Although in modern realities almost everyone installs operating systems using a USB drive, there is a certain category of users who still prefer drives. There can be many reasons for this choice: an old PC (which does not support bootable flash drives), the presence of a licensed Windows disk, and more. As long as the drives exist, you'll have to put up with this. Therefore, the question of how to install Windows 7 from a disk is still popular. And you need to give an answer to it.
What to consider before starting the installation?
This is absolutely necessary to know, since preliminary preparation will help to eliminate difficulties that may arise after the installation of the operating system. Before installing Windows 7 from a disk via BIOS, you need to decide on the partition on which the OS will be installed. Usually it is a system drive C. It is also necessary to stock up on the latest drivers for your computer or laptop. It is worth noting that some laptops are equipped with Wi-Fi adapters such that Windows simply do not detect them out of the box. It is necessary to attend to these drivers first. You also need to stock up on installation media. If you have a licensed disk with Windows from Microsoft - that's good. But if not, you need to know how to make it.
Image and media preparation
First you need to download the image with the operating system distribution. On torrents there are a huge number of assemblies of the "seven" with various features. You need to download one of them. Now let's decide on the utility for burning discs. It is best to use Ashampoo Burn, Ultra ISO or something equivalent. It is recommended to record the operating system on a DVD-R disc using the minimum recording speed and the included image integrity check. This way you can avoid unnecessary errors during installation. After the system has finished writing to disk, you can start archiving the necessary data and move on to the question of how to install Windows 7 from disk.
Preparation and BIOS setup
This is an absolutely necessary step, since before installing any operating system it is recommended to reset the BIOS to standard settings. In addition, older motherboards do not have the so-called “Boot Menu”, which appears in newer models when you press the corresponding key. In older computers, you have to manually set the boot order of the PC and reboot the machine. But let's move on to the question of how to install Windows 7 from disk. BIOS plays an important role (if not a key role) in this process. If its settings are incorrect, then installation failures may occur. And this can lead to very sad consequences. But first things first.
Reset BIOS and install priority boot media
First, reset the BIOS to the default settings. To do this, you first need to get into this menu. For different computers and laptops, there are various buttons. But basically these are keys like F2, F12, Enter, Delete, or Tab. After entering the BIOS, you need to go to the Load setup defaults tab and just click on "Enter". Now you need to set the boot priority from the disk (in older versions of the motherboard.) To do this, go to the "Boot Priority" menu, select "1st Boot Device" and put a CD-ROM in the box next to it. After that, press the F10 button ( rebooting the computer and saving the settings.) Now we insert the disk into the drive and move on to the question of how to install Windows 7 from the disk.
Step one. Actions immediately after the computer boots
In some cases, when installing Windows from a disk, you need to press any button on the keyboard to activate the installer download. If this is not done, then the system will try to boot from the hard drive. After pressing any button, the installer will start loading. Usually this process is pretty fast. Then the user will be asked to select the installation language, time format and keyboard layout. Everywhere you need to put down "Russian". In some assemblies, this language and region is the default. After clicking on the "Next" button, you will be prompted to install the operating system by clicking the appropriate button. Next, the user will be prompted to select the Windows edition. Such a thing is relevant for pirate assemblies. Better to choose the "maximum" version. After clicking the “Next” button, the installation wizard will clarify whether you are going to reinstall the entire operating system again, or you can simply restore it. It is better to select "Full installation (Advanced options)." How to install Windows 7 without a disk? This is also possible, but only with a USB stick. Installing in this way is even more convenient, since the reading speed is higher. So, the operating system will install much faster. However, we were distracted. We pass to a disk marking.
