Any person is so spoiled for convenience that it is not possible to think of his own apartment, cottage or house without communications, timely supply of water or heat. Fortunately, today progress has gone so far that it is possible to bring all the resources and communications a person needs in any, even the most difficult conditions. The rooms manage to heat even in the far north, where the temperature reaches -50, and any pipes burst. But even with such a development of science and technology, questions of the quality of the delivered services and goods still remain. And not just the quality of communication materials, but the quality of the water resource itself. They do not clean water so well today that the consumer, without fear, can drink it, prepare it. Even washing and ironing without fear will not work. Suddenly, the water has a high threshold of lime, and after a month you will have to just throw out some things, and take the washing machine, like an expensive iron, for repair. And the machine weighs a lot, for one transportation you have to fork out.
Ways to solve lime problems: remove scale
The sphere of water softening and purification in Russia today is reaching a qualitatively new level. Manufacturers appear who conquer not only the domestic market, but also enter the market of the fastidious European and American consumers with their goods.
Among the filters "Aquafor", "Geyser" the competition is quite strong, but probably only the filter from the AquaShield scum can oppose them. This is an electromagnetic development of a Russian institute. This device can be purchased in Russia. And, therefore, it costs significantly less than its foreign counterparts. Although the developer is in Ufa, but get You can even in the Crimea.
In addition to softeners, the problem of water hardness can be solved in other ways:
- Constant purchase of water.
- Manual plaque removal.
- Affordable home prophylaxis - vinegar, salt, sand.
The effectiveness of all these methods to combat the plaque is low. So far, nothing better than filtration and softening procedures has been invented. And at the same time, reagent-free devices like AquaShield have plenty of advantages over other devices. Although they do not give up those positions, despite the shortcomings.
New generation filter: what does AquaShield appeal to consumers?
Talking about the merits of a product, one can not help but mention the principle of work AquaShield. After getting acquainted with it, the process of prevailing consumer opinion becomes more understandable.
What is the process of irradiation with water infected with limestone? The device does not require any special manipulations. It is mounted, plugged in, and a powerful, permanent, magnetic core comes into operation. Under its influence, the salts inside the infected water also begin to change. Moreover, their standard behavior of adhesion and subsidence does not change. Their new silhouette now has the shape of a thin needle without an eye, unable to stick to a heated surface. In this state, salt needles can only scratch surfaces with old salt that has settled and hardened to a state of gypsum.
Overcome such deposits - oh, how difficult. But time and a new form help irradiated salt needles. They very gradually, but stubbornly loosen the sediment. And after about a month, the consumer sees the first results of such a contactless device. The loosened old scum in the form of sand and pieces begins to be washed out of household appliances.
A huge advantage of such a softening process is that the new salts do not stick to the walls, but help the consumer to remove unpleasant precipitation without his participation. And moreover, water, unlike a person, can easily reach any nook and cranny of a plumbing and heating or heating system. It is not necessary to disassemble bulky and heavy equipment with a stop of the entire production process.
But some maximally idyllic picture comes out. But in fact, there are also negative aspects to such an effect on water. Irradiation is safe for humans, but there is not even a simple filtering process. That is, inside the water, all hardness salts remain in place. This says only one thing. Electromagnetic devices work fine at the technical, production level, but to get such vital good drinking water, they are still rather weak. You will have to supplement them with other softening settings, so that the picture is complete.
Consumer Reviews on “Electromagnetic Uniqueness”
Electromagnetic filters from scale ("AquaShield" and not only) have lately become overgrown with legends. Many do not trust such a “WOW” effect from the operation of the device, many consider it to be greatly exaggerated. But those who have already tried to use such devices, for the most part leave good reviews.
Among the well-known customers of AquaShield, one can mention the well-known gas producing companies and oil refining giants. Various PREGOs and municipal services, whose main task is to provide their areas with hot water and heating in a timely manner, do not stand aside from reviews.
Many reviews indicate that the number of anti-scale flushing was reduced significantly. Control measurements of calcareous deposits began to be carried out less frequently. Equipment surfaces are strikingly cleaner. Heat exchangers began to work more efficiently and quickly. And at the same time, practically no one calls special teams to stop and clean the systems.
The reviews suggest that AquaShield works well with heat exchangers. The latter do not have to be disassembled even in the hottest season in order to eliminate the old lime dust. The device gradually irradiates a rather complicated design of a plate or disk heat exchanger by irradiation. For industries such as heating and water supply, this cleaning effect of scale filters is the main advantage when choosing the right softener.
Features of operation and installation of filters "AquaShield"
When working with such small devices as “AquaShield”, the consumer must remember the rules of operation and installation of these devices. Although the permanent magnets are quite unpretentious in use, the device will no longer generate one wrong movement and useful radiation. Or, it itself will become low-power and ... useless.
The first thing that attracts attention is the installation of systems. At first glance at a small AquaShield device with some wires, the consumer does not immediately understand what and where to fix it. Therefore, the installation should always be carried out, clearly fulfilling the requirements of the instructions that come with the device.
Installation of the AquaShield descaling filter can be done on pipes of any diameter and made of any materials. True, there should be some free space next to the device to be protected. The device is mounted by the hole located on the rear panel. To do this, you will have to drive a nail into the wall or screw a screw. You can also attach the device to a hook.
Wires that go from the housing should be wound around the irradiated pipe. Moreover, one wire is wound very tightly between the winding turns, in one guide side. The other wire is wound in the opposite direction. The ends of the winding are necessarily fixed with plastic rings. In case of need, you can fix them with electrical tape.
After all the manipulations, the descaling filters are connected to the network. The irradiation process has begun. The first one and a half weeks there will be no special effect and WOW results. Which actually causes unpleasant rumors about the device. But gradually, the new salts will begin to tear away the old deposits, and the long-awaited effect of cleansing and increasing the efficiency of the device will come.
Since the devices are equipped with a powerful magnet as the core, the consumer needs to be careful with sensitive devices and gadgets. This kid will easily spoil both water meters and magnetic latches. Nearby it is better not to keep such devices.
And another important feature of such filters: they need to be mounted on the pipe only after the inside of this section is clean or at least minimally clean from the old sediment. The passage of field rays through the old sediment is very difficult, and therefore the whole effect is lost at the root in the beginning. So it is better to first dismantle a small section of the pipe where it is supposed to fix the softener, and rinse it off the old scale, and if necessary, clean it with an old iron brush. So the efficiency of the device will soon prove to be positive.