Not every workshop requires a thicknesser. For example, in a country house, where from time to time it is necessary to saw a couple of boards, it is not needed at all, because such an acquisition cannot be called the cheapest. But if you decide that the machine should be purchased, then for a start it is important to get acquainted with its features and characteristics, as well as determine the upcoming volumes of work.
Before making a purchase, you should find out that the described machines can be classified by the amount of load. If you are used to performing many tasks in a personal plot, then it is better to purchase a combined installation. But when it is necessary to process a large batch of wood from time to time, then it is worth paying attention to budget-friendly semi-professional type machines. Professional units are suitable for large workshops, for example, for timber processing plants. Among other market offers, the Jet gage should be highlighted, which will be discussed in the article.
Reviews about the features of the model JWP-12
You can purchase this equipment option for 21,600 rubles, which, according to consumers, is an acceptable cost for such a device. The device is a portable tool for working in construction sites and carpentry workshops. With the help of the unit you can plan wooden blanks.
The design provides for a folding table for comfortable work. Reysmus "Jet 12" has a dust collection system to which you can connect a vacuum cleaner. According to users, this add-on is very convenient to use. If the model overheats, then it will automatically turn off, which will avoid premature failure.
During operation, the equipment uses two knives, which are based on high-speed steel. These elements rotate at a speed of 9,000 rpm, which ensures high quality processing. In one pass, according to home craftsmen, you can remove 1 mm of the top layer across the width of the part.
Reviews on the technical specifications of the model
The Jet gage, the reviews of which you must read before going to the store, is powered by a 220 V network. The planing depth reaches 2.5 mm. The maximum processing width, according to customers, is quite large and equal to 318 mm. Case dimensions are 580x560x465 mm.
The design provides for the presence of a belt drive. Equipment weighs a little - 33 kg. The minimum thickness of the workpiece reaches 6 mm. Details, as emphasized by home craftsmen, move with a rather impressive speed of 7 m per minute. Jet blades have the following dimensions: 319x18x3 mm. The diameter of the suction port is 100 mm. Power consumption is 1800 watts.
Reviews on the benefits of the model
If you do not know what equipment to give preference to, then you should consider the positive features of a particular option. The JWP-12 machine is no exception. According to customers, opinions about it quite often help to make the right choice.
Among other advantages, buyers highlight:
- quick setup;
- simplicity of management;
- accuracy in work;
- convenient transportation;
- compact design;
- resistance to vibration.
As for the quick setting, it is provided with a handle, with which you can adjust the height of the blade shaft. Reysmus "Jet" has one important plus, which is the ease of management. This question will not cause any difficulties for the consumer, because only one button is provided for starting and stopping.
On the side panel is a millimeter scale for accuracy. Buyers like the convenience of transportation. It is guaranteed by handles located on the sides of the case. The design is quite compact. The falling and receiving tables are folding, so the operator can fold the structure if necessary, transportation or storage. When assembled, the machine is quite small.
It is resistant to vibration during operation. This feature is provided by holes in the base of the unit. Using them, the device is attached to the support or workbench with anchor bolts.
Reviews on the main features of the model JWP-16 OS
An alternative proposal from the manufacturer is the JWP-16 OS Thicknesser Jet, which, according to consumers, has a rather high cost of 99,800 rubles. The unit is a professional solution and is suitable for operation in production conditions where planing of workpieces with a height of up to 15 cm is required.
It is based on a powerful engine that is able to stably operate under high loads for a long time. Depending on the size and hardness of the workpieces, the operator will be able to choose the feed rate, which is 5 or 6 m per minute.
Reysmus "Jet" has smooth steel shafts that do not damage the part. According to the masters, this contributes to an even supply of the element to the knife shaft. Tables are removable, which facilitates not only transportation, but also storage.
Reviews on the technical specifications of the model
In order to form a correct opinion about the JWP-16 OS machine, it is necessary to consider its technical characteristics and get acquainted with the opinions of consumers about them. This machine is a thicknesser and provides a working width of up to 405 mm. Depth of planing is 5 mm.
The rotational speed of the planer shaft is 4,500 rpm. You may be interested in the size of the knives, which is equivalent to 410x25x3 mm. The overall dimensions of the machine itself are 1220x813x1295 mm. According to consumers, the weight of the equipment is quite impressive and equal to 215 kg.
Benefit Reviews
Among the main positive features of the above machine model, consumers consider:
- long service life;
- simplicity of management;
- smooth setup;
- convenient supply of blanks;
- rigid construction.
As for the service life, it is extended due to stiffeners and ventilation holes. The engine cools efficiently during operation. Managing equipment, according to operators, is quite simple. This question will not cause difficulties, because a minimum of buttons is provided for stopping and starting.
The setting is smooth. The rotating flywheel is responsible for this. You can supply blanks using a table equipped with movable rollers. The design is characterized by high rigidity. This feature is guaranteed by metal ties.
Reviews on the main features of the JJ-6L-M planer
You can get this Jointer jointer planer for 51 500 rubles. The equipment is a semi-professional device, which is convenient and accurate. The unit operates due to a powerful asynchronous motor, which contributes to efficiency and high reliability.
The model has a cover for collecting chips. According to consumers, this allows you to keep the workplace clean. Tables are equipped with adjusting screw mechanisms. They can be adjusted in height. To cope with this work, according to the masters, you can quickly and easily. To change the angle of inclination, the manufacturer provided for the jointing stop.
Technical Specifications Reviews
The picture will not be complete if you do not consider the main technical specifications. A great addition to them will be the opinions of consumers. For example, the depth of planing, according to those who have already managed to test the described device, is quite impressive and reaches 3 mm. The maximum processing width is 150 mm.
Knives have the following parameters: 155x19x3 mm. The size of the working table is also important, it is 1215182 mm, but the overall dimensions of the machine body are 12156501050 mm. It is important to take into account reviews about impressive weight, it is equivalent to 103 kg. The diameter of the suction port is 100 mm.
One common malfunction is the drive shaft brake.
If during the operation of the machine you noticed that the traction shaft of the Jet thicknesser is slowing down, you can mill a new groove for the key or weld the end of the shaft by turning a new veneer and thread. Please note that the shaft metal is very soft.
Some craftsmen carry out fusion argon welding. It is important to consider that during surfacing the shaft can lead, re-centering will occur. In this case, the shaft must be machined in the centers until the seat is clean.
Finally
Spare parts for the Jet planer you will certainly need. Therefore, when buying equipment, it is important to assess how much their cost is higher or lower compared to consumables for equipment from other manufacturers.
For example, you can buy carbon brushes for 120 rubles, and a ball bearing for 210 rubles. A bevel gear costs 120 rubles, and a chain sprocket costs 150 rubles. The sliding bearing, which is also called the sleeve, will cost 120 rubles. You can buy a chain and an overlay for a pulley for 740 and 300 rubles. respectively.