Step Two Correct HDD Partitioning
There are several options: either you install the OS on a brand new (pristine clean) hard drive, or the HDD is already occupied by files, and before that there was already some kind of operating system on it. There will be one outcome: new markup and formatting. The dialog box for working with partitions appears immediately after selecting "Full installation". It suggests choosing the volume on which you want to install Windows 7. The disk partition must meet some requirements. So, the recommended file system is NTFS. On another "Windows" just does not install. It is also necessary to take into account that the system reserves a certain place (300-500 megabytes for its needs). In general, it is recommended to delete the old partition (on which the OS was once located) and create a completely new one. Simple formatting is clearly not enough here. There is also such a thing as a GPT disk partition. How to install windows 7 on it? Similar. The difference is only in the type of markup. Moreover, the GPT table does not support a large number of partitions. And so - no difference. After creating the section and selecting it as suitable for installation, click "OK". File copying and the installation of the operating system itself will begin.
Step Three Entering the necessary data and basic settings
These actions must be performed after the computer is rebooted before the last stage of system installation. First, the installer will ask the user to enter their name and somehow name their computer. Any names can be used. There is only one caveat: the computer name should consist only of Latin letters and numbers. But the username can consist of anything. After clicking the “Next” button, the installation wizard prompts you to enter the product license key. If you are using a pirated assembly, then click the "I do not have a key" button. If there is, we enter and click the "Next" button. Now the wizard will offer you to select security settings. They include setting up automatic system updates, enabling the Windows Firewall, and other options. If you intend to use a third-party antivirus product and do not want to receive updates from Microsoft, then select the "Postpone decision" item. If you need all this, then leave the default values. The next step is to set the time and time zone. For Russia, choose the appropriate region. The correct time will be set automatically. If you have a wired Internet connection, the system will prompt you to connect immediately and select the type of network. For now, skip this action. After clicking the “Next” button, the installation process will continue. The final stage will begin. Some users keep asking how to install Windows 7 without a disk or flash drive. While this is not possible. Any bootable media is required anyway. Without this it is impossible.
Step Four Driver installation
This is a very responsible step, since the first steps after installing the operating system decide how well it will work. Before that, you can remove the Windows 7 disk from the drive. You can install drivers on your computer without it. First of all, you need to install all the necessary drivers. The order in which they are installed does not matter. After successful installation, restart your computer or laptop. There is one caveat: drivers for a video card are usually put in the very least. It is not clear what this is connected with, but a certain number of system failures are known if this particular software was installed first. As you can see, installing Windows 7 from a disk via BIOS is not so difficult. Further setup of the operating system will take much longer.
Step Five Service Setup
The next step is to configure the services. For example, if you do not have a printer, then you do not need the “Print Manager Service” for nothing. It is recommended to disable it. It is very easy to do. You need to open the "Control Panel", select "Administration", the sub-item "Services". Having found the required service, you need to right-click on the name and select "Properties". If the service is running, then you need to click on "Stop". And then in the line where it says "Startup Type", select "Disabled" and click "OK." You should also deal with the services of the firewall and automatic system updates (if you do not plan to use them). So, how to install Windows 7 through the disk and configure it, we already understood. Now we turn to the recommendations for installing basic applications.
Step Six Install antivirus and other programs
After completing these steps, it is recommended that you restart your computer. Now you can install the antivirus product and connect to the Internet. Installing other applications is also possible. First of all, you need to install the most important applications. That is, those that will be used most often: office, players, browser, torrent client and more. Heavy foods (like Photoshop) should be left for later. What if something goes wrong? By the way, when installing pirated software and using a variety of "cracks" and "keygens" it is strongly recommended that you create a system restore point. If it is, then it will be possible to return the early state of the OS without reinstalling it. This will save a lot of time and nerves. Installing Windows 7 from the disk via BIOS turned out quite well. As well as make basic OS settings.
Conclusion
The answer to the question of how to install Windows 7 from the disk is received. It is not as difficult as some people imagine. In fact, the installer will do everything himself. The user only needs to clearly follow the instructions and not engage in amateur activities. The main thing is to prepare bootable media and configure BIOS correctly. The rest should go fine. Unless, of course, the media (in this case, the disk) is not damaged. Then there may be problems. But this is unlikely.