Today, in the world of modern technology, smartphones play a huge role in our lives. Itâs already hard to imagine how people didnât use phones several decades ago. Not even modern smartphones, which have a huge number of useful functions, but simple phones to just make calls. Of course, you will not surprise anyone with new devices, they have become simply a necessity.
Unfortunately, smartphones can break at any moment, do not even fall and crash, but simply pick up a virus and stop turning on. What to do in this situation? If the phone does not turn on or freezes, then you need to reflash it. Let's look at how to flash âAndroidâ through âRecoveryâ.
Troubleshooting. What to do if the phone does not turn on or freezes?
It doesnât matter if you have a new device from Samsung or an old phone from a Chinese company, they can start to freeze at any time or stop turning on at all. Before flashing your device, you need to try resetting the smartphone to the factory settings. Of course, this can only help if you have a full memory or software crash. How to do it? We go into the settings, go to the âRecovery and resetâ tab (perhaps it is called differently for you) and click on the âReset to factory settingsâ button. After that, your smartphone will clear all memory and reboot.
If this does not help you, then you should try installing a new firmware. With what it can be connected? Typically, various phone crashes cause viruses that cannot be cleaned up by simply resetting the settings. Malicious files creep into system files that are not cleaned up during system recovery. The new firmware contains other files in which there will be no viruses. If you do everything right, then get rid of viruses and problems associated with them. First you need to consider how to flash âAndroidâ through âRecoveryâ.
What is Recovery?
Flashing the phone is quite simple, so do not immediately run to the service center to troubleshoot. So you can save a considerable amount. Re-flashing the device will cost you 500-1000 rubles. How to flash âAndroidâ from a flash drive through âRecoveryâ? Before we look at this, we need to understand what Recovery is. This software, with which you can return the smartphone to the factory settings or reinstall the system. It is contained in all devices running the Android OS. If you did not install additional files, then you will have a simple âRecoveryâ, which is enough to install the firmware. If you want to install redone software, you will have to install custom Recovery.
How to flash âAndroidâ through âRecoveryâ? Menu
Before installing new software, you must log in to Recovery. It resembles the BIOS that is present on a regular computer. To find out how to flash âAndroidâ through âRecoveryâ, you need to enter the menu of our software. How to do it? First, turn off our smartphone. To enter the required mode, you need to press the "Volume +" button, the "Home" button and after a few seconds the power button. You may not be able to log in this way, since there are various combinations to enter the Recovery (the article describes the most common method).
What else is needed?
Before you proceed to install the new firmware, you need to rummage around on the Internet and find a suitable version. As a rule, they are not on official sites, so many users create backups, which they later reinstall on their device or upload for other users. You can find firmware on special sites, the most popular is w3bsit3-dns.com. Perhaps you are an advanced user, and you are already tired of the usual firmware. It is for such people that they make some changes to the standard set. To install the redone firmware, you need to install custom Recovery.
How to flash âAndroidâ through âRecoveryâ? Instruction manual
You must understand that you are flashing the device at your own peril and risk. If something goes wrong, then you will no longer fix the phone under warranty. Of course, if you are determined to reflash your smartphone, you need to find the appropriate firmware.
The installation process is quite primitive. First, download the appropriate software and transfer it to the deviceâs memory or to the memory card. Then we go to the "Recovery" and select Apply update from external storage. You must confirm your actions for the installation to begin.
Once the flashing is completed, you need to click on the Wipe data / factory reset button. This will clear all information about old software.
At the last stage, it remains only to click on the Reboot system now button . Your device will start to boot with the new firmware. That's all. How to flash âAndroidâ through âRecoveryâ? Now you can answer this question. There is nothing complicated, you just need a little time and attention.
How to restore old software?
Perhaps you installed a custom version of the firmware, and you did not like it. How now to return everything to its place? Unfortunately, there is no button that could just return the old settings. To return the stock firmware, you must reinstall the software on your device. You download the usual firmware, which is suitable for it, and install it through the Recovery.
Conclusion
How to flash an Android phone through Recovery? As you already noticed, there is nothing complicated in flashing the device. The main thing is to follow the recommendations. In an hour you will receive an updated phone that will work perfectly.