This article describes a universal algorithm of how to enter Lenovo into BIOS. Most often, this operation is performed during reinstallation of the operating system or in the event of a malfunction. If everything is clear with stationary PCs, then you have to tinker with laptops, since there are several options available and you need to find out which one is suitable for this particular device.
Documentation
You can get the answer to the question "how to enter Lenovo BIOS" in the documentation that comes with the device. For desktop PCs, this is the motherboard user manual. It has a whole section devoted to this issue. In addition to the procedure for entering the basic settings, each parameter is also described in detail here, as well as its possible values. In most cases, the Del key is used for these purposes. In the case of a laptop, the situation becomes more complicated. There may be various options. And one way to find out the one that is used in your case is to study the instruction manual. It necessarily describes the procedure for entering the basic settings of such a device as a Lenovo laptop. You can enter the BIOS using one of three options: F1 or F12.
the Internet
The paper version of the documentation is not always saved. This is especially true for those devices that have been in operation for more than three years. But there is nothing wrong with that. In such a situation, the official website of the manufacturer should come to the rescue. There are always electronic versions of all operating manuals. But here one important point should be noted. In the case of a stationary PC, you need to go to the website of the motherboard manufacturer. But in the case of a mobile PC, we apply for documentation on the Lenovo website. The operation manual should be on this resource.
Screen
Another way to find out the key that is used to access the basic settings is to carefully review the boot process of the laptop. To be more precise, the first window with the equipment parameters. If you see the logo of the device manufacturer, then press Esc. Pay attention to the line "Press b to setup". Instead of b, F1 or F12 must be indicated. This is the answer to how to go to Lenovo in Lenovo. This method is universal and can be used not only on the products of this Chinese manufacturer, but also on any other company.
Enter BIOS
Well, now we’ll directly deal with how to enter Lenovo in Lenovo. It is important to understand that this can only be done in the process of testing the equipment while turning on the PC or rebooting it. In turn, it is impossible to access the basic settings of a personal computer in the operating system. When the first window appears (it can be either a window with PC parameters or the manufacturer’s logo) we press the key that was clarified at the previous stage. After the line "Press b to setup" (instead of b should be the key that is used to access the BIOS) changes to "Entering to Setup", release it. At the end of the collection of information, a window with "BIOS" will automatically open. Now you can make the necessary changes to the values. At the end, they must be saved by pressing F10 and answering "Yes" in the next request.
Conclusion
As part of this material, it was described how to go to Lenovo in Lenovo. The easiest way to do this is on a stationary system unit. In this case, only one key is used - Del. But in the case of a laptop, everything is much more complicated. Various options are possible: F1 or F12. Which one is used on your mobile PC can be easily and simply found out by following the instructions in this article. Well, then it will not be difficult to enter the system of basic settings of the computer of this manufacturer.