Little can be compared with a walk in a clear coniferous forest, which smells of cones and mushrooms. And no one can deny himself the pleasure of going to a Russian bathhouse, hot and fragrant, with the aroma of a birch broom and resin droplets protruding from the heat.
But a walk among the pines, and a good bathhouse can lead to the same trouble, namely, tar in the hair. A sticky substance entangled in locks can make life very difficult. Therefore, when this problem is detected, you need to decide how to remove the resin from the hair on the head. Fortunately, there are many ways, and everything necessary for the procedure is in every house.
Vegetable oil
How can you remove the resin ? The most affordable remedy is vegetable oil, olive or sunflower. They need to generously lubricate the area with the resin, and rub it into a tangled hair clump. After a while, it will become more pliable, the resin will begin to lag behind the hairs a little, then it needs to be carefully combed out with a comb with small teeth.
After the resin is removed, the head needs to be washed several times with shampoo to wash off the fat from the hair. Then rinse your head with conditioner, which will make it easier to comb clumping hair.
Baby cream
Vegetable oils are not the only fat-containing product that can help deal with gum. How to remove tar from hair after a bath? For this purpose, a baby cream is perfect. And this is the most gentle, affordable and enjoyable tool. The cream smells good, it is hypoallergenic, softens the skin if particles of resin are on it and reduces irritation. It can be used by both adults and children.
The resin is removed using a baby cream as follows: the product is rubbed and then brushed off with a thick brush along with the resin. Repeat the desired number of times, then wash off the remaining cream with soap.
How to remove tar from hair with other fat-containing products? This is done by the same method, and peanut butter, mayonnaise, petroleum jelly, massage oil, body milk, etc. can be used as analogues.
"Coca Cola"
Coca-Cola is a very healthy drink in the household. You can drink it, and they clean the bath from rust, and rid the kettle of limescale. The activity of the drink is explained by its composition: carbon dioxide and phosphoric acid are present in Coca-Cola (by the way, it causes thirst, which makes it almost impossible to get drunk with cola). The same components are found in other sweet soda, such as "Fant" or "Sprite".
And they will help get rid of the resin in the hair. How to remove tar from hair with cola? To do this, prepare a solution: 0.5 l. soda at ½ tbsp. l baking soda. Stir and dip the spoiled strand into the solution for 10 minutes. Rinse hair thoroughly with shampoo.
Turpentine
The next method, how to remove tar from hair on the head, is based on the application of turpentine. You just need to purchase a special purified gum turpentine, which, unlike its technical counterpart, does not cause burns, irritation or redness on the skin. At the same time, it softens the resin well.
The recipe is as follows: 2 tbsp. l dilute starch with 8 drops of high purity turpentine and add 6 drops of ammonia. The resulting mixture is applied to the problem area, the resin is softened and combed out of the hair. Then ringlets need to be washed thoroughly with shampoo.
Acetone
How can I remove pine resin from my hair ? Acetone and its substances can cope well with a sticky substance. For example, nail polish remover. The procedure for working with acetone is as follows:
- Exit to a well-ventilated area.
- Apply a little solvent to the cotton pad.
- Attach to gum for 5 seconds maximum.
- Scrub the resin with the same disc.
- Rinse hair well with plenty of shampoo.
Acetone can not be used when it is necessary to remove the resin from the hair in children or people with a high sensitivity to the solvent. Also, this method cannot be used for those who have diseases of the respiratory system. It is strictly forbidden to open the solvent in closed rooms, since its vapor is toxic.
Also in stores you can find solvents for epoxy resin - DMSO and DMF. Both will cope well with wood resin, but it is absolutely impossible to use them to cleanse hair and body! They are extremely dangerous and toxic.
In addition, you can not use the wash SP-6 or any acid other than citric acid. These substances cause severe chemical burns!
Lemon acid
How to remove tar from hair with citric acid? It is still the same chemical solvent, only softer and safer. In order to get rid of wood resin, you need to:
- Take a sponge and moisten it with warm water.
- Pour citric acid onto a sponge.
- Wipe tar off hair.
- Rinse with warm water, rinse hair with shampoo.
Instead of citric acid powder and water, you can use natural lemon juice - it is applied to a cotton pad and the sticky substance is wiped off.
This substance is not recommended to be applied to areas near the skin, as it can cause irritation. If there is damage on the skin, then it is better to use another remedy.
Alcohol
The next method, how to remove tar from the hair, is to use ordinary alcohol. From strong alcohol, the resin is soft and viscous, and it is easy to clean it with a cloth or cotton pad. But vodka is not suitable for these purposes, since there is an insufficient concentration of pure alcohol in it. Therefore, you need to purchase the usual 95% medical alcohol. And since it is now sold only by prescription, you can arm it with its analogue - ant alcohol. Or buy an old-style men's cologne - “Shipr” or “Russian Forest”. They are still found in stores.
Alcohol is good in that it softens the resin, and at the same time it quickly evaporates from the surface of the hair. Moreover, it is safe to use: for adults and for children.
Cold and heat
How to remove wood tar from hair with heat or cold? The action of this technique is based on the fact that when cooling, the resin is hard and crumbles easily, and when heated, it flows like water and can be easily removed with a cotton swab or towel. However, in reality it is quite difficult to achieve this.
In order to get rid of sticky substance, it is often suggested to use an iron: shift the soiled strand between the layers of clean tissue and iron it well. So the resin is spread and absorbed. The method looks quite dangerous, since it will have to act with a heavy and hot object near the face. People with short hair, in principle, will not be able to use this method.
It is also difficult to remove the resin with the help of cold: in order for the resin to harden, it must be placed in the freezer. If you try to cool it with pieces of ice, then it will never harden to such a state that it is easy to crumble and leave no residue.
So, in theory, both methods are good, and they work well when you need to remove the resin from clothes. But with hair it is better to use some other means.