovo laptops are in no way inferior to more famous brands in the quality and layout of controls. And in the case of Windows 10, they behave more adequately than other models. There is even an interesting option with Safe Mode for those who use UEFI. It is enough to hold Delete at the start and the launch options will appear. Well, what is not lovely?
Conclusion
Of course, going into safe mode in Windows 7 was much easier. But in the "top ten" he did not go anywhere. The developers just made it less accessible. But with the help of certain commands or actions, it is quite possible to load the operating system in this mode. And after that, you can fix driver errors, the operating system itself and its components. The main thing is to do everything clearly according to the instructions. Then there will be no problems.
If none of the above methods helped to fix system errors, then there are at least two ways. The first is to reinstall the entire OS. This advice is not without common sense, since the fresh "Windows" is always better and faster. If you don’t know how to install, or if you don’t have free time, then there is only one way out - to bring your laptop or PC to the professionals in the workshop. They will do everything quickly and painlessly. But it will cost money.